Electrical characterization of very-narrow-gap bulk HgCdTe single crystals by variable magnetic field hall measurements

Variable-magnetic-field Hall measurements (0 to 1.5 T) are performed on very-narrow-gap bulk-grown Hg_1−xCd_xTe single crystals (0.165 ≤ x ≤ 0.2) at various temperatures (10 to 300K). The electron densities and mobilities are obtained within the one-carrier (electrons) approximation of the reduced-con-ductivity-tensor scheme. The present data together with the selected data set reported by other workers exhibit a pronounced peak when the electron mobility is plotted against the alloy composition x-value which has been predicted to be due to the effective-mass minimum at the bandgap-crossing (E_g ≈ 0). The observed position (x ≈ 0.165), height (≈4 x 10² m²Vs), and width (≈0.01 in x) of the mobility-peak can be explained by a simple simulation involving only ionized-impurity scattering. A lower bound of the effective mass is introduced as a fitting parameter to be consistent with the finiteness of the observed electron mobility and is found to be of the order of 10⁻⁴ of the mass of a free electron.     

On the applied stress dependence of the subgrain size

The present work studies the collection of experimental data from which Raj and Pharr (Mater. Sci. Eng., 81 (1986) 217) deduced a universal empirical dependence of the subgrain size on the applied stress. In accord with their result and some theoretical predictions the normalized subgrain size d_s/b was ssumed to be proportional to G/σ (G is the shear modulus, b the Burgers vector length, σ the applied stress). The evaluated factor of proportionality K₁, having the value within the interval from 0.76 to 180 in the inspected data sets, was discussed from the point of view of various factors which can influence the experimental data.     

Smithsonian Microbeam Standards

This is a short history of the Smithsonian Microbeam Standards; their sources, selection, preparation, and analyses. Fifty-eight minerals, natural glasses, and synthetic samples have been characterized in the past 25 years. During that time, over 750 requests were received for approximately 11 000 individual samples. These reference samples are referred to as the Smithsonian Microbeam Standards.     

The influence of dependence of HEMT’s model parameters on gate and drain voltages on upper boundary of LNA’s linearity

On the basis of numerical model the parameters of high electron mobility transistors (HEMT’s) as a function of gate and drain voltages are obtained. The simulation of nonlinear properties of low noise amplifier cascade with HEMT for various modes of its operation has shown that the account of its dependence simultaneously on both the voltages allows to approach the results of calculation to experimental data.     

A simple modification to the LKB 7800 series Knifemaker and a balanced-break method to prepare glass knives for cryosectioning

A novel method of using the LKB 7800 series Knifemaker to produce glass knives using a balanced break is described. The method produces knives of sufficient quality to section aldehyde-fixed, sucrose-cryoprotected, frozen biological material in a cooled cryochamber of an ultramicrotome. The modifications to the Knifemaker are minimal and, if required, the machine can be returned easily to its normal state after use.     

The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

Image analysis results are reported on the generation of damage in particulate reinforced metal matrix composites during compressive deformation. The technique allows the automated collection of data on the incidence of particle fracture and void formation in the matrix as a function of important microstructural parameters such as local particle volume fraction and particle size. There is a strong relationship between damage and the local volume fraction of the reinforcement proving that damage formation is accentuated in regions of particle clustering. With the SiC reinforced materials examined, there was observed to be a change in dominance of damage mechanism from particle fracture at low local volume fractions to void formation in the matrix within strongly clustered regions. The results are compared with finite element (FE) modelling of the compressive deformation of clustered particles using a simple cluster of equi-spaced particles. The FE results suggest that plastic flow is generally inhibited in clustered regions. In certain highly clustered configurations shielding is such that flow does not occur in the heart of the cluster even at high levels of average plastic strain. The modelling suggests that the change in dominance of damage mechanism is related to the dramatic increase in tensile hydrostatic stresses in the matrix with higher levels of particle clustering.     

氧化还原功能纤维的研究 Ⅷ．含正丙胺基吸附剂与Au~（3＋）的氧化还原反应机理

通过元素分析、红外光谱分析、光电子能谱分析以及扫描电子显微镜分析等手段，证实含正丙胺基吸附剂与Ａｕ３＋的氧化还原反应过程中，氮原子邻近的羟基碳或Ｃ－Ｈ键被氧化，而氮原子并未参与氧化还原反应；吸附态Ａｕ（３＋）最终部分被还原成单质金；在非水介质中吸附在吸附剂上的金聚集成颗粒状。     

Minimizing sample evaporation in the environmental scanning electron microscope

The ElectroScan environmental scanning electron microscope (ESEM) enables wet samples to be observed by eliminating air but allowing water vapour into the sample chamber. However, evaporation from, and condensation on, the sample may occur during the pumpdown sequence used to reach this state, which means that the sample may not be in its natural state when viewed if due care is not taken. In this paper, the pumping system of the ESEM is described mathematically and expressions are derived for the evaporation and condensation. This treatment is then used to calculate the optimum pumpdown sequence. The importance of using the optimized procedure is illustrated by micrographs of fat emulsions.     

磷酸盐激光玻璃中铂颗粒密度与氧化还原平衡关系的研究

用吸收光谱法研究了Ｒ２Ｏ—ＢａＯ—Ｐ２Ｏ５系统磷酸盐激光玻璃中铂颗粒密度与铭的氧化还原平衡的关系。结果表明，玻璃中铂颗粒密度随平衡向右移动而减小；玻璃中平衡随熔炼气氛中氧分压增大、熔炼温度升高而向右移动，当足够大时，铂颗粒不能形成。     

Abrasion phenomena in twill tencel fabric

The abrasion characteristics of Tencel fabrics were evaluated by Martindale abrasion and laundering, and the breakdown mechanism of fibers was surveyed by scanning electron microscopy. The fabric was subjected to pad‐dry‐cure treatment with two different types of modified dimethyloldihydroxyethylene urea resins (Reaktant DH and Reaktant FC). Although the degree of dry abrasion varied with different resins, the damage exhibited by individual fibers differed little from untreated to resin‐treated; the major mechanism of abrasion was through friction, and the mechanism of fiber failure was multiple splitting and transverse cracking. In untreated Tencel, the characteristic feature of wet abrasion was massive fibrillation, and in crosslinked fabrics, the wet abrasion mechanism was through fiber slippage and slicing action, although in the Reaktant FC‐treated fabric, the wet abrasion mechanism was more through slicing than through fiber splitting. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1391–1398, 2006