A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers

In this study, a damage identification approach was developed for carbon fibre/epoxy composite laminates with localized internal delamination. Propagation of the Lamb wave in laminates and its interaction with the delamination were examined. The fundamental symmetric Lamb wave mode, S₀, and the lowest order shear wave mode, S₀^′, were chosen to predict damage location. A real-time active diagnosis system was therefore established. This technique uses distributed piezoelectric transducers to generate and monitor the ultrasonic Lamb wave with narrowband frequency. The two-way switches were employed to minimize the number of transducers. A signal-processing scheme based on the time–frequency spectrographic analysis was utilised to extract useful diagnostic information. Also, an optimal identification method was applied on damage searching procedure to reduce errors and obtain the diagnostic results promptly. Experiments were conducted on [0/−45/45/90]_s CF/EP laminates to verify this diagnosis system. The results obtained show that satisfactory detection accuracy could be achieved.     

某微型起爆器引起的一起误爆事故分析

该文分析某微型起爆器引起的一起误爆事故，指出该起爆器设计上的缺陷及其对作业安全的威胁，提出防患建议。     

Vibration Monitoring and Diagnosis of Pipe-line Pumps on Offshore Platforms

ＶｉｂｒａｔｉｏｎＭｏｎｉｔｏｒｉｎｇａｎｄＤｉａｇｎｏｓｉｓｏｆＰｉｐｅｌｉｎｅＰｕｍｐｓｏｎＯｆｓｈｏｒｅＰｌａｔｆｏｒｍｓＺｈｅｎｇＷｅｎＴｅｃｈｎｏｌｏｇｉｃａｌＦａｃｕｌｔｙｏｆＭａｉｎｔｅｎａｎｃｅＥｎｇｉｎｅｒｉｎｇＧｕａｎｇｚｈｏｕ...     

煤矿许用毫秒延期电雷管研究

文中对影响煤矿许用毫秒延期电雷管沼气安全性与延期时间精度的因素进行了研究。应用正交设计研制了新的延期药配方，确定了合理的雷管结构及装配工艺参数，产品性能达到ＧＢ８０３１《工业电雷管》的规定。     

Diagnostics and monitoring of complex production processes using measurement of vibration-acoustic signals

A vibration-acoustic method for diagnostics and monitoring of production processes such as cutting metals makes it possible compared with other methods to reduce the requirement for measuring equipment and it provides a computer representation of the results observed. The set of equipment suggested has low cost and it exhibits considerable flexibility compared with existing equipment. __________ Translated from Izmeritel’naya Tekhnika, No. 7, pp. 30–34, July, 2006.     

Simulation of the VVER-1000 pump start-up experiment of the OECD V1000CT benchmark with CATHARE and TRAC-PF1

In the framework of joint effort between the Nuclear Energy Agency (NEA) of OECD, the United States Department of Energy (US DOE), and the Commissariat a l'Energie Atomique (CEA), France a coupled three-dimensional (3D) thermal-hydraulics/neutron kinetics benchmark for VVER-1000 was defined. The benchmark consists of calculation of a pump start-up experiment labelled V1000CT-1 (Phase 1), as well as a vessel mixing experiment and main steam line break (MSLB) transient labelled V1000CT-2 (Phase 2), respectively. The reference nuclear plant is Kozloduy-6 in Bulgaria. The overall objective is to assess computer codes used in the analysis of VVER-1000 reactivity transients. A specific objective is to assess the vessel mixing models used in system codes. Plant data are available for code validation consisting of one experiment of pump start-up (V1000CT-1) and one experiment of steam generator isolation (V1000CT-2). The validated codes can be used to calculate asymmetric MSLB transients involving similar mixing patterns. This paper summarizes a comparison of CATHARE and TRAC-PF1 system code results for V1000CT-1, Exercise 1, which is a full plant point kinetics simulation of a reactor coolant system (RCS) pump start-up experiment. The reference plant data include integral and sector average parameters. The comparison is made from the point of view of vessel mixing and full system simulation. CATHARE used a six-sector multiple 1D vessel thermal-hydraulic model with cross flows and TRAC used a six-sector, 18-channel coarse-mesh 3D vessel model. Good agreement in terms of integral parameters and inter-loop mixing is observed.     

浅谈小型水库安全管理现状及对策

济南市长清区小型水库运行管理中发现了一些值得探讨的问题.本文主要介绍了济南市长清区小型水库安全运行管理存在的主要问题,分析了问题产生的原因,提出了相应的处理对策,以供参考.     

Application of condition-based HRA method for a manual actuation of the safety features in a nuclear power Plant

A practical approach to develop a more realistic fault-tree model with a consideration of various conditions endured by a human operator is proposed. In safety-critical systems, the generation failure of an actuation signal is caused by the concurrent failures of the automated systems and an operator action. These two sources of safety signals are complicatedly correlated. The failures of sensors or automated systems will cause a lack of necessary information for a human operator and result in error-forcing contexts such as the loss of corresponding alarms and indications. It is well known that the error-forcing contexts largely affect the operator's performance. An automated system which consists of multiple processing channels and complex components is also affected by the availability of the sensors. This paper proposes a condition-based human reliability assessment (CBHRA) method in order to address these complicated conditions in a practical way. We apply the CBHRA method to the manual actuation of the safety features such as a reactor trip and auxiliary feedwater actuation in Korean Standard Nuclear Power Plants. Even the human error probability of each given condition is simply assumed, the application results prove that the CBHRA effectively accommodates the complicated error-forcing contexts into the fault trees.     

Self-Organized Monitoring in Ad-Hoc Networks

We propose in this paper a self-organized monitoring architecture for mobile ad-hoc networks based on a selective scheme where subsets of nodes are managed. These nodes are determined based on their network behavior in order to favor subsets of well-connected nodes. The key idea is to relax the requirements of the management plane, and to use these manageable subsets to monitor the performance of the overall network. We therefore propose a new performance metric to be monitored, in order to estimate the capability of ad-hoc nodes to communicate end-to-end in the network. Extensive simulations show how different parameters affect this metric.     

区域内旱情监测站点的布设研究

本文对北京通州辖区范围内组织的大规模的土壤墒情调查数据进行总结。基于地理统计、空间分析以及统计学知识，分析了北京通州旱情分布形势。运用数值分类学的知识对测量数据进行了聚类分析，同时用DB(DaviesBouldin)指标准则研究了区域内合理布设旱情监测站的数量及位置，为建立旱情监测站点提供了理论依据。