耐高温微生物驱油提高低渗透油藏采收率先导性试验

胜利油田东辛高温低渗透油藏含蜡高,常温微生物无法存活,针对这一问题,引进美国NPC公司耐高温菌种,在Y6-16井组开展高温低渗油藏微生物驱油提高采收率研究和现场试验。施工后Y6-16井日增注52m3,表皮系数由施工前的2.069减小为施工后的-6.31,油层污染得到较好改善;原油含蜡量、胶质沥青质含量降低,轻质组分增加,重质组分降低;井组采收率提高5.09个百分点。     

注浆法在已建油罐地基加固中的应用

在一定的压力作用下,将水泥浆注入松散的地基土中,浆液凝固后将松散的土粒固结在一起,对地基进行加固。这种方法具有省时、省工、省费用、使用简单方便等优点。特别是对已建油罐地基的处理更有其独到之处。由于钻孔可在任意角度下进行,因此可对罐基础任何区域进行加固并达到较好的效果。文章对钻孔布置、钻孔、注浆花管布置、压力灌浆、充水预压等几项关键技术进行了较详细的论述。     

河北省张承地区风沙现状及治理对策

在分析张家口、承德地区风沙形成原因及发展趋势的基础上,提出了河北省防沙治沙工作中存在的问题,根据河北省不同类型区的自然、地理及社会经济条件,提出了风沙治理模式和建议。     

Effect of water inlet velocity on thermal stratification in a mantled hot water storage tank

Thermal stratification in a mantled hot water storage tank is analysed numerically for different water inlet velocities. The aim is to obtain higher thermal stratification and supply hot water for usage as long as possible. Twelve different water inlet velocities to the hot water storage tank are considered. The numerical method is validated by comparing its results against experimental and numerical results from the literature. It turned out that the results obtained from the numerical analysis have shown very good agreements with the results from previous works. As a result, the water temperature in the tank increases with the increase of the water inlet velocities to the mantle but this increment is not proportional. After a period of operation of 7.2 h, which corresponds to the average sunshine duration in Turkey, temperature increments of 6.5 and 35 K have been estimated for the hot water inlet velocities of 0.01 and 0.3 m s^?1, respectively, at a radial distance of 0.1 m and a height of 1 m inside the storage tank. Copyright © 2005 John Wiley & Sons, Ltd.     

油罐冒罐事故的原因分析及预防

通过事故实例分析，阐述油罐冒罐事故的原因，并针对原因提出要加强操作人员的责任心教育，完善各项规章制度，不断提高操作人员素质，严格遵守岗位操作规程，及时消除设备缺陷、完善罐区硬件设施和罐区实行现代科学管理等项措施。     

包装机中塑料薄膜常热式热封参数的实验研究

文中通过对包装机中常热式热封过程的分析及有效的实验，获得较为可靠的热封实验数据，并利用专业统计软件spss对实验数据进行处理，得到包装机中塑料薄膜的封口强度与操作参数之间的关系，为设计人员提供了一种获得最优操作参数的有效方法。     

Energy Dissipation at the Slug Nose and the Modeling of Solids Transport in Intermittent Flow

It is shown, by means of Lagrangian momentum and power balances across the slug nose in slug flow, that the power dissipated due to sudden expansion of the fluid in the film immediately downstream of the slug nose is greater than the power lost due to viscous action at the pipe wall but that it may not be large enough to materially aid particle transport. This has the implication that sand transport in intermittent flow may be considered as transport in a hybrid flow of hydraulic conveying and stratified flow when the length of the mixing section at the slug nose is short compared to the length of the slug body.     

水平井眼轨迹对气井出砂趋势及工作制度的影响

出砂是影响油气井正常生产的重要因素之一。借助FEPG有限元程序自动生成平台，建立了三维应力场弹塑性地层出砂模型，并运用有限元法计算分析了不同轨迹的裸眼井井壁周围的有效塑性应变分布规律及出砂趋势，研究了气藏压力衰竭对完井方式的影响。研究表明，水平井眼轨迹对出砂有重要的影响，同一地应力环境下向不同方位延伸的水平井在投产时应该采取不同的生产压差和不同的生产制度，水平井眼轨迹对出砂的影响程度随着3个地应力差异的增大而加剧。气藏压力衰竭对井壁的稳定性和出砂趋势都有重要影响。随着气藏压力的衰竭，井壁稳定性将变得越来越差，最终导致井筒出砂。因此，对气井完井不仅应该考虑到气藏开发初期地层的稳定性状况，而且还应该考虑到气藏压力衰竭后可能出现的井壁失稳问题。     

Effect of sillimanite beach sand composition on mullitization and properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

Mullite was developed by reaction sintering of sillimanite beach sand and calcined alumina. Two varieties of sillimanite beach sand viz. S and Z having different compositions were selected. Synthesis and properties of mullite were very much dependent on the sillimanite beach sand composition. Presence of higher amount of impurities in the Z-variety of sillimanite sand favours the densification by liquid phase formation. Presence of zircon in Z-variety increases the hardness and fracture toughness. Alumina addition improves the mechanical/thermomechanical properties of the samples. Mullite retains the usual orthorhombic habit of sillimanite. Rounded to sub rounded zirconia dispersed within the mullite matrix of the sample ZA is noticed.     

THE TENSILE STRENGTH OF WATER IN DEPRESSION TANK

This paper presents the data of tensile strength of water in depression tank whichwere measured by small venturi during cavitation investigation of a series of real project models.These measurements show that in depression tank water has slight tensile strength in case of highvacuum.But it influences the incipient cavitation number.In tests we also studied the influenceof tensile strength on scale effect of cavitation models.