W‐band physical layer design issues in the context of the DAVID–DCE experiment

This paper aims at focusing on the aspects concerning the physical layer design for an innovative satellite communication experiment. Such an experiment, denoted by the acronym DAVID–DCE (Data and Video Interactive Distribution—Data Collection Experiment) is based on the exploitation of the W‐band (75–110 GHz) for high‐bit‐rate satellite transmission. The potential advantages of using of the W‐band are mainly related to the great bandwidth availability, and to the absence of interference. Moreover, an expected result of the experiment is a substantive improvement in the communication system's performances in the presence of meteorological phenomena (e.g. rain) as compared with the more conventional Ka‐band satellite transmission. On the other hand, problems to be faced concern the non‐ideal behaviours of hardware devices employed for high‐frequency digital transmission. In particular, carrier recovery and timing recovery are the most crucial signal‐processing tasks to be carefully considered in the design of the physical level of the system, because they considerably suffer from hardware impairments. The purpose of this work is to illustrate the proposed solutions in terms of the most critical modulation, demodulation and synchronization design issues, together with the effects of non‐ideal behaviours of hardware components on BER performances. Copyright © 2004 John Wiley & Sons, Ltd.     

Simulation by Slepian method of plastic displacements of Gaussian process excited multistory shear frame

The object of study is a stationary Gaussian white noise excited multi-degree-of-freedom (MDOF) linear elastic, ideal plastic, linearly damped, statically determinate oscillator with several potential elements of ideal plastic yielding. Specifically the study is exemplified for a plane multistory shear frame with rigid traverses where all the connecting columns except the columns in one or more of the bottom floors have finite symmetrical yield limits. The white noise excitation acts on the mass of the first floor making the movement of the elastic bottom floors simulate a ground motion that interacts with the structure above the bottom floors. The method of study is so-called Slepian model simulation and is in principle the same for other statically determinate MDOF elasto-plastic oscillators of the considered type. The method is fast as compared to direct simulation and provides results that give good insight in the behavior of the plastic displacement response process.     

铝型材推弯工艺

通过铝型材圆环的推弯实验,研究了推弯工艺原理、变形过程,结合有限元模拟得到了和实验结果相吻合的型材厚度分布、成形零件卸载回弹后的曲率半径及型材截面畸变.结果表明:推弯零件曲率及截面畸变一致性高,成形模具结构简单且便于调整,数值模拟可以用于推弯工艺的优化分析.     

Numerical Filling Simulation of Injection Molding Using Three-Dimensional Model

1 Introduction During injection moulding, the rheological response of polymer melts is generally non-Newtonian and nonisothermal with the position of the moving flow front. Because of these inherent factors, it is difficult to analyze the filling process. Therefore, simplifications usually are used. For example, in middle-plane technique and dual domain technique [1], because the most injection molded parts have the characteristic of being thin but generally of complex shape, the Hele-Shaw …     

管壳式换热器流场三维数值模拟

采用多孔介质方法 ,在PHOENICS 3 3程序的基础上建立了换热器的三维流动计算模型。引入体积穿透率、表面穿透率、分布阻力等来描述换热器内的管束。模型通过计算Halle等[1] 的实验工况来进行验证 ,并尝试用于计算 2 0 0MW低温供热堆主换热器内的流场     

随机模拟在电信网性能评价中的应用

本文介绍了可在微机上实现大规模电信网践模拟的实用化软件ＳＩＭＵＮＥＴ，及基所采用的无时钟事件追踪法。该软件可用规划中的电信网络和实际网路的模拟及性能评价，也可用于不同流量控制算法的评价。文中给出一个评价实例。     

采用活性非均匀分布催化剂中变反应器的模拟计算

模拟计算表明:采用活性趋于表层的分布,可以较明显地提高国产中温变换催化剂的内表面利用率,有效地节省催化剂用量,而对“热点”温度没有多大影响。     

台阶形陆架上孤立波传播的数值模拟

为了研究孤立波在带有陡升台地的陆架上的传播,用MAC方法求解了二维纳维尔-斯托克斯方程。本文在以下几点,改进了东京大学提出的修正的网格标记法:1.给出交错网格的新的标号系统;2.推导出自由表面上非规则星的新的压力迭代公式;3.对流函数、压力和速度使用了三值悬旗;4.把一维Burgers方程的部分守恒形式扩展用于二维N-S方程。这些使得程序更简单和精确。计算结果证卖,物理上很好地解释了孤立波的传播,入射波分成了反射波和透射波,然后开始分裂、破碎。 本文计算结果与线性波理论的结果很一致,但后者不能给出波运动的过程。     

碾压混凝土坝施工进度与质量控制的新措施

碾压混凝土重力坝和拱坝由于连续施工的坝体混凝土体积大，施工期间需要采取较为严格的温度控制措施，而所采取的温控措施是否有效，目前尚没有一个能够用于实际施工过程的快速有效的评估方法和方式，不能根据已施工坝体内的实际情况来控制施工进度和质量。利用分布式光纤温度测量系统来快速地获得坝体混凝土内部的大量温度信息，进而实际标定温度仿真程序并通过标定过程模拟拟施工的连续碾压层，以检验其温控措施的有效性。通过坝体内部的温度、温度变化速率和梯度来达到实时控制坝体碾压上升速度、坝面和仓面养护、以及冷缝灌浆处理等目的。     

Energy and comfort: A new type for TRNSYS

Two subroutines have been developed which permit users of the TRNSYS programme to calculate the parameters of ambiental comfort (PMV and PPD).The first subroutine deals with the calculation of the view factors inside a room for all the values of the spatial coordinates and, thus, permits the average radiant temperature to be calculated in every position. The second subroutine has been developed in accordance with the indications of the ISO 7730 standard.Both subroutines have been validated and then interfaced to TRNSYS.The integrated programme has been utilised to compare the performances of different heating systems in terms of energy consumption and comfort, maintaining the temperature of the interior constant for different climatic conditions.