小空间 大设计——家居装饰设计初探

本文从家居装饰设计的特点入手,阐述了家居装饰设计应当关注的要素,提出了各个功能空间装饰的具体特征和要求。     

Associations between cow hygiene, hock injuries, and free stall usage on US dairy farms

This cross-sectional study evaluated cow comfort measures in free stall dairies across the United States as part of the National Animal Health Monitoring System's Dairy 2007 study. The study was conducted in 17 states and evaluations were completed between March 5 and September 5, 2007. Assessors recorded hygiene and hock scores, number of cows housed in the pen, the number of cows standing with only the front feet in a stall, standing fully in a stall, and lying in a stall. Facility design measures included bedding type, bedding quantity, stall length and width, presence of a neck rail or brisket locator, and relevant distances from the rear and bed of the stall. Of the 491 operations that completed the cow comfort assessment, 297 had Holstein cows housed in free stalls and were included in this analysis. Negative binomial models were constructed to evaluate the following outcomes: the number of cows that were very dirty, had severe hock injuries, stood with front feet in the stall, stood with all feet in the stall, and were lying in the stall. Hygiene was better on farms that did not tail dock cows compared with those that did (5.7 vs. 8.8% were dirty) and on farms located in the study's west region compared with those located in the east region (5.2 vs. 9.7% were dirty). Severe hock injuries were less common on farms in the west than those in the east (0.5 vs. 4.1%). In addition, severe hock injuries were less common on farms that used dirt as a stall base or sand as bedding compared with farms that did not. A higher percentage of cows was standing with front feet in the stall at higher ambient temperatures (incidence rate ratio = 1.016) and as time since feeding increased (incidence rate ratio = 1.030). A lower percentage of cows were standing with front feet in the stall when the stalls were shorter and when there were fewer cows per stall. Standing fully in a stall was performed by a higher percentage of cows during the summer than during the spring (13.6 vs. 8.1%), when cows were provided free stalls with rubber mats or mattresses, and as the distance from the rear curb to neck rail increased. A higher percentage of cows were lying in a stall when sand bedding was used, when bedding was added more frequently, and during the spring months. Results of this national survey indicate that tail docking provides no benefit to cow hygiene and that stall base and bedding are key factors influencing hock injuries and stall usage on US free stall dairy farms.     

General model to build awnings and external walls with optimum shading interaction

A general model is proposed to optimize the shading interaction between an awning and an external wall that project shadows on the facade of a construction. The original method was presented by the authors in Renewable Energy 28 (2003): 111, for a particular shading proposal. They emphasize the advantage of a one-dimensional approach to solve the problem of this interaction, analyzing the shadows projected by these elements from a side view. The generalized method, presented in this paper, is useful for architects to design shelter projects with more alternatives in the use of such shading devices. The general model also permits study and evaluation of any strategy chosen by the builder to shadow a facade, with an emphasis on windowpane shading, through graphical outputs of the solar performance.     

Passive cooling of outdoor urban spaces. The role of materials

This paper presents the results of a comparative study aiming to investigate the suitability of materials used in outdoor urban spaces in order to contribute to lower ambient temperatures and fight heat island effect. The study involved in total 93 commonly used pavement materials outdoors and was performed during the whole summer period of 2001. The thermal performance of the materials was measured in detail using mainly infrared thermography procedures.The collected data have been extensively analysed using statistical techniques. Comparative studies have been performed in order to identify the major advantages and disadvantages of the materials studied. Materials have been classified according to their thermal performance and physical properties into ‘cool' and ‘warm' materials. The impact of color, surface roughness and sizing has been analysed as well.The study can contribute to selection of more appropriate materials for outdoor urban applications, and thus assist to fight the heat island effect, decrease the electricity consumption of buildings and improve outdoor thermal comfort conditions.     

城市水环境建设中若干问题的探讨

结合上海和国内外一些大城市的实际情况，就水环境内涵的拓展，水环境在提高城市环境舒适性方面的作用和地位，以及如何恢复和创造城市水环境的自然形态等问题进行了有益的探讨，并提出了若干建议。     

Energy and comfort: A new type for TRNSYS

Two subroutines have been developed which permit users of the TRNSYS programme to calculate the parameters of ambiental comfort (PMV and PPD).The first subroutine deals with the calculation of the view factors inside a room for all the values of the spatial coordinates and, thus, permits the average radiant temperature to be calculated in every position. The second subroutine has been developed in accordance with the indications of the ISO 7730 standard.Both subroutines have been validated and then interfaced to TRNSYS.The integrated programme has been utilised to compare the performances of different heating systems in terms of energy consumption and comfort, maintaining the temperature of the interior constant for different climatic conditions.     

Energy efficient office buildings with passive cooling – Results and experiences from a research and demonstration programme

To gain access to information on energy use in office buildings, the German Federal Ministry for Economy launched an intensive research and demonstration programme in 1995. In advance of the 2002 EU energy performance directive a limited primary energy coefficient of about 100 kW h m⁻² a⁻¹ as a goal for the complete building services technology was postulated (HVAC + lighting) for all demonstration buildings to be supported. A further condition was that active cooling be avoided. Techniques such as natural or mechanical night ventilation or heat removal by slab cooling with vertical ground pipes as well as earth-to-air heat exchangers in the ventilation system were applied. An accompanying research was established to keep track of the results and the lessons learned from about 22 demonstration buildings realized and monitored until the end of 2005. As one outcome this paper summarises the energy performance of a selection of characteristic buildings together with an overview on the summer thermal comfort situations achieved. The research program will proceed during the next five years. Detailed reports and future results may be downloaded from the internet: www.enbau-monitor.de.     

Fault Ride-Through Capability Enhancement of VSC HVDC connected Offshore Wind Power Plants

To achieve active control of the AC voltage magnitude of wind power plant(WPP) collector network and improve the fault ride-through (FRT) capability,an FRT scheme based on feed forward DC voltage contr...     

Energy efficient room air distribution

An environmental chamber has been used to compare the effectiveness of mixing and displacement ventilation in terms of heat and contaminant removal. Results are presented for CFD simulations of the air movement in the chamber and for measurements using a heated mannequin with displacement ventilation. The CFD simulations and the measurements suggest that displacement ventilation is more energy efficient than a mixing system.     

Comfort criteria for passively cooled buildings a pascool task

The application of passive cooling techniques to buildings in warm climates creates the need for appropriate comfort criteria. Conventional comfort criteria, usually based upon laboratory experiments, seem to be unnecessarily severe. The paper describes preliminary findings of the PASCOOL Thermal Comfort task which, responding to renewed interest in behavioural aspets of thermal comfort, sets out to establish appropriate limits by field studies and theoretical considerations.