Oil yield and compressibility modeling during microscale expression: Criteria for linseed breeding

Seven linseed varieties were harvested at seven times before complete maturity. Microscale oilseed expressions were subsequently carried out on it. A pressure of 10 MPa was applied for 1 h under uniaxial stress. The results were characterized in terms of oil, water and mucilage content, harvest date and oil yield. The piston displacement versus time (creep curves) was described by a four‐Kelvin‐Voigt elements viscoelastic model. Parameters were derived from the model, such as the mechanical properties of seeds (compressibility moduli), showing that the viscoelastic model fits well the experimental data (R² ≈ 0.999). The modeling parameters were combined with some biochemical data in order to predict the kinetics of oil extraction.     

Spectral color reproduction minimizing spectral and perceptual color differences

In this article, we are combining minimization criteria in the colorant separation process for spectral color reproduction. The colorant separation is performed by inverting a spectral printer model: the spectral Yule‐Nielsen modified Neugebauer model. The inversion of the spectral printer model is an optimization operation in which a criterion is minimized at each iteration. The approach we proposed minimizes a criterion defined by the weighted sum of a spectral difference and a perceptual color difference. The weights can be tuned with a parameter α ∞ [0, 1]. Our goal is to decrease the spectral difference between the original data and its reproduction and also to consider perceptual color difference under different illuminant conditions. In order to find the best α value, we initially compare a pure colorimetric criterion and a pure spectral criterion for the reproduction, then we combine them. We perform four colorant separations: the first separation will minimize the 1976 CIELAB color difference where four illuminants are tested, the second separation will minimize an equally weighted summation of 1976 CIELAB color difference with the four illuminants tested independently, the third colorant separation will minimize a spectral difference, and the fourth colorant separation will combine a weighted sum of a spectral difference and one of the two first colorimetric differences previously introduced. This last colorant separation can be tuned with a parameter in order to emphasize on spectral or colorimetric difference. We use a six colorants printer with artificial inks for our experiments. The prints are simulated by the spectral Yule‐Nielsen modified Neugebauer model. Two groups of data are used for our experiments. The first group describes the data printed by our printing system, which is represented by a regular grid in colorant space of the printer and the second group describes the data which is not originally produced by our printing system but mapped to the spectral printer gamut. The Esser test chart and the Macbeth Color Checker test chart have been selected for the second group. Spectral gamut mapping of this data is carried out before performing colorant separation. Our results show improvement for the colorant separations combining a sum of 1976 CIELAB color difference for a set of illuminants and for the colorant separation combining a sum of 1976 CIELAB color difference and spectral difference, especially in the case of spectral data originally produced by the printer. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 494–504, 2008     

Kinetic modelling of textural changes in ready-to-eat breakfast cereals during soaking in semi-skimmed milk

Summary Ready‐to‐eat breakfast cereals immersed in milk undergo undesirable changes in texture because of sudden moisture uptake. The textural changes are ascribable to a plasticizing effect of water, which modifies the mechanical strength of products by softening the starch/protein matrix. In this work, some textural parameters of different cereal flakes were derived from the force–displacement curves monitored during 300 s of immersion in milk. Hardness loss, deformability increment and changes in the force–displacement curve profile were calculated and plotted against soaking time. The application of a sugar coating process to a model cereal flake increased the initial product hardness and improved the preservation of the textural parameters during immersion. The Peleg model closely fitted the experimental data, with regression coefficients from 0.967 to 0.999.     

Assessing pre- and post-deformation in the southern Arava Valley segment of the Dead Sea Transform, Israel by differential interferometry

Differential radar interferometry, using archived ERS data over the region of the Dead Sea Transform, allows to detect ground movement (subsidence or uplift) in playas within the southern Arava Valley segment of the Dead Sea Rift. These measurements are consistent with a mean displacement rate of about 0.4 cm/month, in the direction of the radar beam, during the 8-month period preceding the Nuweiba earthquake of 22 November 1995. In the 3 years following the earthquake, the measured rate was smaller by a factor of 10. These movements are not related to salt diapirs or water pumping activities in the area. The exact location, along faults, suggests a possible correlation with pre-seismic and post-seismic fault deformation.A simple fault model consistent with the observed phenomena associates the observed subsidence/uplift to right and left stepping en-echelon fault patterns related to inter-seismic tensional accumulation along the faults. Further observations are necessary on this site and similar fault areas to corroborate the correlation between seismic activity and the observed phenomena. Monitoring of these sites should continue with differential Global positioning system (GPS) measurements and radar interferometric analysis using Envisat and Radarsat as well as archived data (including J-ERS).     

Parametric and nonparametric Bayesian model specification: A case study involving models for count data

In this paper we present the results of a simulation study to explore the ability of Bayesian parametric and nonparametric models to provide an adequate fit to count data of the type that would routinely be analyzed parametrically either through fixed-effects or random-effects Poisson models. The context of the study is a randomized controlled trial with two groups (treatment and control). Our nonparametric approach uses several modeling formulations based on Dirichlet process priors. We find that the nonparametric models are able to flexibly adapt to the data, to offer rich posterior inference, and to provide, in a variety of settings, more accurate predictive inference than parametric models.     

Linear mixture model applied to Amazonian vegetation classification

Many research projects require accurate delineation of different secondary succession (SS) stages over large regions/subregions of the Amazon basin. However, the complexity of vegetation stand structure, abundant vegetation species, and the smooth transition between different SS stages make vegetation classification difficult when using traditional approaches such as the maximum likelihood classifier (MLC). Most of the time, classification distinguishes only between forest/non-forest. It has been difficult to accurately distinguish stages of SS. In this paper, a linear mixture model (LMM) approach is applied to classify successional and mature forests using Thematic Mapper (TM) imagery in the Rondônia region of the Brazilian Amazon. Three endmembers (i.e., shade, soil, and green vegetation or GV) were identified based on the image itself and a constrained least-squares solution was used to unmix the image. This study indicates that the LMM approach is a promising method for distinguishing successional and mature forests in the Amazon basin using TM data. It improved vegetation classification accuracy over that of the MLC. Initial, intermediate, and advanced successional and mature forests were classified with overall accuracy of 78.2% using a threshold method on the ratio of shade to GV fractions, a 7.4% increase over the MLC. The GV and shade fractions are sensitive to the change of vegetation stand structures and better capture biophysical structure information.     

Cross-Border Migration of Hong Kong Residents Under the 'One Country, Two Systems' Policy

Hong Kong is known as a migrant city because its population was sourced from mainland China, and because there has always been outflows of people to overseas countries, especially from the mid-1980s to mid-1990s. Emigration to mainland China has become a significant recent trend. This article discusses this phenomenon in the theoretical contexts of migration and trans-border residential development. It contends that the trend will intensify more quickly than other cross-border movements because the two systems are separated by a political border within one country, and because there are common cultural ties and rapid economic integration.     

对象模型及其模型化方法——一种深知识的表示模型

本文介绍了对象模型和深知识等概念,在这些概念的基础上还讨论了基于框架知识表示形式的复杂系统的模型化方法.文中给出的模型化方法是通过 ISA 关系和 PART-OF 关系的相结合而形成的.这种模型化方法可用于基于深知识的设计型、分析型以及控制型等类型的专家系统.