Critical dynamics of a sheared micellar solution

We have investigated the dynamic behavior of a nonionic micellar solution of tetra-ethylene glycoln-decylether (C₁₀ E₄) in water near its critical point in the presence of shear. The non-Newtonian behavior of the viscosity can be represented by * = [ 1 +a(S₄)=]², where* is the viscosity in the absence of shear,S is the shear rate. ₄ is the lifetime of the critical Iluctuations,a is a system-dependent constant, and = 0.02 In addition, we have found that, before attaining a steady state, the sheared mixture undergoing phase separation shows significant shear-dependent rheological effects due to the presence of concentration domains.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24. 1994, Boulder, Colorado, U.S.A.     

Recent development and applications of an optical method for measurements of thermophysical properties

The experimental determination of thermophysical properties has been greatly improved by the introduction of laser technology. The laser beam is used for sensing and also for heating (or exciting) the specimen. The advantage of using a laser beam is most strongly felt in the measurement of the thermal conductivity or the thermal diffusivity, which are some of the most difficult properties to measure. Interesting features of new techniques for investigating various aspects of thermal conductivity in fluids and solids are reviewed. An optical method, the so-called forced Rayleigh scattering method, or the laser-induced optical-grating method, has been developed and used extensively by the present author's group. The method is a high-speed remote-sensing method which can also quantitatively detect anisotropy, namely, direction dependence of heat conduction in the material. It was used for determination of the thermal diffusivity and its anisotropic behavior for high-temperature materials such as molten salts, liquid crystals, extended polymer samples, and flowing polymer melts under shear. Interesting applications of the method were demonstrated also for thermal diffusivity mapping and microscale measurement.Invited paper presented at the Twelfth symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

辐射换热的波长匹配问题

由于水的选择性吸收特性,辐射换热中水份波长匹配一直是一个有分歧的问题。文章通过理论与计算论证了这个问题,得出的结论否定了波长匹配的重要性。     

圆柱壳弹性波超材料分级排列的带隙拓宽方法研究

圆柱壳弹性波超材料的弯曲波带隙拓宽问题限制其满足实际工程中的宽频隔振要求,针对该问题,本文首先研究了基于局域共振机理的圆柱壳弹性波超材料弯曲波带隙特点,研究局域谐振器质量和弹簧劲度系数的关系,然后将周期分级排列的组合方式应用于圆柱壳类弹性波超材料的带隙拓宽中,并利用有限元法进行能带结构和振动传输特性计算.研究结果显示：该方法可实现弯曲波带隙的拓宽;利用组合法构建的轴向周期分级排列圆柱壳弹性波超材料可实现705-1226Hz频率范围内弯曲波的高效衰减,带隙拓宽至分别为单一谐振器的2.55倍,这表明该方法在宽频减振方面具有明显优势,应用前景广阔.     

宽翼T形梁桥动力学理论与特性分析

考虑了剪滞翘曲应力自平衡条件、剪切变形和剪力滞后效应等因素的影响,本文提出了一种对宽翼薄壁T形梁动力学特性的分析方法.分析中为了准确反应T形梁翼板的动位移变化,三个广义动位移被引入,且以能量变分原理为基础建立了T形梁动力反应的控制微分方程和自然边界条件,据此对T形梁的动力反应特性进行了分析,揭示了T形梁桥动力反应的规律.算例中,对比了考虑和不考虑剪滞翘曲应力自平衡条件对T形梁动力反应的影响,结果显示考虑剪滞翘曲应力自平衡条件的计算方法与有限元数值解吻合更好.     

A review on mechanisms and recent developments of nanomaterials based carbon fiber reinforced composites for enhanced interface performance

Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength.     

MATLAB仿真在基带传输教学中的应用

根据基带传输相关课程内容的特点,提出采用MATLAB/Simulink仿真来进行演示和实验以解决相关的问题。同时阐述了使用MATLAB/Simulink对基带传输系统仿真的过程。     

Analysis of frequency‐selective impedance loading of transmission lines for dual‐band couplers

This article proposes an analytical design methodology for dual‐band hybrid couplers and baluns structures for any arbitrary frequency ratio using a stub‐loaded transmission line. An analysis of changing the impedance behavior of the stub, is carried out for the two bands of operation, which along with a dispersive analysis, emphasizes certain conditions where the existing methodology is not applicable. In addition, an extra degree of freedom has been included to increase the solutions for a given frequency ratio, thus providing greater flexibility and feasibility of the proposed structure. The design methodology is experimentally validated with the design and fabrication of dual‐band branch‐line and rat‐race couplers for various commercial frequency bands. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2011.     

Structure damage diagnosis using neural network and feature fusion

A structure damage diagnosis method combining the wavelet packet decomposition, multi-sensor feature fusion theory and neural network pattern classification was presented. Firstly, vibration signals gathered from sensors were decomposed using orthogonal wavelet. Secondly, the relative energy of decomposed frequency band was calculated. Thirdly, the input feature vectors of neural network classifier were built by fusing wavelet packet relative energy distribution of these sensors. Finally, with the trained classifier, damage diagnosis and assessment was realized. The result indicates that, a much more precise and reliable diagnosis information is obtained and the diagnosis accuracy is improved as well.     

Ka频段卫星通信上行链路自适应功率控制

为提高Ka频段（30GHz／20GHz）卫星通信系统上行链路功率控制的可靠性,提出一种上行链路自适应功率控制算法。该方法基于自回归滑动平均模型,能由测量到的下行链路降雨衰减值预测出上行链路的降雨衰减值,从而提高功率控制精度。仿真结果表明,该方法对降雨衰减具有较好的补偿效果。