Semi—IPN复合材料的弹性性能和内耗的超声测定

本文用超声浸液法测量了单向纤维增强热塑性树脂及其半互穿聚合物网络(Semi-IPN)复合材料的杨氏模量、剪切模量、泊松比和内耗,并对不同树脂、纤维和Semi-IPN中共混组成比对弹性性能的影响进行了研究。     

Semi‐Global Output Feedback Stabilization for a Class of Uncertain Nonlinear Systems

This paper addresses the problem of semi‐global stabilization by output feedback for a class of nonlinear systems whose output gains are unknown. For each subsystem, we first design a state compensator and use the compensator states to construct a control law to stabilize the nominal linear system without the perturbing nonlinearities. Then, combining the output feedback domination approach with block‐backstepping scheme, a series of homogeneous output feedback controllers are constructed recursively for each subsystem and the closed‐loop system is rendered semi‐globally asymptotically stable.     

Feedback predictive control for constrained fuzzy systems with Markovian jumps

In this paper, a feedback model predictive control method is presented to tackle control problems with constrained multivariables for uncertain discrete‐time nonlinear Markovian jump systems. An uncertain Markovian jump fuzzy system (MJFS) is obtained by employing the Takagi‐Sugeno (T‐S) fuzzy model to represent a discrete‐time nonlinear system with norm bounded uncertainties and Markovain jump parameters. To achieve more generality, the transition probabilities of the Markov chain are assumed to be partly unknown and partly accessible. The predictive formulation adopts an on‐line optimization paradigm that utilizes the closed‐loop state feedback controller and is solved using the standard semi‐definite programming (SDP). To reduce the on‐line computational burden, a mode independent control move is calculated at every sampling time based on a stochastic fuzzy Lyapunov function (FLF) and a parallel distributed compensation (PDC) scheme. The robust mean square stability, performance minimization and constraint satisfaction properties are guaranteed under the control move for all admissible uncertainties. A numerical example is given to show the efficiency of the developed approach. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

半固态灰铸铁的制备与显微组织

建立了一种不需搅拌和其它附加处理的半固态灰铸铁制备技术 ,用浇注前合理调整熔体温度或调温 适当快冷的铸造方法 ,并配以合适的凝固冷却速度 ,成功地制备了球状初生奥氏体圆整、尺寸细小、分布均匀的半固态亚共晶灰铸铁 ,得到了最佳工艺条件 ,并用铸铁金相计算机辅助检测系统 ,对初生奥氏体的形状系数和等效直径进行了测量与统计分析 ,定量描述了半固态组织的特性     

A Semi‐Batch Process for Nitroxide Mediated Radical Polymerization

Summary: A semi‐batch process using nitroxide mediated polymerization, was explored for the design of low molecular weight solvent‐borne coatings, typical of those used in the automotive industry. While living radical polymerization (LRP) offers many advantages in the control of polymer chain microstructure that may confer important physical and chemical property benefits to coatings, adapting LRP to a semi‐batch process poses significant challenges in the design and operation of the process. Using styrene monomer, various two‐component initiating systems (free radical initiator, 4‐hydroxy‐TEMPO) were studied to understand the effects of different initiators on the course of polymerization. In addition, an alkoxyamine was synthesized and used as the initiating source. The initiators Luperox 7M75 and Luperox 231 give higher polymerization rates and reasonable control over polymerization, while benzoyl peroxide (BPO), Vazo 67, and the alkoxyamine are less effective. The number of polymer chains in the final product is always less than the theoretical value, reflecting poor initiation efficiency, probably resulting from undesirable termination reactions that become important due to the nature of the semi‐batch process. Adding camphorsulfonic acid (CSA) or charging initiator concurrently with monomer during semi‐batch feed, can increase the polymerization rate while maintaining the living character of the polymerization. The copolymerization of styrene and butyl acrylate is also shown to exhibit living character.

Schematic representation of the exchange reaction to produce N‐TEMPO capped polymer chains.     

基于磁流变阻尼器的车辆悬架系统模糊半主动控制

在对磁流变液和磁流变阻尼器的研究基础上 ,以磁流变阻尼器作为半主动控制元件组成模糊半主动悬架系统。运用数值仿真和试验研究等方法对基于磁流变阻尼器的模糊半主动悬架进行了研究。数值仿真和试验结果表明 ,设计的模糊半主动控制算法可对基于磁流变阻尼器的半主动控制悬架实现有效的控制     

3000m~3/h排烟循环流化床脱硫工艺中试实验研究

介绍了采用真实烟气的 30 0 0m3 /h排烟循环流化床烟气脱硫工艺 (CFB FGD)及其中间试验装置 ,通过实验研究了钙硫摩尔比 (Ca/S)、近绝热饱和温度差 (ΔT)、烟气湿度、喷水量、入口SO2 浓度、浆液雾化质量、脱硫灰循环等对脱硫效果的影响。实验表明 ,CFB FGD工艺在停留时间小于 6s、烟气流速v =4— 6m/s、Ca/S =1.2、ΔT =10— 12℃时可实现高达 90 %的脱硫效率。     

半刚性钢-混凝土组合节点受弯承载力的计算

在半刚性钢 -混凝土组合框架中 ,混凝土板中的纵向钢筋增加了节点的强度和刚度 ,但是 ,传统的设计方法往往忽略纵向钢筋的作用而采用简化的计算模型。因此 ,出于经济效益考虑 ,应该根据半刚性组合节点的实际受力性能建立更加准确的计算方法。这里详细介绍了考虑混凝土板纵向钢筋作用的半刚性组合节点受弯承载力的计算方法 ,计算结果表明 ,建议的公式与试验结果吻合良好 ,可供规范制定和工程应用参考。     

Studies on engineering properties of PVC–PMMA semi‐interpenetrating polymer networks

Semi1 and semi2 interpenetrating polymer networks (IPNs) of PVC and in situ formed PMMA have been synthesized using diallyl phthalate and ethylene glycol dimethacrylate as the crosslinkers of PVC and PMMA, respectively. These two types of IPNs have been compared w.r.t their physical, mechanical, and thermal properties and an endeavor has been made to find a correlation of these properties with the morphology generated in these systems. The semi1 IPNs displayed a decrease in their mechanical parameters and the physical properties as well, while in contrast, the semi2 IPNs exhibited a marginal increase in the corresponding values after an initial drop upto about 15% of crosslinked PMMA incorporation when compared to the crosslinked PVC in the case of semi1 IPN and linear PVC in the case of semi2 IPN. The various samples of semi1 and semi2 IPNs showed a two‐stage degradation typical of PVC, while confirming the increased stability with the samples having higher percentages of PMMA. The influence of crosslinking of the major matrix in semi1 IPN was almost counterbalanced by the influence of crosslinking in the dispersed PMMA phase in the case of semi2 IPN. The softening characteristics as detected by the extent of penetration of the probe, as has been detected by thermomechanical analysis, are in conformity with their mechanicals. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1725–1735, 2005     

Insolubilization of sodium chondroitin sulfate by forming a semi‐interpenetrating polymer network with acrylic acid: A potential carrier for colon‐specific drug delivery

To reduce the highly hydrophilic property of chondroitin sulfate (ChS), a semi‐interpenetrating polymer network (semi‐IPN) of chondroitin sulfate/polyacrylic acid (PAA) was prepared as a drug carrier by crosslinking acrylic acid with diethyleneglycol diacrylate. The swelling properties of the semi‐IPNs with different concentrations of crosslinking agent were correlated. The moisture sorption profiles were evaluated using differential thermal analysis. Ketoprofen was used as a drug probe to evaluate the performance of the drug released from the semi‐IPN matrices. The prepared semi‐IPNs demonstrated significant swelling reduction properties with both gastric and intestinal fluids compared with those of both the pure ChS and the ChSAA blend without the crosslinking agent. The amount of accumulated drug released from the semi‐IPNs was less than 30 wt % at pH 1.2 and up to 80 wt % at pH 7.4. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 114–122, 2002