偶联剂对地砖用PVC填充材料相态结构和力学性能的影响

研究了钛酸酯类偶联剂和硅烷类偶联剂对钙矿、硅酸盐填充的PVC填允材料力学性能、相态结构、密度、热失重率及吸水伸长率和耐热阻燃性能的影响。结果表明,偶联剂可改善填充PVC的抗冲性能,降低其拉伸强度,扫描电镜分析表明,填料越细,分散越均匀,越易被PVC树脂所包覆,力学性能越好,研究得到了比重大、热失重率低、吸水伸长率小、阻燃耐烧灼性好的高填充PVC硬质塑料地板砖。     

PMMA‐modified divinylester/styrene resins: Phase diagrams and morphologies

Binary and ternary experimental cloud‐point curves (CPCs) for systems formulated with a low molar mass synthesized divinylester (DVE) resin, styrene (St), and poly(methyl methacrylate) (PMMA) were determined. The CPCs results were analyzed with the Flory–Huggins (F‐H) thermodynamic model taking into account the polydispersity of the DVE and PMMA components, to calculate the different binary interaction parameters and their temperature dependences. The St‐DVE system is miscible in all the composition range and down to the crystallization temperature of the St; therefore, the interaction parameter expression reported for a higher molar mass DVE was adapted. The interaction parameters obtained were used to calculate the phase diagrams of the St‐PMMA and the DVE‐PMMA binary systems and that of the St‐DVE‐PMMA ternary system at three different temperatures. Quasiternary phase diagrams show liquid–liquid partial miscibility of the St‐PMMA and DVE‐PMMA pairs. At room temperature, the St‐DVE‐PMMA system is miscible at all compositions. Final morphologies of PMMA‐modified cured St‐DVE materials were generated by polymerization‐induced phase separation (PIPS) mechanism from initial homogeneous mixtures. SEM and TEM micrographs were obtained to analyze the generated final morphologies, which showed a direct correlation with the initial miscibility of the system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4539–4549, 2006     

D301树脂分离衣康酸的工艺研究

采用弱碱性阴离子交换树脂Ｄ３０１对发酵法生产的衣康酸进行了分离研究。通过静态交换实验，研究了Ｄ３０１树脂对衣康酸的静态交换动力学，确定了传质机制和影响因素；通过动态交换实验，研究了以硫酸为洗脱剂，以氨水为再生剂的工艺过程，确定了主要工艺参数。     

家电卷材涂料用HDI改性聚酯树脂的研制

以己二异氰酸酯（HDI）改性聚酯树脂与氨基树脂配制成家电用卷材涂料。阐述了氨酯键对涂膜性能的贡献。探讨了HDI用量对涂膜性能的影响。     

石蜡聚苯乙烯微球的制备

通过悬浮聚合技术合成了石蜡聚苯乙烯微球，研究了合成过程中引发剂浓度及交联剂用量对微球粒径及其分布的影响。     

动态硫化技术及其发展

结合动态硫化技术的发展史,重点评述了国外80年代该技术的发展及其特点,揭示了TPV性能及特征与制备条件的关系;简介我国开发研究TPV的概况,并提出了看法。     

环氧树脂-聚丙烯酸酯乳液型复合薄膜粘合剂

本文主要叙述了环氧-丙烯酸酯聚合乳液的合成,以及该乳液粘合剂的配制;讨论了该乳液粘合剂的粘合性能及耐水、耐溶剂性能。     

钢筋阻锈剂在工业厂房中的应用

介绍了钢筋阻锈剂的基本性能、使用范围和方法。     

基于CaO引导的甲烷蒸汽重整化学链燃烧制氢系统

为在重整气中得到高纯H_2和降低尾气CO_2分离成本,建立了基于CaO引导的甲烷蒸汽重整化学链燃烧制氢系统,该系统在重整反应器中加入CaO吸收剂,用以吸收重整器内的CO_2,提高重整气中H_2浓度,形成的CaCO_3固体在煅烧器中受热分解重新生成CaO。利用Aspen Plus进行了过程模拟及热力学分析,并研究主要参数对系统性能的影响,得到优化的操作条件为:CaO循环量/CH_4比为0.5,CH_4(燃料)/CH_4比为0.35,NiO循环量/CH_4比为1.4。CaO循环量/CH_4比从0变化到0.5时,重整气中H_2浓度从0.60增长到0.99;CH_4(燃料)/CH_4比在0.25~0.45区间变化时,重整气中H_2浓度从0.86提高到0.99,产气量增加;NiO循环量/CH_4比在1~1.6区间变化时,重整气中H_2浓度从0.88增长到0.99,系统有效能效率变化较小。