冷轧带钢板形测控技术的发展状况和关键问题

 冷轧带钢属于高端精品钢材,板形在线检测与控制是冷轧带钢的高端核心关键技术。自主创新研制板形测控系统是实现中国钢铁工业发展升级、建设钢铁强国的重大需求。目前,板形测控技术市场国外占据优势,国产系统正在代替进口,扩大应用规模,推进技术完善。研制先进的板形测控系统需要解决的关键技术有高精度高质量的板形仪、功能完备强大的控制手段和方法、高精度高速度的数学模型。板形仪主要有接触式和非接触式两大类,接触式板形仪通过测量带钢张力的横向分布反映板形,非接触式板形仪通过测量带钢浪形反映板形。接触式板形仪可靠耐用精度高,应用广泛,发展趋势为整辊式板形检测辊、无线式信号传输装置、板形数据的精确处理。板形控制数学模型的主要类型,按建模的原理和方法可分为机理模型和智能模型;按模型的性质和作用可分为分析模型和控制模型;按板形的表示方法可分为多点控制模型和分量控制模型。板形控制模型的发展趋势为机理与智能协同建模、动态模拟预报和动态解耦控制、多种手段和方法的协同优化。进一步提高板形测控技术水平需要突破3项关键问题,即整辊式板形仪通道耦合与解耦的机理模型、板形控制的动态模拟和动态解耦模型、板形控制的高精度智能建模方法。     

控轧控冷工艺对高强度锚杆钢组织和性能的影响

随着矿井深度的增加,对锚杆支护强韧性的要求越来越高,为了应对这一情况,需要研发出更高强度的锚杆钢。利用锚杆钢研究了轧制工艺、冷却工艺与珠光体、铁素体相比例,析出相析出行为及力学性能的关系。研究结果表明,在中轧后、精轧前采用适当水冷+回复段处理的复合工艺可使晶粒更细小、组织更均匀。对超高强度锚杆钢进行热压缩变形试验,由热模拟试验结果确定相转变温度为A_c1=737 ℃、A_c3=886 ℃。最终筛选出入精轧温度为810 ℃、回复段温度为800 ℃时,可获得的晶粒尺寸达4 μm,珠光体体积分数为66.8%,铁素体体积分数为33.2%,珠光体片层间距达200 nm;另外调整V、Cr、N等析出以提高锚杆钢的强韧性,较低的回复温度有利于细小、弥散、V(C/N)析出相的析出,V(C/N)的析出可进一步改善锚杆钢的力学性能。由该控轧控冷工艺轧制的锚杆钢屈服强度为780 MPa、抗拉强度为930 MPa、硬度为291HV、伸长率为20%。     

基于粗轧镰刀弯的精轧跑偏预控模型及应用

带钢热轧跑偏问题是影响带钢生产与板形质量的重要因素。轧制生产过程中,由于粗轧中间坯头部弯曲导致的精轧堆钢事故频发,不仅严重危害生产稳定性,还造成资源的严重浪费和企业的经济损失。为了解决上述问题,针对粗轧非对称板形影响因素,结合实测粗轧中间坯以及工艺过程数据,建立中间坯头部预控模型,并利用加权最小二乘法与模型自学习对模型增益系数进行优化,最终建立了基于粗轧镰刀弯的精轧跑偏预控模型。将模型计算值应用于现场生产后,有效降低了精轧带钢头部跑偏,具有较好的参考价值和指导意义。     

MICROSTRUCTURES AND TEXTURES IN COLD-ROLLED ALUMINIUM STRIP

ＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＡＮＤＴＥＸＴＵＲＥＳＩＮＣＯＬＤＲＯＬＬＥＤＡＬＵＭＩＮＩＵＭＳＴＲＩＰ①ＮｉｅＺｕｏｒｅｎ，ＺｈａｎｇＸｉｎｍｉｎｇ，ＹｉｎＺｈｉｍｉｎＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｒｉ...     

Modelling of plastic flow, heat transfer and microstructural evolution during rolling of eutectoid steel rods

A study was undertaken in an attempt to quantitatively describe the rolling process of eutectoid steel rods. Finite element method was employed to model plastic flow and heat transfer in the deformed material, and heat transfer during cooling to ambient temperature. The numerical calculation gave an assessment of the strain, strain rate and temperature distributions in the work piece. This allowed the prediction of the austenite microstructure evolution during the process. Finally, the relationships describing the microstructure-mechanical properties were used to quantitatively characterize the influence of processing parameters on strength of rods after rolling.     

Roll force,torque, lever arm coefficient,and strain distribution in edge rolling

Due to the growing importance of width control in strip and plate mills, edge rolling is currently an im-portant process in hot rolling mills. Research in edge rolling has been carried out, and in the present ar-ticle, models for roll force, torque, and lever arm coefficient are derived using the upper bound method. A simple, kinematically admissible deformation zone and velocity field, independent of friction in the roll gap, is proposed, and the energy dissipation rate is derived. The formula for energy dissipation rate has, in practice, no limitation because all edge rolling geometries are safely in the area where the formula is valid. Roll force and torque are derived by means of two independent integrals. Thus, the lever arm coef-ficient is evaluated from the expressions for roll force and torque using conventional rolling theory. Roll-ing trials report good agreement with theory. Measured roll forces are similar to calculated forces. Furthermore, the shape of the dogbone that arises during edge rolling is in fairly good agreement with the calculated dogbone shape. Deviations are due to the deviation from ideally plastic material in the ex-periments. Also, the strain distribution over the dogbone is similar to the proposed deformation zone. Thus, a new formula has been developed to a stage that it can be implemented in width control systems for edge rolling stands in hot strip and plate mills.     

楔横轧轧齐基本理论研究

分析了台介成形过程中模具及金属变形的特点。发现产生螺旋状台阶的原因及其存在区间。从理论上阐明了设计楔横轧模具过渡段应遵循的准则。对比分析了多种满足过渡段设计准则的方案，指出最佳过渡方案为截止轧齐法，并给出了求解轧齐曲线方程的三种体积平衡原理及相应公式。最后应用微体积平衡原理求解了斜台阶轧齐曲线方程。     

重钢高线轧机生产工艺设计

在原有国产高线轧机基础上,经改进,如采用新型闭口式轧机,超高速机架,顶交无扭精轧机组等。为重钢高线车间进行了设计,终轧保证速度达到８０ｍ／ｓ,使我国高线轧机国产化达到了新阶段。     

镁合金材料的应用及其加工技术的发展(1)

第一部分较全面地介绍镁及镁合金材料在交通运输、航空航天、电子工业、核能工业、化工、冶金等部门的应用方向与实例。第二部分简要地论述镁合金材料的加工技术，重点介绍镁合金新材料的研发、熔炼铸造工艺、压铸成型工艺、挤压技术、锻压技术与轧制技术的进展。指出镁合金是一种很有发展前景的新型金属材料，其加工技术将获得进一步的快速发展。     

PHYSICAL SIMULATION OF INTERFACIAL CONDITIONS IN HOT FORMING OF STEELS

1.~nonNUInericalmodellingbythefiniteelement(FE)methodhasbecomeaneffectiveandeconomyicmeansforsimulatingmetalfoeingprocesses.However,accuratemodellingdemandsthecorrectdefinitionandinputsofthedataforthethermalandphysicalpIDPertiesoftheworkpieceandtoolmaterials,theboUndaryconditionsattheworkpiece--toolinterfaceandinotherareas,inadditiontoappropriatemeshgenerationandnumericalsolutions.Althoughmostofthematerialdataareavailable,thedataforinterfacialheattransferandfrictionconditions,Whichhavesubst…