同步带成型工艺的探讨

介绍模压法橡胶同步带成型工艺流程及装备，重点阐述了耐磨布套的制作，强力层的缠绕，张力的控制及张力器原理，最佳胶层厚度控制，及它们与成品带质量的关系。     

Sintering technology for micro heat pipe with sintered wick

In order to study reasonable sintering technological parameters and appropriate copper powder size range of micro heat pipe (MHP) with the sintered wick, the forming principle of copper powders in wicks and MHP’s heat transfer capabilities were first analyzed, then copper powders with different cell sizes and dispersions were sintered in RXL-12-11 resistance furnace under the protection of the hydrogen at different sintering temperatures for different durations of sintering time, and finally the sintered wicks’ scanning electron microscope (SEM) images and their heat transfer capabilities were analyzed. The results indicate that the wick sintered with copper powders of larger cell size or smaller size range has better sintering properties and larger heat transfer capabilities; and that the increase of either sintering temperatures or sintering time also helps to improve the wick’s sintering properties and heat transfer capabilities, and the former affects more obviously than the latter. Considering both its manufacturing cost and performance requirements, it is recommended that copper powders with the size range of 140–170 μm are sintered at 900–950°C for 30–60 min in practical manufacturing. In addition, two approaches to improve wick’s porosity are also proposed through theoretical analysis, which suggests that the larger the wick’s porosity, the better the heat transfer capabilities of the MHP.     

Synthesis, structure and mechanical properties of Zr-Cu-based bulk metallic glass composites

The unusual glass-forming ability(GFA) of the Zr_(48)Cu_(36)Ag_8Al_8 alloy and the high ductility of the Zr_(48)Cu_(36)Ag_8Al_8 metallic glass-matrix composites containing Ta powder were reported.The bulk metallic glass rod with a diameter of 25 mm was successfully synthesized using copper mold casting for the Zr_(48)Cu_(36)Ag_8Al_8 alloy.High GFA of this alloy was found to be related to a large supercooled liquid region and a quaternary eutectic point with low melting temperature.The bulk metallic glass...     

Ca—Mg系复合凝聚剂富集分离造纸法烟草薄片废水处理及资源化研究

采用制备的Ca—Mg系复合凝聚剂,对造纸法烟草薄片废水进行高效固-液分离,以大大降低后续生化处理负荷。获得的污泥固体富含烟碱类物质而进一步提取,用于生物源杀虫剂的活性成份;提取后的污泥固体用作粉状杀虫剂的载附剂,完全达到资源化利用。采用该法单级分离COD去除率可达到70％-80％,具有一定实用价值。     

板料拉延成形的数值模拟与网格试验法

为了对板料拉延进行缺陷预测,在分析板料成形数值模拟和网格试验技术的基础上,采用数值模拟进行拉延成形分析,以及网格试验法进行成形缺陷成因判断,并将两者综合应用进行拉延成形缺陷预测和工艺优化的实例中.     

韧性断裂准则在板料成形中应用研究进展

对板料成形中的成形极限应力图、最大变薄率、成形极限图以及韧性断裂准则等预测成形极限的方法进行了综述和分析,提出了利用韧性断裂准则能够较好地预测塑性差的板料成形极限,而且还能考虑应变路径的变化.利用有限元方法模拟时,韧性断裂准则既可以运用到完全耦合的弹塑性损伤模型的增量方法中,也可以运用到一步有限元逆算法中.指出了为准确地预测成形极限,除了提高有限元模拟精度外,应找到一种本质地反映材料性能的准则.     

薄壁管件胀形液压机关键技术的研究

介绍了薄壁管件胀形液压机的胀形原理、液压系统设计及其关键技术。阐述了薄壁管件胀形液压机高压介质的产生和轴向同速推制的关键问题,分析了乳化液充液和增压器增压过程。     

原子尺寸因素对块体非晶形成能力的影响

块体非晶的研究无论在理论上还是在应用上都有重要意义,而非晶形成能力是决定非晶制备的关键因素之一.通过研究原子尺寸分布对非晶形成能力的影响,计算了原子尺寸差函数与合金非晶形成能力间的关系,系统地分析了其机理,并对其合理性进行了验证.结果表明,原子尺寸差函数可以估计合金体系的非晶形成能力.相同合金体系中,非晶形成能力与基元素的原子百分含量存在线性关系.     

管板和传热管胀接应力应变的数值模拟及分析

蒸汽发生器是核电厂一回路与二回路的枢纽,传热管和管板的连接处为事故多发区,而机械加工过程残留的应力是引起裂纹的主要原因.应用有限元软件对某型蒸汽发生器中的传热管和管板的胀接过程进行瞬态模拟,得到不同胀接压力下的管板和传热管的残余应力和残余应变值,为传热管和管板最佳胀接参数的确定以及工作过程中应力腐蚀的预防提供理论依据.研究结果标明,管板孔表面的残余径向应力和残余径向应变值都是随胀接压力的增加而增加,且沿着轴向的变化规律相似.