Diagnostics and monitoring of complex production processes using measurement of vibration-acoustic signals

A vibration-acoustic method for diagnostics and monitoring of production processes such as cutting metals makes it possible compared with other methods to reduce the requirement for measuring equipment and it provides a computer representation of the results observed. The set of equipment suggested has low cost and it exhibits considerable flexibility compared with existing equipment. __________ Translated from Izmeritel’naya Tekhnika, No. 7, pp. 30–34, July, 2006.     

RSFM网络及其在信号滤波中的应用

介绍了一种适用于模式识别的新型神经网络模型--局部有监督特征映射（Reglonal Supervised Feature Mapping,RSFM）网络,描述了该网络的拓扑结构和学习算法,研究了网络的基本性能,最后将其应用到了信号滤波中.理论研究和仿真实验表明,该网络结构简单、算法简洁,收敛速度快、识别精度高,适用于需要大样本训练、随机干扰严重的复杂模式的分类与识别.     

Application of condition-based HRA method for a manual actuation of the safety features in a nuclear power Plant

A practical approach to develop a more realistic fault-tree model with a consideration of various conditions endured by a human operator is proposed. In safety-critical systems, the generation failure of an actuation signal is caused by the concurrent failures of the automated systems and an operator action. These two sources of safety signals are complicatedly correlated. The failures of sensors or automated systems will cause a lack of necessary information for a human operator and result in error-forcing contexts such as the loss of corresponding alarms and indications. It is well known that the error-forcing contexts largely affect the operator's performance. An automated system which consists of multiple processing channels and complex components is also affected by the availability of the sensors. This paper proposes a condition-based human reliability assessment (CBHRA) method in order to address these complicated conditions in a practical way. We apply the CBHRA method to the manual actuation of the safety features such as a reactor trip and auxiliary feedwater actuation in Korean Standard Nuclear Power Plants. Even the human error probability of each given condition is simply assumed, the application results prove that the CBHRA effectively accommodates the complicated error-forcing contexts into the fault trees.     

发射机脉冲调制器的探讨

针对雷达发射机调试实践中存在的调制器脉冲波形问题，对磁控管发射机常采用的刚性调制器脉冲波形影响雷达性能及发射机可靠性的情况进行了分析与探讨，并结合实际，提出了调制器脉冲波形的改善途径及解决办法。     

井口信号无线数传系统

目的　介绍了井口信号无线数传系统的设计 .方法　无线数传、低功耗电路设计 .结果　省去了井口信号线 ,降低了井口工作量 .结论　提高了测量精度和可靠性     

TBM地区低孔渗高产气储层预测

 本文从TBM地区目的层的地质和地球物理特征分析出发，以三维地震资料为基础，综合利用人工和神经网络波形分类等定性储层预测方法和利用反演及敏感地震属性分析，对TBM地区低孔渗砂岩分布区开展了砂体展布特征分析和天然气高产区预测研究。根据研究结果部署了10口钻井，已完钻的4口井中有3口获得高产气流（其中DK27井日产天然气36.8×10⁴m³）。值得指出的是，目前所用的预测方法还不能预测厚度小于6m的单砂层或砂层组构成的储层。     

智能钻井电缆信号传输的研究现状及难点

目前，钻井中井下检测信号的传输主要运用泥浆脉冲、电磁波等方式。随着井深的增加、复杂结构井和欠平衡井的增多以及对传输速度要求的提高，电缆信号传输必然是今后智能钻井的发展方向。通过对半个多世纪来各类电缆信号传输的设计进行归类，详细介绍了其设计原理，提出了电缆信号传输设计的基本要求与难点。     

利用Hilbert-Huang变换提取地震信号瞬时参数

 通过Hilbert变换求取的信号瞬时参数并非对任何信号都有物理意义，此法通常要求被分析信号是窄带或平稳的，而且对噪声很敏感。而实际地震信号既非平稳又含有噪声，若在实际应用中不加考虑地对地震信号进行Hilbert变换以求取瞬时参数，这种情况下求取的瞬时参数将缺乏物理意义甚至失真。Hilbert-Huang变换是一种新的分析非平稳非线性信号的方法，它先将信号进行经验模态分解（EMD），形成有限个固有模态函数（IMF）之和，再对固有模态函数作Hilbert变换求取时频谱，求取的时频谱在时域和频域都具有较高的分辨率。本文将Hilbert-Huang变换应用于地震瞬时参数的提取，实例表明，对地震剖面做EMD可以得到不同时间尺度上的特征，Hilbert谱比传统的时频谱在时间和频率域上的分辨率都要高，强反射层在第1阶IMF瞬时频率剖面上比原瞬时频率剖面上表现得更为明显。     

The mirror effect and mixture signal detection theory.

The mirror effect for word frequency refers to the finding that low-frequency words have higher hit rates and lower false alarm rates than high-frequency words. This result is typically interpreted in terms of conventional signal detection theory (SDT), in which case it indicates that the order of the underlying old item distributions mirrors the order of the new item distributions. However, when viewed in terms of a mixture version of SDT, the order of hits and false alarms does not necessarily imply the same order in the underlying distributions because of possible effects of mixing. A reversal in underlying distributions did not appear for fits of mixture SDT models to data from 4 experiments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

双谱估计在导引头信号检测与处理中的应用

双谱估计是一种应用广泛的高阶谱估计。将双谱估计应用于超宽带导引头信号检测与处理系统中,为导引头信号处理中的平滑和滤波增添了一种新的方法。仿真结果表明该方法是有效的。