Sodium citrate-assisted synthesis of nano-manganese oxide on carbon fiber for enhancing the mechanical and frictional performances of carbon fiber-reinforced resin matrix composites

Aiming to enhance the carbon fiber (CF)/resin interfacial adhesion, this report describes the novel application of sodium citrate (SC) as an auxiliary reducing agent and surface regulator to control the morphology of nano-manganese dioxide (MnO₂) on the CF surface. The composites were fabricated by means of controlling the molar concentration ratio of SC to Mn source (0:1, 1:3, 1:2, and 1:1) in hydrothermal synthesis. The results reveal that MnO₂ nanosheets on the CF surface become denser as the concentration of SC is 1/3 of Mn source, which makes advance to the surface roughness and surface energy of CF. Simultaneously, the tensile strength of as-prepared composite is increased by 52.8%. The homologous friction coefficient tends to be high and stable and the wear volume is significantly reduced by 63.8 and 26.5% under the applied loads of 3 and 5 N in contrast with the original composites prepared without SC. As a result, it can be inferred that SC plays a crucial role in enhancing the interfacial bonding strength between the CF and matrix, providing insights into the interface control of CF-reinforced resin matrix composites.     

Improvements of the structural,thermal, and mechanical properties of structural adhesive with functionalized boron nitride nanoparticles

Investigations on the production and development of nanoparticle-reinforced polymer materials have been attracted attention by researchers. Various nanoparticles have been used to improve the mechanical, chemical, thermal, and physical properties of polymer matrix composites. Boron compounds come to the fore to improve the mechanical and thermal properties of polymers. In this study, mechanical, thermal, and structural properties of structural adhesive have been examined by adding nano hexagonal boron nitride (h-BN) to epoxy matrix at different percentages (0.5, 1, 2, 3, 4, and 5%). For this purpose, nano h-BN particles were functionalized with 3-aminopropyltriethoxysilane (APTES) to disperse the h-BN nanoparticles homogeneously in epoxy matrix and to form a strong bond at the matrix interface. Two-component structural epoxy adhesive was modified by using functionalized h-BN nanoparticles. The structural and thermal properties of the modified adhesives were investigated by scanning electron microscopy and energy dispersion X-ray spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis techniques. Tensile test and dynamic mechanical analysis were performed to determine the mechanical properties of the adhesives. When the results obtained from analysis were examined, it was seen that the nano h-BN particles functionalized with APTES were homogeneously dispersed in the epoxy matrix and formed a strong bond. In addition that, it was concluded from the experimental results that the thermal and mechanical properties of adhesives were improved by adding functionalized nano h-BN particles into epoxy at different ratios.     

Synthesis and evaluating of carbon nanoallotrope-biomacromolecule gel composites as drug delivery systems

This work was done to assess the role of precursors (agro and graphite) on performance of carbon nanoallotropes-biomacromolecules composite as drug delivery for controlling the release of niacin. In this respect graphene oxide and bagasse-based carbon oxide were synthesized and chelated with chitosan (Cs-GO and Cs-Co). These gel composites were characterized by many techniques [morphology, differential scanning calorimetry, Fourier-transform infrared spectroscopy, swelling, encapsulation efficiency (EE) and loading (L) % of niacin. Another series of experiments was carried out for studying the role of replacing part of carbon nanoallotrope by carboxymethyl cellulose (CMC) on performance of produced drug carries, these systems were coded as Cs-GO-CMC and Cs-Co-CMC. The data showed that, the Cs-GO gel composite provided maximum release of NA, at 5 h, for pH's simulated gastric and intestinal fluids; pH. 2.1 and pH 7.4 (1120 mg/L and 757 mg/L). The incorporation of CMC is not acceptable as it provided low drug release together with burst release of NA-drug, and consequently possible caused tissue irritation or toxicity in the human body. The Cs-GO and Cs-CO systems with relatively low drug loading were recommended for their better controllability system to NA release, which prolonging benefit of human with niacin. The NA release from all investigated gels followed Fickian and non-Fickian diffusion mechanisms.     

Effect of modified layered double hydroxide on the flammability of intumescent flame retardant PP nanocomposites

The dodecyl sulfate intercalated CaMgAl-hydrotalcites (layered double hydroxides [LDHs]) were successfully prepared by co-precipitation method, and characterized by X-ray diffraction analysis, infrared spectroscopy (Fourier transform infrared spectra [FT-IR]), thermogravimetry (TG-DTA), scanning electron microscope, and Brunner−Emmet−Teller (BET). The prepared LDHs were added to the intumescent flame retardant (IFR) polypropylene (PP) nanocomposites, and the limiting oxygen index method (LOI), vertical combustion method (UL-94), cone calorimetry (CCT), and other test methods were used to study its thermal stability and combustion performance. The results showed that when the flame retardant was composed of 23 wt% IFR and 2 wt% O-SDS-LDHs, the LOI value of the material was increased to 31.5%, reaching the V-0 level, and the flame retardant performance was significantly improved. The results also showed that there was a significant synergistic effect between IFR and O-SDS-LDHs, which could improve the thermal stability and graphitization degree of PP nanocomposites. In addition, the peak heat release rate, total heat release, and total smoke production of the PP/IFR/O-SDS-LDHs system were 177 kW/m², 101 MJ/m², and 15.4 m², respectively, which were 82.2%, 51.0%, and 23.0% lower than those of pure PP, respectively. These improvements could be attributed to the presence of dense and continuous char layer formed by the synergistic effect.     

Removal behavior and mechanism of silver from low concentration wastewater using cellulose aerogel modified by thiosemicarbazide

Due to the low concentration of silver in water, most of the cellulose adsorbents exhibited low removal efficiency, which greatly limited their practical applications. Herein, a cellulose aerogel modified by thiosemicarbamide (CAT) was fabricated for reducing and adsorbing silver ions from low concentration wastewater. The characterization results concluded that CAT owned a three-dimensional spongy structure with many circular microspheres and a better specific surface area (19.37 m² g⁻¹), as well as the functional groups of ─C═N⁺─H and ─(C═S)─N. The static batch adsorption experiments demonstrated that CAT could reached the maximum removal percentage of 94.94% and adsorption capacity of 42.12 mg g⁻¹ under the initial concentration of Ag(I) was 15 mg L⁻¹ and the pH value was 7. Meanwhile, the adsorption of Ag(I) on CAT was second-order reaction, and the Langmuir model could better fit the adsorption process. In addition, CAT exhibited wide pH values (1–9) adaptability and excellent adsorption performance for silver through electrostatic interaction, chelation, and reduction. This study probably provides a new method as well as important experimental data and theoretical reference for the removal of silver ions and other metals.     

Influence of deposited amine-functionalized Si-MCM-41 in polyacrylonitrile electrospun membranes applied for separation of water in oil emulsions

Among several oil/water emulsion separation technologies, the utilization of nanoparticle-decorated membranes with diverse functionalities has received considerable attention in recent years, particularly if the antifouling capacity can be improved. In this article, we propose a new membrane based on surface-hydrolyzed polyacrylonitrile electrospun membranes and/or decorated with amine-functionalized Si-MCM-41 nanoparticles to be used as oil/water emulsion separation treatment and to determine their antifouling ability. X-Ray photoelectron spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy, and toluidine blue O assay, scanning electron microscopy, contact angle measurements for oil under water and thermogravimetry were used for characterizing the membranes and an assay of permeability was developed to quantify the diffusion of oil molecules across the electrospun membrane. The electrospun and/or decorated membranes showed an underwater oleophobic wettability, which can separate oil-in-water emulsions with 87% separation efficiency, results of fouling experiments, evaluated in terms of rejection and flux recovery ratio, exhibited good antifouling ability, but the membrane decoration process did not lead to superior outcomes compared with undecorated membranes.     

直流电弧等离子体法制备超细Ag粉研究

采用自行研制的高真空双枪直流电弧金属纳米粉连续制备设备,制备了高纯度的超细银粉,并采用正交试验的方法研究了各工艺参数对粉体产率及粒径分布的影响。利用X射线衍射（XRD）、透射电子显微镜（TEM）和相应选区电子衍射（SAED）以及Simple PCI软件对样品的成分、形貌、晶体结构和粒径分布进行了分析。结果表明：所得银粉纯净无污染,属多晶型结构,平均粒径在38-220nm范围内,粒径分布窄;最大产率比同类研究结果提高了近17倍;电流和充气压力分别是影响产率和粒径分布的显著性因素。     

MECHANICAL PROPERTIES AND MICROSTRUCTURES OF Al-Mg-Li-Zr ALLOYS-CONTAINING SILVER

ＭＥＣＨＡＮＩＣＡＬＰＲＯＰＥＲＴＩＥＳＡＮＤＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＯＦＡｌ－Ｍｇ－Ｌｉ－ＺｒＡＬＬＯＹＳ－ＣＯＮＴＡＩＮＩＮＧＳＩＬＶＥＲ￥Ｚｈａｎｇ，Ｓｉｑｉ；Ｙｉｎ，Ｚｈｉｍｉｎ；Ｓｈｅｎ，Ｊｉａｎ；Ｌｕ，Ｂｉｎ；Ｌｉａｎｇ，Ｙｉｎｇ（...     

PREPARATION OF SILVER POWDER FOR CONDUCTIVE PASTE

ＰＲＥＰＡＲＡＴＩＯＮＯＦＳＩＬＶＥＲＰＯＷＤＥＲＦＯＲＣＯＮＤＵＣＴＩＶＥＰＡＳＴＥＣｈａｉ，Ｌｉｙｕａｎ；Ｚｈｏｎｇ，Ｈａｉｙｕｎ；Ｗｕ，Ｈｕｉｙｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＮｏｎｆｅｒｒｏｕｓＭｅｔａｌｌｕｒｇｙ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎ...     

AgNO3浓度对SPE电极镀覆纳米Ag的影响

采用浸渍还原法(I-R法)在Nafion离子膜上镀覆纳米Ag,并就AgNO3浓度对SPE电极镀覆纳米银的影响作了研究.研究表明采用I-R法可制得细致Ag镀层,有效增加Ag的分散度及电极的真实面积.在还原剂浓度为0.1mol·L-1,浸渍还原温度均为50℃及浸渍还原时间分别为40 min,60 min的条件下,调节浸渍液AgNO3浓度至3.5 mmol·L-1时,可获得致密、均匀的纳米级Ag/SPE电极.同时验证砂纸糙化的预处理有利于增加Ag的负载和附着力,有利于提高Ag催化层的有效面积.