Procedure for the evaluation of the accumulation of defects in metallic structural materials under complex elastoplastic loading

Within framework of the continual fracture mechanics, we describe the engineering approach to the assessment of scattered microdamage accumulation kinetics in metallic materials under elastoplastic loading conditions in case of plane stressed state. Automatized experimental stand and the respective investigation technique are discussed. The stand has been developed based on modification of the UMé-10T electromechanic test machine. State-of-the-art computer technologies and microprocessing hardware are incorporated in the stand automation. We present the technique of experimental assessment of damage accumulation kinetics in metallic structural materials under complex elastoplastic loading conditions with account of two different fracture (cleavage and shear) processes, which technique is based on measuring the specific electric resistance of the specimen. __________ Translated from Problemy Prochnosti, No. 1, pp. 128–137, January–February, 2006.     

Photodegradation mechanism and stabilization of polyphenylene oxide and rigid‐rod polymers

Poly(2,4‐dimethyl‐1,4‐phenylene oxide) (PPO), poly(benzo[1,2‐d:5,4‐d′]bisoxazole‐2,6‐diyl‐1,4‐phenylene) (PBO) and poly(benzo[1,2‐d:4,5‐d′]bisthiazole‐2,6‐diyl‐1,4‐phenylene) (PBZT), which are polymers with extended conjugated structures, undergo a self‐sensitized photo‐induced electron‐transfer reaction. A second component is not required. This article presents many similar observations on these polymers when they are exposed to light and evidence to support the proposed photo‐induced electron‐transfer mechanism. Methods to stabilize these polymers against photo‐oxidation are also described. Workers investigating other conjugated polymeric systems may find the experimental methods, observations and polymer stabilization approaches discussed in this review useful. Copyright © 2005 Society of Chemical Industry     

非金属夹杂物对硬线盘条拉拔性能的影响及其工艺控制

分析了非金属夹杂物对硬线盘条拉拔性能的影响及其来源 ,通过考察分析冶炼、浇注生产工艺针对非金属夹杂物含量的影响 ,提出了避免或减少非金属夹杂物含量的工艺控制方法。     

短脉冲激光与岩石相互作用机理初探

石油开采过程中，为增大原始岩体的渗流速度，一般采用水压致裂或射孔弹的方法来加以实现，但两种方法都存在一定缺陷。为探索一种新概念石油开采技术，即采用激光技术增大原始岩体的渗透率，对短脉冲激光辐照自然、饱水和饱油状态的花岗岩、大理岩和红砂岩的响应作了初步研究。得到了激光辐照下，岩石试样内烧蚀坑的三维形态以及烧蚀状态与脉冲数的初步关系。结果表明：脉冲激光可以在试样局部产生一定的裂纹；饱油试样的烧蚀情况较饱水和自然状态更严重。但对于产生的裂纹数量，尺寸以及方向等方面的控制尚需进一步的工作。     

连续式棒线材轧机孔型系统的选择

论述了连续式棒线材轧机孔型系统的种类和特点，介绍了粗轧机组和中轧机组孔型系统的选择原则和方法。     

Short cue presentations encourage advance task preparation: A recipe to diminish the residual switch cost.

In the task-switching literature, it has frequently been demonstrated that although advance task preparation reduces the switch cost, it never really eliminates the switch cost. This remaining residual switch cost received much attention, and it has been argued that advance preparation is restricted in nature. In the present study, the role of task-cue presentation in the establishment of the residual switch cost was investigated. In 4 experiments, the cue was removed during the preparation interval, and it was hypothesized that this would encourage participants to complete advance task preparation. The results of all 4 experiments provided support for this hypothesis: When the cue was presented for a short time and then removed, the residual switch cost completely disappeared. This was found for different cue types. Furthermore, Experiment 3 demonstrated that it was not the presence of the cue itself but merely differences in advance task preparation that caused the effects. This suggests that advance task preparation is not as restricted in nature as previously assumed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

不连续增强镁基复合材料的界面行为

综述了近年来国内外关于Ａｌ２Ｏ３短纤维、ＳｉＣ晶须、ＳｉＣ颗粒、Ｂ４Ｃ颗粒增强镁基复合材料的界面结构及其对复合材料性能影响的研究进展，并对今后的研究提出了一些看法。     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

10Gbit/s甚短距离传输系统接收模块研究

本文研究了符合OIF—VSR4—01．0规范的甚短距离（VSR）并行光传输系统转换器集成电路，实现了接收部分转换器集成电路中帧同步、8B／10B解码、12路通道去斜移、检错纠错等模块的设计。在Altera的Stratix GX系列的FPGA上实现了接收部分转换器集成电路。仿真分析的结果表明所设计的各个模块能正确的实现接收部分转换器集成电路的功能，给出了仿真结果。