Boundary feedback stabilization of the telegraph equation: Decay rates for vanishing damping term

We study a semilinear mildly damped wave equation that contains the telegraph equation as a special case. We consider Neumann velocity boundary feedback and prove the exponential stability of the closed loop system. We show that for vanishing damping term in the partial differential equation, the decay rate of the system approaches the rate for the system governed by the wave equation without damping term. In particular, this implies that arbitrarily large decay rates can occur if the velocity damping in the partial differential equation is sufficiently small.     

波浪对渤海近岸海冰冲击作用的数值模拟

海冰在波浪冲击作用下可能会发生断裂,通过数值模拟定量地描述波浪引起的海冰断裂对海工结构的运行安全以及分析海冰断裂处海水与大气之间的热交换有重要作用。该文利用建立的三维数值波浪水池,将海冰视为刚性平板,结合渤海冬季海冰、波浪的相关参数,研究海冰受波浪冲击的垂向冲击力、水平冲击力、弯矩和最大弯曲正应力随波高、冰长及冰厚的变化规律;并结合渤海海冰的弯曲强度,推断海冰发生断裂的极限参数,结果表明:在渤海海域某些特定条件下,海冰断裂极限波高、冰长和最小冰厚分别为0.504 m、4.273 m和0.098 m。     

固体推进剂燃烧机理诊断方法的研究进展

介绍和评述了诊断含能材料热分解和推进剂燃烧波结构的方法、仪器和研究进展,以及含能材料和推进剂热分解和燃烧波结构的研究结果,探讨了燃烧机理研究方法的发展方向。提出需要不断完善和更新推进剂燃烧的诊断方法,以获得更为全面的接近真实条件下推进剂燃烧的有效信息。附参考文献14篇。     

On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

Structure of the Reaction Zone of a Steady Detonation Wave in Dinitrodiazapentane

The massvelocity profiles in 2,4dinitro2,4diazapentane samples of different densities were registered by a laser interferometer and the electromagnetic technique. The reaction time was shown to reach 300 nsec and weakly depend on density, while the pressure in the chemical spike can be twice as high as that at the Chapman–Jouguet point. No special features due to diamond formation were observed in the massvelocity profiles registered in the chemical reaction zone.     

基于可调功率因数的单相AC－DC变换电路设计

本文以2013年全国大学生电子设计竞赛A题为依据,设计的单相AC-DC变换电路32位的STM32f103作为主控制器,主电路由220V市电经过自耦变压器,隔离变压器降至20-30V交流电,后接全桥整流电路,使电路稳定输出36V直流电,主电路通过硬件电流电压PI闭环控制,双环控制来调节输入的电流和输出电压,输入的交流电压和交流电流通过互感器采到单片机内,程序通过改变产生的正弦波的相位来改变功率因数,从而达到功率因数可调的目的,使设计的电路能包含题目中要求的所有部分,并通过优化而达到题目的要求,在主电路中加入继电器,控制继电器断开从而实现过流保护的功能。     

基于次生波的输电线路智能驱鸟装置设计

为了减小鸟类对输电线路可靠性的影响,利用次声波驱鸟原理,设计了一种新型的智能型驱鸟装置,该装置具有一定的实用价值.     

Interaction of a shock pulse with a contact discontinuity

Passing of a triangular moderate-intensity pulse through a constant discontinuity is considered. Decay of the shock wave that passed into the second gas is analyzed. Damping of the detonation wave after burnout of the combustible mixture is discussed. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 4, pp. 102–107, July–August, 2007.     

Processing and characterization of particles reinforced SiOC composites via pyrolysis of polysiloxane with SiC or/and Al fillers

Polysiloxane loaded with SiC as inert filler, and Al as active filler, was pyrolyzed in nitrogen to fabricate SiOC composites, and the processing and properties of the filled SiOC composites were investigated. Adding SiC fillers could reduce the linear shrinkage of filler-free cured polysiloxane in order to obtain monolithic SiC/SiOC composites. The flexural strength of SiC/SiOC composites reached 201.3 MPa at a SiC filler content of 27.6 vol.%. However, SiC/SiOC composites exhibited poor oxidation resistance, thermal shock resistance and high temperature resistance. Al fillers could react with hydrocarbon generated during polysiloxane pyrolysis at 600 °C and N₂ at 800 °C to form Al₄C₃ and AlN, respectively. The volume expansions resulting from these two reactions were in favor of the reduction in linear shrinkage and the improvement in flexural strength of SiC/SiOC composites. The flexural strength of Al-containing SiC/SiOC composites was 1.36 times that of SiC/SiOC composites without Al at an Al filler content of 20 vol.%. The addition of Al fillers remarkably improved the high temperature resistance and oxidation resistance of SiC/SiOC composites, but not thermal shock resistance.     

Dynamic Compressibility of Carbamide at Low Pressures

The shock adiabats of pressed carbamide samples with a density of 1.29 g/cm³ and carbamide samples with a bulk density of 0.78 g/cm³ were studied at pressures of 1–14 GPa using an electromagnetic method. In the coordinates D and U, the shock adiabat of pressed carbamide is linear and the shock adiabat of carbamide of bulk density at a pressure of 2.4 GPa is represented as two linear segments: D = 2U at 0.6 < U <1.3 km/sec and D = 0.6 + 1.55U at 1.3 <U < 2.8 km/sec. The possibility of a phase transition in carbamide under shock compression is discussed.