Motion compensated film restoration

Motion picture films are susceptible to local degradations such as dust spots. Other deteriorations are global such as intensity and spatial jitter. It is obvious that motion needs to be compensated for before the detection/correction of such local and dynamic defects. Therefore, we propose a hierarchical motion estimation method ideally suited for high resolution film sequences. This recursive block-based motion estimator relies on an adaptive search strategy and Radon projections to improve processing speed. The localization of dust particles then becomes straightforward. Thus, it is achieved by simple inter-frame differences between the current image and motion compensated successive and preceding frames. However, the detection of spatial and intensity jitter requires a specific process taking advantage of the high temporal correlation in the image sequence. In this paper, we present our motion compensation-based algorithms for removing dust spots, spatial and intensity jitter in degraded motion pictures. Experimental results are presented showing the usefulness of our motion estimator for film restoration at reasonable computational costs. Received: 9 July 2000 / Accepted: 13 January 2002 Correspondence to:S. Boukir     

Laboratory simulated slipstream testing of novel sulfur removal processes for gasification application

The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is investigating an Early Entrance Coproduction Plant (EECP) concept to evaluate integrated electrical power generation and methanol production from coal and other carbonaceous feedstocks. Research, development and testing (RD&T) that is currently being conducted under the project is evaluating cost effective process systems for removing contaminants, particularly sulfur species, from the generated gas which contains mainly synthesis gas (syngas), CO₂ and steam at concentrations acceptable for the methanol synthesis catalyst. The RD&T includes laboratory testing followed by bench-scale and field testing at the SG Solutions Gasification Plant located in West Terre Haute, Indiana. Actual synthesis gas produced by the plant was utilized at system pressure and temperature for bench-scale field testing.     

Study on Reduction of Sulfur Content in FCC Gasoline

Reduction of sulfur content in FCC gasoline was studied in a fixed fluid bed (FFB) unit by using metal-modified LV-23 FCC catalyst. The results showed that the sulfur content in FCC gasoline could be reduced with LV-23 catalyst modified with zinc, palladium, zinc-palladium, zinc-cobalt, and zinc-nickel. Among these metals or metal combinations, palladium-containing catalyst was the most effective. Desulfufization of the heavy fraction of FCC gasoline was more effective than full-range gasoline under the same conditions with palladium-containing catalysts. A high reaction temperature was favorable to desulfurization, but it would reduce the yield of liquid product. After desulfurization reaction, the olefm content of product gasoline decreased while the aromatic and iso-alkane contents increased. Removal of thiophene and benzothiophene is higher.     

An integrated biodesulfurization process,including inoculum preparation,desulfurization and sulfate removal in a single step,for removing sulfur from oils

BACKGROUND: A single‐stage reactor, in which the growth of bacterial culture, induction of desulfurizing enzymes, and desulfurization reaction are carried out in a single step, was adopted to investigate desulfurization of dibenzothiophene (DBT) at high cell densities. Rhodococcus erythropolis, IGTS8 was used as the biocatalyst. Optimal conditions for bacterial growth and DBT desulfurization were investigated. RESULTS: Optimization of fermentation conditions was necessary to obtain high cell densities including controlling accumulation of acetate. Under optimal operating conditions, the maximum optical density at 600 nm (OD₆₀₀) was measured to be 26.6 at 118 h of cultivation. When biodesulfurization of DBT in model oil with a high cell density culture of IGTS8 was investigated, accumulation of sulfate was found to limit the extent of desulfurization. A sulfate removal step was added to obtain a single‐stage integrated biodesulfurization process. Sulfate removal was achieved via an aqueous bleed stream and use of a separation unit to recycle the organic phase. CONCLUSION: A proof of principle of a complete system capable of biocatalyst growth, induction, desulfurization and by‐product separation was demonstrated. This system enables simplification of the biodesulfurization process and has potential to lower the operating cost of the bioprocess. Copyright © 2008 Society of Chemical Industry     

钢坯修磨金属切除率数学模型的研究

从分析修磨过程运动学和单个磨粒切削入手,建立了磨削深度与磨削过程诸参数(如工艺、材料性能、砂轮性能等)的关系表达式,从而建立起金属切除率与各单项参数的定量关系,为改善或提高修磨效率和修磨过程控制提供了有意义的根据。理论分析与实验结果吻合良好。     

吸附法脱除乙烯中少量氧气的吸附剂研究

采用重量法在电子天平上研究了Ｃ２Ｈ４和Ｏ２单组份在５Ａ、１３Ｘ、丝光沸石和碳分子筛等不同吸附剂上的吸附平衡性质和扩散动力学性质。结果表明，在沸石类吸附剂上，Ｃ２Ｈ４的平衡吸附量远大于Ｏ２的平衡吸附量，Ｃ２Ｈ４的吸附扩散速率也大于Ｏ２的扩散速率；在碳分子筛吸附剂上Ｃ２Ｈ４的平衡吸附量大于Ｏ２的平衡吸附量，但Ｏ２的吸附扩散速率远大于Ｃ２Ｈ４的扩散速率，其扩散系数是Ｃ２Ｈ４的２３９倍。单柱评价结果表明，Ｃ２Ｈ４－Ｏ２混合组份通过该碳分子筛吸附剂时，Ｏ２的破点时间长，Ｃ２Ｈ４的纯度可达１００％。加压有利于选择吸附Ｏ２，而且加压吸附、常压脱附再生性能好。该碳分子筛是脱除高浓度乙烯中少量氧气的理想吸附剂。     

CAST的工作原理与设计计算

详细论述了循环式活性污泥法(CAST)的工作原理，对该工艺的设计计算作了探讨，提出了设计方法，并提供了有关计算公式和操作时间分配。     

数字水印攻击及对策分析

数字水印技术作为数字媒体版权保护的重要手段越来越引起人们的重视。文章讨论了数字水印的概念、特征,重点介绍了数字水印的鲁棒性及影响数字水印鲁棒性的因素,总结和分析了数字水印主要攻击方式并提出相应的应对措施。     

Prediction of venturi scrubber efficiency used in an updraft gasifier cleaning train

The performance of a venturi scrubber in the removal of tar from gas in updraft gasification has been studied. The gasifier has been operated with a husk feed rate of 1.6 × 10^?4 kg/s. The venturi scrubber has been operated at a superficial gas velocity of 56.4 m/s at the throat. A wide variety of scrubbing liquids having surface tensions ranging from 0.026 to 0.072 N/m have been used. The Q_g/Q_l, has been varied in the range of 1000–8000. The tar separation efficiency η has been found to vary from 51 to 98.5%. A mathematical model, assuming steady-state operation, has been developed considering very high pseudosolubility of tar in the scrubbing liquids. The predicted values of η have been compared with experimental results. The model satisfactorily explains the tar removal efficiency of the venturi for Q_g/Q_l values ranging from 4000 to 8000 for all scrubbing liquids. The following correlation has been developed for predicting venturi scrubber efficiency: .     

Environmental and climate justice and technological carbon removal

Environmental justice (EJ) and climate justice are becoming central foci of climate policy. Awareness is also growing on the need for some amount of carbon dioxide removal (CDR) to curb warming to 1.5 °C. In this paper we map dimensions of environmental and climate justice that stakeholders and communities will need to consider -- from local to global scales. Mapping issues is a step towards developing frameworks to undertake CDR in an environmentally just way.