Effect of display location on control-display stereotype strength for translational and rotational controls with linear displays

Experiments were designed to investigate the effects of control type and display location, relative to the operator, on the strength of control/display stereotypes. The Worringham and Beringer Visual Field principle and an extension of this principle for rotary controls (Hoffmann E.R., and Chan A.H.S. 2013). “The Worringham and Beringer ‘Visual Field’ Principle for Rotary Controls. Ergonomics.” 56 (10): 1620–1624) indicated that, for a number of different control types (rotary and lever) on different planes, there should be no significant effect of the display location relative to the seated operator. Past data were surveyed and stereotype strengths listed. Experiments filled gaps where data are not available. Six different control types and seven display locations were used, as in the Frame of Reference Transformation Tool (FORT) model of Wickens et al. (Wickens, C.D., Keller, J.W., and Small, R.L. (2010). “Left. No, Right! Development of the Frame of Reference Transformation Tool (FORT).” Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting September 2010, 54: 1022–1026). Control/display arrangements with high stereotype strengths were evaluated yielding data for designers of complex control/display arrangements where the control and display are in different planes and for where the operator is moving. It was found possible to predict display/control arrangements with high stereotype strength, based on past data.

Practitioner Summary: Controls and displays in complex arrangements need to have high compatibility. These experiments provide arrangements for six different controls (rotary and translational) and seven different display locations relative to the operator.     

Comparison of Skidding Performance of Small Track-type Experimental Prototype Skidder and J-50 Skidding Tractor

In this paper, field experimental comparison is made between a small track-type experimental prototype skidder and a J-50 skidding tractor. Experimental data, including skidding productivity, soil compaction on skidding trails, and damage rate of the residual trees, are analyzed. The results indicate that with the condition of scattered skidding area and low skidding volume per cycle, small track-type experimental prototype skidder has advantage on working and a higher skidding productivity. It makes lower soil compaction to the skidding trails in the depth of 0-5 cm, 5-10 cm, and 10-15 cm. Under the same work conditions, the damage rate of the residual trees made by small track-type experimental prototype skidder is only 1/5 of those made by J-50 type skidding tractor. The damage rate is reduced by 80%.     

Residual strength prediction of multiple cracked stiffened panels

Prediction of the coalescence of adjacent cracks is critical for residual strength estimation of structures under multiple site damage conditions. A methodology successfully developed for the case of crack link‐up prediction of un‐stiffened plates, is extended for the case of typical cracked stiffened aircraft panels. The proposed link‐up criterion is based on the change in the magnitudes of elastic and plastic strain energies of the stiffened panel, before and after the cracks coalesce. The strain energy magnitudes of interest are calculated using non‐linear elastic–plastic finite‐element analysis. For the application and verification of the method, experimental results from the open literature are used. Residual strength values calculated by the proposed methodology are in good agreement with the experimental results. The present criterion provides superior results when compared to the existing and commonly applied link‐up criteria.     

Strain rate sensitivity of tensile properties in high Nb containing TiAl alloys

The effect of strain rate on the yield strength of high Nb containing TiAl alloy was studied. The results show that the strain rate sensitivity varies with the test temperature, and the yield strength is not sensitive to the strain rate at room temperature but significantly sensitive to the strain rate at high temperature. An increase of the strain rate or a decrease of the temperature results in an obvious change of fracture mode. It is found that the strain rate sensitivity of this alloy varying with temperature is due to the dislocation climb generated at high temperature.     

Stresses in bent copper tubing: Application to fatigue and stress-corrosion cracking failure mechanisms

The residual and applied stresses in u-bent copper tubing are addressed in the context of both cyclic fatigue and stress-corrosion cracking. Failures as a result of fatigue and stress corrosion cracking in u-bent copper tubing have been observed to initiate at nonintuitive locations when only the applied stresses on the component are considered. This paper presents both qualitative classical and quantitative finite-element stress analysis results for the forming of u-bends. The resulting residual stress distributions are compared to fracture patterns generated by both fatigue and stress-corrosion cracking mechanisms.     

亚麻针织产品的酶整理工艺探讨

为改善亚麻针织物的舒适性能，探讨用生物酶整理工艺来提高其柔软性。选取酶剂浓度、pH值、温度和时间4个因素作为正交实验的因子，进行了四因素四水平的正交实验。通过对实验结果的分析，确定了合理的生物酶整理工艺条件。工艺参数分别为：酶整理温度为50℃，整理液pH值为5，酶剂浓度为2%，整理时间为60min,亚麻针织坯布经过这种优化的酶整理后柔软性改善效果十分显著。     

无碳化物贝氏体在曲轴上的应用与展望

介绍了无碳化物贝氏体钢的特点、合金化原理、获得方法和在曲轴上的应用前景。