波在PTL介质中传播的旅行时反演

本文对Byun(1990)的横向各向同性介质的旅行时反演方法作了两点改进:其一是根据优化后的V_r值计算一个初始的F值,然后再根据这个初始值进行最小均方误差分析;其二是对初始值进行优化分析时,提出用测量值(或由式(4)和式(10)计算的理论值)作为实际值进行拟合,而Byun的方法是用式(11)的计算来得到一个实际值。理论模型证明:本文所述方法有一个比较宽的适应性,而Byun方法只在弱各向异性时才可以得到较精确的结果。     

Application of Wavelet Packet De-noising in Time-Frequency Analysis of the Local Wave Method

The local wave method is a very good time-frequency method for nonstationary vibration signal analysis. But the interfering noise has a big influence on the accuracy of time-frequency analysis. The wavelet packet de-noising method can eliminate the interference of noise and improve the signal-noise-ratio. This paper uses the local wave method to decompose the de-noising signal and perform a time-frequency analysis. We can get better characteristics. Finally, an example of waveletpacket denoising and a local wave time-frequency spectrum application of diesel engine surface vibration signal is put forward.     

Pure perceptual-based sequence learning.

Learning a sequence of target locations when the sequence is uncorrelated with a sequence of responses and target location is not the response dimension (pure perceptual-based sequence learning) was examined. Using probabilistic sequences of target locations, the author shows that such learning can be implicit, is unaffected by distance between target locations, and is mostly limited to first-order transition probabilities. Moreover, the mechanism underlying learning affords processing of information at anticipated target locations and appears to be attention based. Implications for hypotheses of implicit sequence learning are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

自干扰抵消盲空时DS-CDMA信号检测技术

针对传统单用户检测器存在远近效应和性能下界问题,近年来提出的一系列最大SINR准则盲空时RAKE接收机,可以较好地合并期望用户的多径分量,同时抑制多址干扰用户能量.本文对这类接收机进行了进一步的研究,提出了一种自干扰抵消方法,更有效地克服了单用户检测器存在的性能下界以及远近效应问题.仿真结果验证了本文方法的有效性.     

On using peak amplitude and rise time for AE source characterization

Acoustic Emission (AE) signals, which are electrical version of acoustic emissions, are usually analysed using a set of signal parameters. The major objective of signal analysis is to study the characteristics of the sources of emissions. Peak amplitude(P _a ) and rise time(R _t ) are two such parameters used for source characterization. In this paper, we theoretically investigate the efficiency ofP _a andR _t to classify and characterize AE sources by modelling the input stress pulse and transducer. Analytical expressions obtained forP _a andR _t clearly indicate their use and efficiency for source characterization. It is believed that these results may be of use to investigators in areas like control systems and signal processing also     

某实时控制系统在QNX上的具体实现

简述了QNX实时操作系统的特点，详细介绍了一实时控制系统在QNX4．25上的具体实现。     

利用电阻场板提高SOI-LIGBT的性能

通过在SOI-LIGBT中引入电阻场板和一个p-MOSFET结构,IGBT的性能得以大幅提高.p-MOSFET的栅信号由电阻场板分压得到.在IGBT关断过程中,p-MOSFET将被开启,作为阳极短路结构起作用,从而使漂移区的过剩载流子迅速消失,IGBT快速关断.而且由于电场受到电阻场板的影响,使得过剩载流子能沿着一个更宽的通道流过漂移区,几乎消去了普通SOI-LIGBT由于衬偏造成的关断的第二阶段.这两个因素使得新结构的关断时间大大减少.在IGBT的开启状态,由于p-MOSFET不导通,因此器件的开启特性几乎与普通器件一致.模拟结果表明,新结构至少能增加25%的耐压,减少65%的关断时间.     

耐高温绝缘GFRP管的真空辅助树脂传递成型工艺研究

阐述了耐高温绝缘GFRP管的成型工艺及原材料选择，并对影响成型工艺的主要因素作了理论分析及试验验证。研究表明，以TDE－85／DDS体系为为基体，以无碱无捻玻璃纤维方格布为增强材料，用VARTM工艺成型的石油勘探高性能平衡管完全满足技术要求。     

单光子时间分辨在线谱仪系统中的接口电路

本文介绍单光子时间分辨在线谱仪系统中的多道分析器与IBM PC/XT微型计算机接口的工作原理及控制程序。