不同压力下气层岩样m、n值变化的实验研究

胶结指数m和饱和度指数n变化规律的研究一直是岩石物理学家和测井解释分析家关注的问题。压力是影响m、n的重要因素,但迄今为止,仍未取得可使多数人接受的一般性结论。实验开展了低孔隙度低渗透率气层岩样在不同压力条件下的电阻率测量,在考虑孔隙度随压力变化的基础上建立了m、n参数随压力变化的关系,得出结论:某些地区的气层岩样在压力增大时即使考虑孔隙度变化,m值增大,n值减小。     

Criterion of Magnetic Saturation and Simulation of Nonlinear Magnetization for a Linear Multi-core Pulse Transformer

The linear multi-core pulse transformer is an important primary driving source used in pulsed power apparatus for the production of dense plasma owing to its compact,relatively low-cost and easy-to-handle characteristics.The evaluation of the magnetic saturation of the transformer cores is essential to the transformer design,because the energy transfer efficiency of the transformer will degrade significantly after magnetic saturation.This work propses analytical formulas of the criterion of magnetic saturation for the cores when the transformer driver practical loads.Furthermore,an electric circuit model based on a dependent source treatment for simulating the electric behavior of the cores related to their nonlinear magnetization is developed using the initial magnetization curve of the cores.The numerical simulation with the model is used to evaluate the validity of the criterion.Both the criterion and the model are found to be in agreement with the experimental data.     

后桥壳的可靠性优化设计

该文讨论了后桥壳的可靠性优化设计问题.在基本随机变量的概率特性已知的情况下,应用随机摄动法和约束随机方向法对后桥壳进行可靠性优化设计,并编制了实用的计算机程序,可以迅速准确地得到后桥壳的可靠性设计参数.     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

一族Liouville可积系及其双约束流的Hamilton系统

构造了Loop代数 A2的一个子代数,由此建立了一个3×3等谱问题,由屠规彰格式得到了一族Liouville意义下的可积Hamilton方程族。通过建立双对称约束,得到了该方程族的两组约束流,并将其化为广义Hamilton系统。     

光纤喇曼放大器的功率转换效率分析

在定义光纤喇曼放大器(FRA)功率转换效率(PCE)的基础上,考察了不同工作条件下光纤喇曼放大器的功率转换效率,分析PCE与光纤喇曼放大器的输入信号功率、输入泵浦功率和光纤长度的关系,比较了分布式与集总式FRA的功率转换效率,给出提高FRA功率转换效率的途径。     

波长为515nm的氩离子激光器的频率稳定

用声光晶体对氩离子激光作频率调制,获得了碘分子的差拍饱和吸收信号。将得到的斜率极陡的—阶微商形式的饱和吸收信号作为鉴频曲线把氩离子频率激光稳定到~(127)I_2分子的p(13)43—0的a_3超精细分量上。通过与一稳定到相同精细分量的稳频氩离子激光拍频,给出激光频率稳定性优于±6.5×10~(-12),重复性优于±3.4×10~(-11)。     

基于概念网络的文本信息监控技术

由于网上信息的迅速增长,文本信息监控已经成为网上信息管理中的热点研究课题。本文在模糊集和语义网络的理论基础上,构建了模糊值动态约束性概念网络,介绍了该概念网络的基本构建方法,并提出了基于概念网络的文本分析算法。     

应用吸水剖面资料确定吸水层动态残余油饱和度的方法

基于岩心长期注水试验资料，认识到吸水层的残余油饱和度的变化是一个缓慢减小的过程。文章给出了动态残余油饱和度的概念，提出了利用吸水剖面测井资料来确定动态残余油饱和度的方法。通过现场实测资料的解释，建立了动态残余油饱和度与吸水层每米累计吸水量的定量关系，为剩余油分布研究提供新思路。     

Evaluate the performance of a stochastic-flow network with cost attribute in terms of minimal cuts

This paper proposes a performance index to measure the quality level of a stochastic-flow network in which each node has a designated capacity, which will have different lower levels due to various partial and complete failures. The performance index is the probability that the maximum flow of the network equals the demand d without exceeding the budget b. A simple algorithm in terms of minimal cuts is first proposed to generate all upper boundary points for (d, b), and then the probability that the maximum flow is less than or equal to d can be calculated in terms of such points. The upper boundary point for (d, b) is a maximal vector representing the capacity of each arc such that the maximum flow of the network under the budget b is d. The performance index can be calculated by repeating the proposed algorithm to obtain all upper boundary point for (d−1, b). A benchmark example is shown to illustrate the solution procedure.