固体推进剂中有关粒度分布的数学处理

介绍了固体推进剂中有关颗粒度分布的数学处理方法，用几种数据统计分析的理论分布函数－正态分布，对数－正态分布，Ｋ分布，并以铝粉和含铝推进剂燃烧残渣的颗粒分布为例进行了分析，根据Ｃｕｌｉｃｋ微粒阻尼的理论计算模型，讨论了粒度分析在阻尼效应计算中的应用。     

低速爆轰管对黑火药的点传火性能研究

文章采用中心点火管结构的实验装置研究了黑火药的点传火性能。用低速爆轰 (L VD)中心点火管来点燃黑火药时 ,1# ～ 3# 大粒黑药的传火速度为 70 0 m· s-1～ 80 0 m· s-1数量级 ,燃烧波宽度在 3.1ms～ 3.5 ms,最大压力峰值 :1# 为 36 .4 MPa,2 # 为 2 4 .0 MPa,3# 为 38.0 MPa。用普通中心点火管点燃黑火药时 ,2 # 、3# 和钝化 2 # 大粒黑的传火速度分别为 6 1.2 m· s-1、6 8.2 m·s-1和 4 0 .1m· s-1,最大燃烧波宽度分别为 9.2 ms、6 .3ms和 9.5 ms。燃烧波表明 ,L VD中心传火管与普通中心传火管相比较 ,在传火管的不同位置处 ,前者的 P- t曲线一致性远高于后者。     

Bulk modification of styrene–butadiene–styrene triblock copolymer with maleic anhydride

The bulk modification of SBS rubber with maleic anhydride in a mixing chamber of a Haake rheomixer was studied. The effect of temperature, maleic anhydride, and benzoyl peroxide concentrations on the grafting efficiency was evaluated. High grafting efficiency was achieved when the ratio of peroxide and maleic anhydride concentration was high. On the other hand, on this condition high insoluble fraction was generated. The addition of a diamine, 4,4′‐diaminediphenylmethane to the reaction mixture minimizes the amount of insoluble polymer. However, the grafted MAH content also decreases. The graft copolymer was characterized by infrared spectroscopy and the grafting extension was determined by titration. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2953–2960, 2002; DOI 10.1002/app.10355     

纳米氧化铟粉体的形貌与结构研究

用湿化学法制备了纳米极氧化铟超细粉体。利用透射电子显微镜、图像分析仪研究了纳米氧化铟粉体的形貌、尺寸分布和结构特征。结果表明，氧化铟粉体呈方片状，尺寸在10-30nm，化学组分高纯，达到了纳米级粉末要求；粉体的尺寸均匀，但在不同条件下制得的粉体，其尺寸相差较大；制备得到的氧化铟超细粉体的结构为体心立方。     

鱼雷罐喷粉预处理优化研究

在已经得到的描述鱼雷罐喷粉处理基本参数具体表达式的基础上，运用多目标非线性优化方法，对工艺操作参数进行优化。     

撞击流管式反应制备超细氧化锆粉体

我国氧化锆粉体产业目前基本上“精进粗出”，迫切需要开发氧化锆粉体备新工艺，特别是具有高附加值的纳米氧化锆粉体制备技术，液相反应沉淀法具有成本低，易于工业化等优点而成为研究的热点。本文采用撞击流管式反应新工艺，撞击流接触反应强化了过程的微观混合。实现了均匀成核，使得成核过程易于控制，而管式反应器的独特设计克服了返混，因而使得反应沉淀过程易于控制，粒子分布窄。用该工艺结合醇热处理表面改性制备的超细氧化锆粉体。平均粒径约为14nm，粒度分布窄并无硬团聚发生。该方法过程简单，易于工业化大生产。     

影响凹印铜金粉印金光泽度的主要因素

在研究国内外铜金粉的微观形貌、厚度、水面遮盖率、定向排列、光泽度和粒度分布的基础上，分析了影响凹印铜金粉印金光泽度的主要因素。结果表明，国产铜金粉颗粒级差大、细小颗粒所占比例过多、金属片太厚、水面遮盖率小、定向排列不好等是影响国产铜金粉印金光泽度的主要因素。     

粉末冶金铁基烧结炉的现状与展望

评述了国内外粉末冶金铁基烧结炉的发展动向和具体改进装备。即功能带设计、脱蜡装置,烧结带气氛控制,淬火带的设想,加热元件配置及新型可塑性耐火材料。     

Ischemia‐reperfusion injury. A phenomenon,that also occurs in the bone

Ischemia‐reperfusion injury of the bone occurs due to traumatic and non‐traumatic alterations affecting blood supply to the bone. It is likely to occur also upon insertion of an implant. Ischemia‐reperfusion injury of the bone has been studied by interruption of blood supply in situ, in limb replantation/transplantation models, in revascularized bone grafts and non‐vascularized bone fragments, as well as in isolated cultured cells. All cells of the bone are affected, including osteoblasts, osteocytes, osteoclasts, chondrocytes, and bone marrow cells. Critical ischemia times for induction of bone cell death, either in the ischemic period or following reperfusion, are in the range of 3 to 7 h. These critical ischemia times are significantly increased by decreasing the temperature from 37 °C to 0–4 °C. Anoxia is the most likely trigger of cell injury in the ischemic phase. In the reperfusion phase, reactive oxygen species are decisively involved in the injurious process. In general, however, the available information on the mechanism of ischemia‐reperfusion injury of the bone is relatively sparse. On the other hand, there are clear similarities to the mechanisms of ischemia‐reperfusion injury known from other organs, and there is a clear potential for protection against ischemia‐reperfusion injury of the bone.     

高合金铁基烧结材料在轧钢导位中的应用研究

本文研究了高合金铁基烧结材料在轧钢导位中的应用。实验表明,通过粉末冶金液相烧结技术,可以获得具有优良综合性能的制品,材料密度ρ≥7.5 g/cm3,硬度≥55 HRC,抗弯强度≥1 000 MPa,冲击韧度αk≥3.9 J/cm2,满足了轧钢导位辊的工作要求。材料利用率可达95%以上、降低了制备成本。使用寿命是普通轧辊寿命的3~6倍,适用于线材和小型型材的轧钢生产。