后工业时代米兰单功能城区更新

在物化的形式上,解释米兰城市发展历史上的单功能城区的改造意义,并由此分析单功能城区更新的经验:单功能城区向混合居住模式的更新是发展方向;城区的功能重新定义对城区发展有重要意义;以新的建设为基础,发展城区自身的特色,做到城市在更新和特色之间的协调。     

A real-time planning algorithm for obstacle avoidance of redundant robots

A computationally efficient, obstacle avoidance algorithm for redundant robots is presented in this paper. This algorithm incorporates the neural networks and pseudodistance function D _p in the framework of resolved motion rate control. Thus, it is well suited for real-time implementation. Robot arm kinematic control is carried out by the Hopfield network. The connection weights of the network can be determined from the current value of Jacobian matrix at each sampling time, and joint velocity commands can be generated from the outputs of the network. The obstacle avoidance task is achieved by formulating the performance criterion as D _p>d _min (d _min represents the minimal distance between the redundant robot and obstacles). Its calculation is only related to some vertices which are used to model the robot and obstacles, and the computational times are nearly linear in the total number of vertices. Several simulation cases for a four-link planar manipulator are given to prove that the proposed collision-free trajectory planning scheme is efficient and practical.     

原油换热网络Simulink动态仿真中提高运行速度的问题

提出状态空间离散化的思想,建立换热器的动态机理模型,然后通过Simulink模块化进行连接,对换热网络进行动态仿真。在大规模原油换热网络的仿真中,采用存储初值和切断代数环的方法,使换热网络的收敛速度得到了很大的提高,为复杂换热网络的动态仿真和实时优化打下了基础。这种方法,还可适用于一般石油化工过程装置的大规模动态仿真运行中。     

一种基于光照变化补偿的颜色识别方法

针对RoboCup中型组足球机器人比赛中光照变化会使颜色发生色彩漂移,影响颜色识别的准确性问题,提出一种基于光照变化补偿的颜色识别方法。该方法首先利用球的历史信息预测球的位置,然后在较小的区域内用基于色调直方图反向投影的方法找到球后,通过球的亮度直方图的变化计算出光照变化率,用于动态补偿颜色查找表。实验表明该方法能提高颜色识别的光照自适应性。     

Robust pole assignment for incomplete nonlinear decoupling applied to robots

A robustness analysis and synthesis for incomplete nonlinear decoupling for a class of nonlinear systems is discussed. Rigid and elastic-joint robot models belong to this class. For the elastic case, a transformation facilitates the robustness analysis under a weak assumption. Charts with H ₁- and H - norms of closed-loop disturbance transfer functions of the nonlinear-decoupled system are presented for a robust pole assignment.     

An Intelligent Robust Tracking Control for a Class of Electrically Driven Mobile Robots

This paper addresses the problem of designing robust tracking control for a class of uncertain wheeled mobile robots actuated by brushed direct current motors. This class of electrically‐driven mechanical systems consists of the robot kinematics, the robot dynamics, and the wheel actuator dynamics. Via the backstepping technique, an intelligent robust tracking control scheme that integrates a kinematic controller and an adaptive neural network‐based (or fuzzy‐based) controller is developed such that all of the states and signals of the closed‐loop system are bounded and the tracking error can be made as small as possible. Two adaptive approximation systems are constructed to learn the behaviors of unknown mechanical and electrical dynamics. The effects of both the approximation errors and the unmodeled time‐varying perturbations in the input and virtual‐input weighting matrices are counteracted by suitably tuning the control gains. Consequently, the robust control scheme developed here can be employed to handle a broader class of electrically‐driven wheeled mobile robots in the presence of high‐degree time‐varying uncertainties. Finally, a simulation example is given to demonstrate the effectiveness of the developed control scheme.     

可重构电解加工机床研究

电解加工机床通常是根据用户具体需求单机生产，机床研制周期长、设计重复、成本高。为此，提出采用开放式控制系统、模块化思想开发可重构电解机床，并对机床的机械部分、控制系统及通信系统进行了研究。     

一种引入通信的多移动机器人编队方法*

提出以视觉跟踪为基础并引入通信进行多机器人的编队控制方法,根据需要编写了一种新的通信协议,采用闭环l-Φ实现编队算法.这种多机器人编队控制避免了视觉系统的局限,能够更好地在复杂未知环境中协作完成任务,解决了编队控制的无反馈和实时性不高的问题,使得机器人能够准确迅速地进行跟踪和通信编队,一起顺利达到目标点.试验结果证明了该方法的有效性.     

Cable-direct-driven-robot (CDDR) with a 3-link passive serial support

Cable-direct-driven-robots (CDDRs) provided with a passive serial support represent an interesting and rising evolution of planar cable robots. The paper is devoted to present and analyze a novel CDDR robot. The robot consists in a fully actuated CDDR supported against loading normal to the motion plane with a 3-link passive planar serial manipulator. This hybrid structure combines positive features of both parallel and serial architectures, and prevents out-of-plane movements without the necessity for the robot to be supported on the motion plane. The adoption of a 3-link serial manipulator ensures a greater workspace area compared with similar structures that adopt a smaller number of links, and improves specific characteristics of their dynamics. Nevertheless undesired oscillations may occur since the serial manipulator is underconstrained. For this reason damping elements are inserted in the structure. Simulation examples are presented to demonstrate the novel CDDR concept and its dynamics. In addition, a strategy to select proper values of damping coefficients is presented.     

An open-source multi-DOF articulated robotic educational platform for autonomous object manipulation

This research presents an autonomous robotic framework for academic, vocational and training purpose. The platform is centred on a 6 Degree Of Freedom (DOF) serial robotic arm. The kinematic and dynamic models of the robot have been derived to facilitate controller design. An on-board camera to scan the arm workspace permits autonomous applications development. The sensory system consists of position feedback from each joint of the robot and a force sensor mounted at the arm gripper. External devices can be interfaced with the platform through digital and analog I/O ports of the robot controller. To enhance the learning outcome for beginners, higher level commands have been provided. Advanced users can tailor the platform by exploiting the open-source custom-developed hardware and software architectures. The efficacy of the proposed platform has been demonstrated by implementing two experiments; autonomous sorting of objects and controller design. The proposed platform finds its potential to teach technical courses (like Robotics, Control, Electronics, Image-processing and Computer vision) and to implement and validate advanced algorithms for object manipulation and grasping, trajectory generation, path planning, etc. It can also be employed in an industrial environment to test various strategies prior to their execution on actual manipulators.