Boronic acid-functionalized nanoparticles: synthesis by microemulsion polymerization and application as a re-usable optical nanosensor for carbohydrates

Translucent boronic acid-carrying nanolatexes are prepared by copolymerisation of vinylbenzyl chloride in microemulsion followed by post functionalisation with 3-aminophenylboronic acid. The diol binding capacity and selectivity of the phenylboronic acid remain unchanged after anchoring to polymer nanoparticles (16 nm diameter, 0.22 mmol/g). The binding of a catechol dye, Alizarin Red S (ARS), to the boronic acid-carrying nanoparticles affords a colored, stable, nanolatex which is used for the selective visual detection of fructose in a competitive assay. The binding of fructose at pH 8.2 is readily evidenced by a color change and monitored by UV/Vis spectroscopy. The nanosensor can be regenerated in acidic medium. The entrapment of the nanolatex in a dialysis cell provides a re-usable support for binding and optical detection.     

Estimation of access failure probability in D2D underlaid cellular networks

Device-to-Device (D2D) communication can reduce the mobile devices' energy consumption and increase the spectral efficiency in D2D underlaid cellular networks. However, D2D users will interfere with co-channel cellular users, which can lead to cellular communication access failures. There are two reasons for cellular communication access failures: (1)D2D interference and (2)insufficient spectrum resources. To address the absence of research on the performance of cellular services' access in D2D underlaid cellular networks, this paper defines the new services' access failure probability and handoff services' access failure probability to evaluate the effect of both D2D interference and limited resources on cellular communication access. Based on the stochastic geometry and stochastic process, a random network model is presented to estimate the access failure probabilities, which can provide guidelines for network design to ensure cellular services' access. The accuracy of the estimated access failure probability is validated through extensive simulations.     

基于超声传感技术在污水旋流池测量中的应用

为了能够准确地测量污水旋流池的液面高度,设计了基于超声传感技术的污水旋流池液面测量方法,通过长时间的运行,测量数据完全满足污水旋流池的生产工艺要求。     

智能投币机在城市公交上使用的改进分析

通过鱼骨图的方法对现有智能公交投币机存在识别率偏低的问题进行了分析,提出在智能投币机中采用闭式五角叶轮或增加硬币预处理部分,对现有的智能公交投币机进行改进,使智能公交投币机的硬币辨识率得到提高.     

Thermal error measurement and modelling in machine tools.: Part I. Influence of varying operating conditions

Thermal error in machine tools has been observed to be closely linked to the temperature of critical elements of the machine. It was found, in the experiments conducted herein, that there was a significant increase in the axis positioning error on account of an increase in the temperature of the machine elements due to continuous operation. However, it was also observed that the specific operating parameters of the test cycles carried out also significantly affected the positioning error. Different sets of operating parameters generated significantly different error values even though the temperature of the machine elements generated by those operating conditions was similar. As such, this observation forms a very important consideration in the development of a generic thermal error compensation system. It appears to indicate that such a system needs to be capable of evaluating the compensation depending upon the temperature values of the machine elements as well as account for the effect that different operating parameters induce upon the positioning error under the same thermal condition of the machine. This paper attempts to analyse the thermal behaviour of a three-axis vertical machining centre under the influence of various operating parameters and, through the experimental results obtained, point out and explain the effect of these parameters on the axis positioning error. This behaviour forms the basis of an improved modelling methodology that is presented separately in Part II of this paper.     

中厚板轧机工作辊失效分析及对策

介绍了济钢中厚板厂使用国外高镍铬和高铬工作辊的主要失效形式 ,并对该工作辊的断裂和裂纹产生原因进行了分析 ,同时针对所存在的问题提出了对策和具体改进措施。     

Evaluation of the coupled multielectrode array sensor as a real-time corrosion monitor

Coupled multielectrode array sensors made of carbon steel and stainless steels were evaluated and compared with electrochemical noise (EN) sensors. Good correlations between sensor signals and solution corrosivity were observed for all multielectrode array sensors. Some correlation between the average pit index and solution corrosivity was observed for the carbon steel EN sensors, but not for the stainless steel EN sensors. The time-average noise resistances from the stainless steel EN sensors correlate well with solution corrosivity. There were, however, large random fluctuations and drifting for all EN signals, which make the EN sensors unreliable as real-time monitors.     

基于无线网络的森林防火系统的研究与改进

论文针对现行的无线传感器技术方式的森林防火系统中的弊端,提出了一种改进的系统设计方案.改进后的方案主要采用二级Ad-Hoc模式的网络,对传统的无线传感器进行有效的改造的同时,也增加了稳定可靠的中心网络节点,无线通信网络采用改进后的AODV作为多跳路由协议,中心节点的数据处理采用卡尔曼滤波预处理,数据发送采用ALOHA机制进行随机延迟发送.系统经过反复实验,最终验证并总结出一套可以有效应用于实际工程中的系统部署方案.     

故障自动防护微机械角速度传感器

微机械角速度传感器是目前市场上能够进行批量生产的最复杂的传感器之一。它由在真空中做复杂运动的惯性质量块和驱动该设备、分析其响应的多种复杂电路组成,并集中于一个在极狭小的空间内。本文介绍了由奥地利SensorDynamics公司成功研制的一种MEMS角速率传感器,可以满足现代应用的全部要求,尤其是汽车工业所要求的小尺寸、坚固的机械结构、长期稳定性、不受限制的故障自动防护性和AEC-Q100认证。