Design development of a static sunshade using small scale modeling technique

The rising global demand for energy has triggered emphasis on conservation of energy. Buildings are one of the important energy consuming sectors. Passive solar architecture encompasses a wide range of strategies and options resulting in energy efficient building design and increased occupant's comfort. Passive solar design, aiming at increasing direct solar gains during winter period and to avoid overheating during summer period should make use of specific shading devices over energy efficient window. The static sunshades are most effective for solar control inside the buildings.Countries like India have composite climate, which can be classified under summer, winter and rainy season. Depending on the seasonal requirements, this paper introduces a new geometry of a static sunshade, designed by calculating the sun angles for the two dates. The static sun shading design methodology is validated with the help of small scale modeling experimentation technique, carried out in Pilani, Rajasthan (India). Although insulating materials can be used as a part of a building structure, its feasibility should be checked before particular application. In the present paper, the two small-scale experimental models of actual construction material with varying static sunshades, i.e. horizontal and the proposed one have been constructed and analyzed with the models of insulating material (Polyurethane Foam [PUF]). Depending upon the solar intersection over south facade wall, sunlit area and shaded area have been correlated with temperature inside the models to decide the effectiveness of the proposed sunshade.     

CX6112车铣复合机床设计方案的研究与探讨

文章较系统地论述了车铣复合机床设计方案的形成过程，同时分析了该设计方案的持点，并简要介绍了该产品的主要技术参数和用途，简评了该产品的技术水平。     

WDB620高强钢应用于大型蜗壳的焊接制造工艺研究

2005年初,水电十四局承担了漫湾二期水电站和小湾水电站蜗壳的制造任务。蜗壳钢材选用国产600 MPa级别高强钢,为了全面综合地考核该级别钢种的材料强度和安全裕度,检验模拟大型蜗壳焊接制造工艺的可靠性。对国产的WDB620高强钢进行了可焊性和制造工艺性试验研究,并在国内首次设计、制造模拟压力容器并对其进行水压试验和爆破试验。研究成果通过中国水电集团公司鉴定,结论为该课题研究成果达到国内选进水平。     

Studies of substrate specificities of lipases from different sources

Although lipases are widely applied in a wide variety of reactions, available information on the factors that are responsible for the substrate specificities of lipases from different sources is scarce. In this paper, nine lipase‐producing microorganism strains were isolated from oil‐containing samples. The properties of these enzymes, including pH optima, temperature optima, thermal stability, and pH stability, vary significantly with the different sources from which these lipases were isolated. The substrate specificities of the nine lipases, including fatty acid and positional specificities, were also studied. The fatty acid specificities of the nine lipases were observably different toward 15 substrates with different carbon chain lengths, different saturation degrees and different side chains. The lipases from S₃ Penicillium citrinum (PCL), MJ₁ Aspergillus niger (ANL), MJ₂ Aspergillus oryzae (AOL), YM Bacillus coughing (BCL), S₉ Geotrichum candidum (GCL), and S₁₁ Candida lypolytica (CLL) showed the strongest specificities to short‐chain esters, and the other lipases showed strong selectivity for medium‐ or long‐chain and branched esters. The positional specificities were examined by analyzing the hydrolytic products of triolein catalyzed by the nine lipases, using TLC. The lipases can be mainly classified into two groups by their specificities for the ester bond at position 2 of triglycerides; one group can selectively hydrolyze the ester bond at position 2 of the triglycerides, the other group cannot. All these nine lipases were divided into four groups by hierarchical clustering analysis on the basis of the results of fatty acid and positional specificities.     

Direct synthesis and catalytic performance of ultralarge pore GaSBA-15 mesoporous molecular sieves with high gallium content

Mesoporous GaSBA-15 molecular sieves with different n_Si/n_Ga ratios have been directly synthesized using Pluronic 123 triblock polymer as a structure-directing agent by pH-adjusting method. The mesoporous materials have been characterized using ICP-AES, XRD, N₂ adsorption, ⁷¹Ga-MAS NMR, SEM and TEM. ICP-AES studies show a high amount of gallium incorporation on the silica pore walls. The structural and textural properties of calcined GaSBA-15 are characterized by XRD and N₂ adsorption. ⁷¹Ga MAS NMR results demonstrate that a high amount of tetrahedral-gallium could be substituted for Si in the framework of SBA-15. TEM and FE-SEM images show the uniform pore diameter and rope-like hexagonal mesoporous structure of GaSBA-15. These GaSBA-15 materials have been used as catalysts for vapour-phase t-butylation of 1,2-dihydroxybenzene (DHB) for selective synthesis of 4-t-butylcatechol (4-TBC) under different reaction conditions. GaSBA-15(10) gave the highest 93.2% conversion of DHB and 95.7% selectivity of 4-TBC as compared with other GaSBA-15 catalysts.     

Characterization of supported Pd-Pt catalysts by chemical probes

The temperature programmed (palladium) hydride decomposition appeared very effective method for diagnosing the extent of alloying in Pd-Pt/SiO₂ catalysts. Introduction of Pt to Pd catalysts moves the TPHD peak gradually towards lower temperatures and the shift in hydride decomposition peak is accompanied by a decrease in the amount of released hydrogen. The catalysts prepared the direct redox method showed much better alloy homogeneity than the samples prepared by coimpregnation. The results of probing with other techniques, i.e. catalytic probing with hydrodechlorination of CCl₂F₂ and XRD, were in line with TPHD data. The catalytic probing showed the presence of synergistic effect, a clear indication of Pd-Pt mixing. XRD data of post-reaction samples showed carbon incorporation into Pd-rich phase, whereas separate Pt-rich phase did not experience any bulk carbiding.     

Facial detection and location based on skin color and eye characteristic

This paper comes true a system of facial detection and location. Firstly, it realizes the facial detection of candidate region used skin color for the given image, and considers the influence of similar skin. Secondly, it realizes the location for eye region used the gray characteristic of eye and correction of central measurement, and makes further selection for facial candidate region. The end, it normalizes the facial image and makes it as front standard image, so realizes the facial characteristic location.     

长治市水资源优化配置及对策

文中介绍了长治市水资源的特点和水资源开发利用现状，并总结了长治市水资源开发利用中存在的问题。针对性地提出了合理配置水资源、建设节水型社会、开发新水源、建立高效运行管理体制、运用市场经济机制以及改革现行的水价政策等一系列措施．从而实现全市水资源的优化配置和合理使用，促进全市经济的全面发展。     

松辽流域初始水权分配实践与探索

根据松辽流域用水现状和需水预测,流域水资源承载能力将成为流域经济社会可持续发展的关键制约因素.节水型社会建设是解决这一问题的战略举措.水权制度建设和水市场建立是水资源管理适应市场经济的正确选择.面对松辽流域水资源管理的实际情况,流域初始用水权分配是实现战略举措的一项基础工作,也是水权制度建设和水市场建立的起步工作.结合松辽流域的具体情况,松辽委适时组织开展了流域初始用水权分配专题研究,并在霍林河与大凌河流域进行了初始用水权分配的实践探索.     

基于Matlab语言的液压特性曲线的绘制

Matlab语言强大的运算、仿真能力，被广泛用在液压控制系统中。利用Matlab语言可以进行液压特性曲线的绘制，液压控制系统稳定性的检测，也可以进行液压控制系统的仿真。这里以两个实例，即单、双喷嘴挡板阀压力流量特性曲线的绘制，以及液压转矩放大器系统稳定性的检测，来说明它的强大的功能。