配置抗冲切钢筋的混凝土异形柱-板柱连接试验研究

在9个柱截面为三种典型异形柱(十字形、T形和L形) -板柱连接未配置抗冲切钢筋时的冲切特性试验基础上,以十字形柱-板柱连接为代表,通过三个配置抗冲切钢筋试件与三个未配抗冲切钢筋试件的对比试验,研究了异形柱-板柱连接配置抗冲切钢筋后的冲切特性,同时将锚栓和箍筋的抗冲切性能进行了对比。试验结果表明,抗冲切钢筋可以有效地提高板的受冲切承载力和延性,在改善延性方面,锚栓比箍筋更有效。另外,将国外几个主要规范ACI3 18、BS8110及MC90 ,关于对非矩形荷载面冲切临界截面周长的规定进行了比较,从试验结果看,ACI3 18规范的取法更合理。     

钢筋混凝土非正常裂缝的产生原因及应对措施

根据钢筋混凝土结构中非正常裂缝的种类，分析了各种裂缝的产生原因，并有针对性地提出了应对措施，以保证建筑物和构件安全和稳定地工作。     

樊口大闸加固工程中的爆破振动分析

在考闸墩上爆破开挖出新的闸门槽，在新浇混凝土附近进行底板爆破开挖，爆破振动对闸墩和新浇混凝土的影响值得重视；介绍了在樊口大闸加固工程中的爆破振动观测成果，并对爆破振动特性进行了分析。     

State of Practice for Positive Moment Connections in Prestressed Concrete Girders Made Continuous

Precast bridges are often constructed as single span for dead load, but continuous for live load. A diaphragm connection is provided for negative moment continuity. However, the connection may also be subjected to positive moments due to time-dependent effects. Because these moments may be large enough to damage the diaphragm or even the girders, a positive moment connection is often provided. This paper reports on a study to determine the types of positive moment connections used across the country and to identify potential problems with these types of connections. A questionnaire survey was conducted to assess the state of practice for precast prestressed concrete bridges made continuous. The survey provides valuable information on this type of bridge and updates a previous survey on this subject.     

Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures

In this study, analytical modeling of the tensile strength of hot-mix asphalt (HMA) mixtures at low temperatures was developed. To do this, HMA mixtures were treated as a two-phase composite material with aggregates (coarse and fine) dispersed in an asphalt mastic matrix. A two-phase composite model, which was similar to Papanicolaou and Bakos's [J. Reinforced Plast. Compos. 11 (1992) 104] model with a particle embedded in an infinite matrix, was proposed. Unlike Papanicolaou and Bakos's model, an axial stress was introduced to the fiber end to consider the load transferred from the asphalt mastic the aggregate. Efforts were also made to consider the effect of aggregate gradation, asphalt mastic degradation, and interfacial damage between the aggregates and asphalt mastic matrix on the tensile strength of the HMA mixtures. Experimental investigations were conducted to validate the developed theoretical relations. A reasonable agreement was found between the predicted tensile strength and the experimental results at low temperatures. Parameters affecting the tensile strength of asphalt mixtures were discussed based on the calculated results.     

混凝土多孔砖应用技术研究

在分析了多孔砖力学特点的基础上,通过分析和研究,找出克服由于设计、施工原因造成的混凝土多孔砖砌体强度下降的措施。     

混凝土框架节点有限元分析

以文献[4]中所做的碳纤维布加固节点的试验为依据,应用ANSYS程序对其中的试件2进行单调加载情况下的全过程数值模拟计算,最后通过数值计算结果与试验结果在承载能力、裂缝开展及破坏形态等方面的比较,来验证应用ANSYS程序模拟碳纤维布加固钢筋混凝土框架节点抗震性能试验的有效性和可行性。     

桥梁高性能混凝土应用

分析比较了混凝土与高性能混凝土的应用情况，介绍了桥梁使用高性能混凝土的必要性和重要性，通过评价高性能混凝土桥梁的寿命、经济性，提出了降低HPC桥梁建设成本的措施。     

砼受压损伤力学本构模型的研究

本文利用ＭＴＳ公司８１５．０２型电液伺服试验系统对砼进行了等应变速率加载控制的应力一应变全曲线试验，应用不可逆热力学和内变量理论的成果建立了砼损伤力学模型，并用概率统计的观点分析了损伤的演化规律。由于考虑了不可逆变形的影响，本文所建本构模型与实验吻合较好。     

龙潭拱坝砼上坝运输方案选择

龙潭拱坝坝高９０ｍ，砼上坝运输是砼施工过程中的中间环节，控制进度的关键，必须因时因地制宜地选择适当的运输机械和运输方案，使砼运输能做到保质、保量、及时和经济，通过论证比较，结合本工程现实情况，砼上坝运输不采用缆机而采用门机方案．