RPF-AA改性纤维的制备及耐硫酸侵蚀性研究

通过对普通腈纶进行特殊预处理和改性,制备出一种具有良好抗浓酸侵蚀性的反应性高分子纤维材料,对改性纤维材料的化学(酸)稳定性、力学性能、微结构等特征性能研究表明:该纤维材料在120℃和98%浓硫酸环境条件下,经过20 min的侵蚀性处理后,其材料仍能够保持一定的力学性能和微结构,显示了突出的抗浓硫酸侵蚀性.     

Comparison of relative viscosity measurement of polyvinylpyrrolidone in water by glass capillary viscometer and differential dual‐capillary viscometer

The relative viscosity (RV) of polyvinylpyrrolidone (PVP) with different molecular weights was measured with a glass capillary viscometer and with a differential dual‐capillary viscometer in water at different concentrations. For the differential dual‐capillary viscometer, RV increases with a decreasing flow rate, especially for high molecular weight PVP at a 1% concentration. A good agreement in the RV between the two methods can be obtained for PVP with different molecular weights and at various concentrations if an appropriate flow rate is selected for the differential dual‐capillary viscometer. Special precaution is needed when using the differential dual‐capillary viscometer to measure the viscosity of a pure solvent. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1312–1315, 2002     

潮汐双向流条件下丁坝水流特性研究

以长江口南支河段为原型,概化并建立水槽数学模型,研究径潮双向流条件下丁坝附近的水流结构。研究表明:丁坝一侧河岸,丁坝下游潮差远大于上游,在丁坝上游潮差小于对岸侧,下游潮差大于对岸侧;落潮时,丁坝回流区与壅水区长度大于涨潮,转流时刻,丁坝坝头附近流速相对较大;河床底部剪切应力变化在涨落急时刻最大,且落潮大于涨潮,转流时刻坝头及坝身迎水侧剪切应力增加明显。     

抗地震结构的服役费用函数及其建立方法

讨论了服役工程结构的经济性问题 ,包括 :抗地震结构在服役过程中为完成预定功能所需要的经济花费、这些花费同结构抗震可靠度的函数关系以及它们的建立方法。形成的服役费用函数可以作为决策结构最佳抗震设防标准的依据。     

Mechanical and morphological properties of carbon fiber reinforced–modified epoxy composites

Epoxy, prepared through aminomethyl 3,5,5‐trimethylcyclohexylamine hardening of diglycidylether of bisphenol‐A (DGEBA) prepolymer, toughened with polycarbonate (PC) in different proportions, and reinforced with carbon fiber, was investigated by differential scanning calorimetry, tensile and interlaminar shear strength testing, and scanning electron microscopy (SEM). A single glass transition temperature was found in all compositions of the epoxy/PC blend system. The tensile properties of the blend were found to be better than that of the pure epoxy matrix. They increased with PC content up to 10%, beyond which they decreased. The influence of carbon fiber orientation on the mechanical properties of the composites was studied, where the fiber content was kept constant at 68 wt %. Composites with 45° fiber orientation were found to have very weak mechanical properties, and the mechanical properties of the blend matrix composites were found to be better than those of the pure epoxy matrix composites. The fracture and surface morphologies of the composite samples were characterized by SEM. Good bonding was observed between the fiber and matrix for the blend matrix composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3529–3536, 2006     

Corrosion-resistant lightweight metallic bipolar plates for PEM fuel cells

Corrosion resistant treated metal bipolar plates with higher rigidity and electrical conductivity than graphite were developed and tested for PEM fuel cell applications. Six replicas of single cells were used three of which were made of graphite composites bipolar plates and the other three of the treated metallic plates. A Membrane Electrode Assembly (MEA) with 5.55 cm² active electrode areas, 0.3 mg cm^–2 Pt loading and Nafion membrane 115 was fitted to each cell and operated under identical conditions. The experimental testing was conducted at room temperature (20 °C). The average value of the data obtained for the three graphite cells was plotted. Similarly, the average value of the data obtained for the three treated metal cells was plotted on the same graph for comparison. Generally, the treated metal bipolar plate provided at least 12% saving in hydrogen consumption in comparison to graphite. This is attributed to the lower bulk and surface contact resistance of the metal used in this study in relation to graphite. The results of lifetime testing, conducted at room temperature under variable loading showed no indication of power degradation due to metal corrosion for at least 1500 hours.     

耐水性木材用脲醛粘合剂的研究

研究了改进胶合板用脲醛粘合剂的耐水性的方法。针对脲醛粘合剂耐水性低的原因,提出在胶液中添加碱性物质——耐水添加剂,可显著改善胶合板的耐水性,几种添加剂并用,胶合板可达一级耐水板的水平。     

Modification of non‐Newtonian flow behavior of aqueous solution of poly(vinyl alcohol) by conducting polypyrrole prepared by in situ polymerization of pyrrole

The rheological behavior of an aqueous solution of poly(vinyl alcohol) (PVA) and polypyrrole (PPY) dispersions prepared by ferric chloride (FeCl₃)‐catalyzed polymerization of pyrrole was investigated at 12°C using a coaxial rotational viscometer. The results show that the addition of a low dose of FeCl₃ to the PVA solution greatly influences its rheology. The prominent shear‐thickening (dilatant) nature of PVA turns significantly pseudoplastic (shear thinning) in the presence of FeCl₃. Polypyrrole‐loaded PVA was obtained in a stable, optically clear dispersion by in situ polymerization of pyrrole in an aqueous PVA solution (5%) using FeCl₃ as the oxidative catalyst at 12°C. The PPY dispersions in aqueous PVA systems having a low loading of PPY and low Fe⁺³ content retain the dilatant character of an aqueous PVA solution; however, for an aqueous PVA system having a relatively high PPY loading and also a high Fe⁺³ content, prominent pseudoplastic (shear thinning) behavior is exhibited. The odd novel rheological patterns exhibited by a PVA solution in the absence and presence of FeCl₃ and the PVA–PPY dispersions containing FeCl₃ under different sets of conditions are explained on the basis of the complexation of PVA by Fe⁺³ and related ions and also as a consequence of some degree of H‐bonding and chemical grafting between the support polymer PVA and the PPY formed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3737–3741, 2004     

A Unified Model for the Mixing of Non‐Newtonian Fluids in the Laminar,Transition, and Turbulent Region

Summary: Non‐Newtonian fluid behavior has significant influence on quantities in chemical engineering like power input, mixing time, heat transfer etc. In the laminar flow region, the concept of effective viscosity by Metzner and Otto is well established. In the transition region between laminar and turbulent flow, the existing concepts use three and even more empirical parameters to determine the specific power input. Here, a unified and general but simple approach is introduced to calculate the power input for shear thinning fluids over the whole flow region using just one empirical parameter. The Metzner‐Otto relation is obtained as a limiting case for the laminar region. The empirical parameter of the new approach is related to the Metzner‐Otto constant. The concept is validated for eight different stirrer systems. Mixing time and maximum shear rate and heat transfer can also be calculated using this approach. The new concept presented should also be applicable for other apparatuses, e.g., static mixers.

Comparison of experimental data and a curve calculated according to the new method (solid line).