保护胶体稳定的丙烯酸酯乳液流变性

分别采用常规乳化剂和羟乙基纤维素为保护胶体制备丙烯酸酯乳液。通过TEM分别观察乳胶粒的形态。利用流变仪测定剪切速率（Ds）-剪切应力（τ）关系、剪切速率（Ds）-黏度（η）关系。结果表明：采用羟乙基纤维素为保护胶体制备的乳液与常规乳液具有不同结构，该结构使其乳液体系流变性能不同。在相同剪切速率下，保护胶体制备的丙烯酸酯乳液的剪切力明显大于常规乳液的剪切力，该乳液在一定剪切速率范围内有剪切稀化现象。     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

Building a research network to better understand climate governance in the Great Lakes

Climate-driven disturbances threaten the sustainability of coastal communities in the Great Lakes Basin. Because such disturbances are unpredictable, their magnitude, number and intensity are changing, and they occur at varying temporal and spatial scales. Consequently, communities struggle to respond in effective ways. The expected intensification of climate-driven disturbances will require that community capacity and governance structures match the spatial and temporal scales of these disturbances, as the most sustainable social and economic systems will be those that can respond at similar frequencies to key natural system drivers. The Climate Governance Variability in the Great Lakes Research Coordination Network (CGVG-RCN) was recently established to address questions about the relationship between climate-driven disturbances and community response. The objective of this short communication is to introduce the ideas behind the CGVG-RCN, outline its goals, and facilitate engagements and collaboration with social and natural scientists interested in social-ecological systems in the Great Lakes Basin.     

应用WCA微扰理论推算非极性液体比热容的新方法

本文首次将统计热力学的Ｗｅｅｋｓ－Ｃｈａｎｄｌｅｒ－Ａｎｄｅｒｓｏｎ（简称ＷＣＡ）微扰理论应用于非极性液体定容比热容和定压比热容的推算，用一些液体的ｐ－ｖ－Ｔ实验数据拟合了理论中所用ＬＪ势能函数的势能参数，并提出一个通用关联式。本文方法具有通用性，在编制的计算程序中只需输入物质的临界温度、临界比容、偏心因子等就能算出相应的比热容，工程应用十分方便。     

ESTIMATION OF EFFECTIVE SHEAR RATE FOR AERATED NON-NEWTONIAN LIQUIDS IN AIRLIFT BIOREACTOR”“

Effective shear rate is one of the indispensable parameters for the design of aerobic fermentors using a viscous non-Newtonian system. The estimation of effective shear rate in airlift loop bioreactors has been investigated with liquid circulation velocity. An empirical correlation of effective shear rate in airlift loop reactors is proposed.

γ_eπ= 3.26-3.51 ; 10²U_G + 1.48 10⁴U²_G

It is found that the effective shear rate is lower in airlift reactors than in bubble columns. This equation can be used for the cultivation of cells sensitive to shear stress.     

Short‐beam three‐point bend test study in syntactic foam. Part III: Effects of interface modification on strength and fractographic features

Syntactic foam slabs having uncoated microballoons and paraffin oil surface‐treated microballoons were fabricated and tested for short‐beam three‐point bend test. The work points to the role of paraffin oil coating first weakening the interface between the microballoons and the matrix and hence lowering the efficiency of load transfer from matrix to the fillers (i.e., microballoons). This led to an overall decrement of 71% in the experimentally measured strength value compared to the deduced value for uncoated microballoons' specimens. The large strengths for uncoated microballoons specimens can be traced to the presence of the curvilinear marks in the matrix that, incidentally, are absent in the case of paraffin oil coated specimens. These observations are revealed distinctly in the microscopy of test‐failed specimens. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 687–693, 2005     

非饱和黏性土直剪强度特性及其修正分析

为研究非饱和黏性土的直剪强度特性,采用非膨胀土及两种不同干密度的弱膨胀土进行了包含低应力状态下8种不同上覆压力的直剪试验。试验结果表明,随着上覆压力的增大,最大剪应力及所对应的剪切位移逐渐增大,试验中低应力状态下测定的土体凝聚力小于高应力状态,且试验中的上覆压力对膨胀性土凝聚力的影响大于非膨胀性黏土;而低应力状态下测定的土体内摩擦角大于高应力状态。对直剪试验中上下盒接触面积减小对抗剪强度参数测定的影响进行了分析,分析表明,接触面积减小对抗剪指标有影响,但极其微小。提出对膨胀土边坡浅层破坏进行稳定性分析时应采用低应力下的抗剪强度参数。     

锂离子电池正极材料LixMn2O4研究进展

总结了锂离子电池正极材料LixMn2O4的合成方法，归纳了造成容量衰减问题的原因和目前为解决该问题所采用的各种方法，并且对下一步的研究工作进行了展望。     

PTA装置改造中的技术探讨

概述了天津石化公司 2 50 kt/ a PTA装置一期 4个系统和空压机等方面的改造 ,对进一步改造将遇到的空压机系统、氧化反应器及其顶部冷凝系统、醋酸脱水塔系统、加氢预热系统、干燥机系统的有关问题进行了探讨 ,并提出进行设备极限能力标定、在操作时间上挖潜及进一步优化二期改造方案的若干建议。     

采用不同锰源合成尖晶石LiMn2O4正极材料

The spinel LiMn2O4 cathode material was synthesized with the solid-state reaction method. Four manganese compounds including electrolytic manganese dioxide (EMD), MnCO3, Mn3O4 and nano-EMD were used as Mn sources while LiOH·H2O was used as the uniform Li source. The crystal structure characteristics of these samples produced were investigated by means of XRD, SEM, particle size distribution analysis and specific surface area testing. Their electrochemical properties were also studied by comparing their specific capacity, charge and discharge efficiency and cycle performance.