增加GSM系统网络容量的研究

本文针对日益激化的移动终端用户需求与受限频率资源的GSM系统网络容量间的矛盾,提出了GSM理论网络容量与载干比C／I间的计算方法,对GSM系统网络容量与移动通话质量间的关系进行了定量分析,同时提出了AMR-HR、COMMONBCCH等新技术,在尽可能维护无线通话质量的情况下提升GSM网络容量。     

Critical dynamics of a sheared micellar solution

We have investigated the dynamic behavior of a nonionic micellar solution of tetra-ethylene glycoln-decylether (C₁₀ E₄) in water near its critical point in the presence of shear. The non-Newtonian behavior of the viscosity can be represented by * = [ 1 +a(S₄)=]², where* is the viscosity in the absence of shear,S is the shear rate. ₄ is the lifetime of the critical Iluctuations,a is a system-dependent constant, and = 0.02 In addition, we have found that, before attaining a steady state, the sheared mixture undergoing phase separation shows significant shear-dependent rheological effects due to the presence of concentration domains.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24. 1994, Boulder, Colorado, U.S.A.     

Recent development and applications of an optical method for measurements of thermophysical properties

The experimental determination of thermophysical properties has been greatly improved by the introduction of laser technology. The laser beam is used for sensing and also for heating (or exciting) the specimen. The advantage of using a laser beam is most strongly felt in the measurement of the thermal conductivity or the thermal diffusivity, which are some of the most difficult properties to measure. Interesting features of new techniques for investigating various aspects of thermal conductivity in fluids and solids are reviewed. An optical method, the so-called forced Rayleigh scattering method, or the laser-induced optical-grating method, has been developed and used extensively by the present author's group. The method is a high-speed remote-sensing method which can also quantitatively detect anisotropy, namely, direction dependence of heat conduction in the material. It was used for determination of the thermal diffusivity and its anisotropic behavior for high-temperature materials such as molten salts, liquid crystals, extended polymer samples, and flowing polymer melts under shear. Interesting applications of the method were demonstrated also for thermal diffusivity mapping and microscale measurement.Invited paper presented at the Twelfth symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

The capacitated multi-AGV scheduling problem with conflicting products: Model and a decentralized multi-agent approach

Automated guided vehicles (AGVs) are a key technology to facilitate flexible production systems in the context of Industry 4.0. This paper investigates an optimization model and a solution using a decentralized multi-agent approach for a new capacitated multi-AGV scheduling problem with conflicting products (CMASPCP) to take full advantage of AGVs. The novelty of the problem and our model lies in the introduction of AGV capacity constraints and constraints arising from conflicting products, i.e. products that cannot be transported together. As the new I4.0 paradigm tends towards decentralized control, we also present a decentralized multi-agent approach in which AGVs autonomously coordinate to solve the task. The performance of the proposed decentralized approach is compared to a mixed-integer linear programming model on a set of 110 problem instances with different sizes and degrees of complexity. The obtained results show that the proposed decentralized multi-agent approach is effective and competitive in terms of the solution quality and computational time.     

宽翼T形梁桥动力学理论与特性分析

考虑了剪滞翘曲应力自平衡条件、剪切变形和剪力滞后效应等因素的影响,本文提出了一种对宽翼薄壁T形梁动力学特性的分析方法.分析中为了准确反应T形梁翼板的动位移变化,三个广义动位移被引入,且以能量变分原理为基础建立了T形梁动力反应的控制微分方程和自然边界条件,据此对T形梁的动力反应特性进行了分析,揭示了T形梁桥动力反应的规律.算例中,对比了考虑和不考虑剪滞翘曲应力自平衡条件对T形梁动力反应的影响,结果显示考虑剪滞翘曲应力自平衡条件的计算方法与有限元数值解吻合更好.     

A review on mechanisms and recent developments of nanomaterials based carbon fiber reinforced composites for enhanced interface performance

Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength.     

马钢2500m~3高炉炉渣的冶金性能

在目前的原燃料条件下,为保证马钢2500m3高炉炉渣具有良好的流动性和较高的脱硫能力,炉渣的CaO／SiO2应控制在1．05至1．15之间,炉渣温度不低于1450℃．     

智能科学与技术专业实践教学体系改革

针对智能科学与技术专业存在综合性和创新性实践教学环节相对薄弱的问题,在分析智能科学与技术专业特点的基础上,提出以"智能康复装置与检测技术"教育部工程研究中心为平台,以各种竞赛为契机,建立以培养人才工程能力和创新能力为主线的实践教学体系的观点。     

高速公路收费站ETC车道通行能力分析

文章在深入分析实际调查数据的基础上,对高速公路收费站ETC车道交通流特性进行了深入分析,计算得出不同等级服务水平下的ETC车道最大服务交通量,并提出了一套分析ETC车道通行能力的计算方法.     

Multi-sector multi-range control for self-organizing wireless networks

In this paper, we propose a distributed multi-sector multi-range (MSMR) control algorithm for supporting self-organizing wireless networks. The algorithm enables us to reduce the unnecessary coverage with fine-tuned range control and also to increase the network-wide capacity with enhanced spatial reusability. The proposed algorithm discovers neighboring nodes within the maximum transmission range at every node, divides its transmission area into multiple non-overlapping angular sectors of a given degree, chooses the home sector for each neighboring node according to its relative position, and constructs a spanning subgraph per sector by determining appropriate transmission range to maintain connectivity. Since the range control influences on network connectivity directly, we prove in the first place that the proposed algorithm preserves both network-wide and local connectivity as far as both connectivity exist in the network that uses the maximum transmission range. In order to investigate the performance of the proposed algorithm, we implemented it in the ns-2 simulator, and performed an extensive set of simulation study in comparison with other transmission range control schemes. The simulation results indicate that the proposed scheme is superior to other schemes with respect to the network-wide throughput and its normalized value per energy in various simulation configurations. In specific, the algorithm achieves minimally one order and maximally two orders of magnitude improvement in those performance evaluations. The improvement becomes more salient as the number of nodes increases and is immune to traffic type, network size, node distribution, or node density.