Scaling laws and internal structure for characterizing electrospun poly[(R)-3-hydroxybutyrate] fibers

Using chloroform/dimethylformamide (CF/DMF) co-solvent, electrospinning of poly[(R)-3-hydroxybutyrate] (PHB) solutions was carried out at ambient temperature. The effects of the applied voltage (V), flow-rate (Q), and solution viscoelastic properties on the Taylor cone, electrified jet, and fiber morphology were investigated. In addition, the electric field developed by the needle-plate electrode configuration was calculated using a finite element analysis to reveal the tip-to-collector (H) effect. Among the processing parameters (V, Q and H), it was found that Q played a key role in determining the jet diameter (d_j) and electrospun fiber diameter (d_f), and scaling laws existed between them, i.e., d_j-Q^0.61 and d_f-Q^0.33. The diameter reduction ratios of D_o/d_j (D_o is the needle diameter) and d_j/d_f were measured as 50-120 and 5-10, respectively; it suggested that major jet stretching took place in the straight electrified jet region, and further chain orientation could be gained by the subsequent process of jet whipping. By changing PHB concentrations from 5 to 15 wt%, the solution viscosity (η_o) was increased from 100 to 4900 cP, whereas the surface tension and solution conductivity remained unchanged; it provided a good model solution to exclusively reveal the η_o effect on the electrospinning process. Our results showed that the η_o-dependence of d_j and d_f also followed simple scaling laws: d_j-η_o^0.06, and d_f-η_o^0.39, with a prefactor depending on the processing variables, mainly the flow-rate. Regardless of the PHB concentrations used, the obtained PHB fibers showed a similar crystallinity fraction of ca. 0.63 and possession of major α-crystals together with a small amount of β-crystals with zigzag chain conformation.     

单相负载三相供电功率分配之PLC改造实践

介绍了单相负载一工频感应炉供电的S7-200CPU224改造实践方案.依托原有设备条件,三相功率分配同样设计采用电容、电抗进行调节,起、停及三相电流平衡控制由晶闸管 接触器形式替代原单纯采用接触器控制,有效值测量使用有别于FFT的检测算法.运行实践表明:节能降耗明显,设备故障率大幅降低,具有良好的推广应用价值.     

首钢2号高炉的技术进步

介绍首钢2号高炉大修采用的新技术、开炉操作和投产以来的生产情况。     

薄层隔热保温涂料的研制及应用

常规保温材料的研究以提高孔隙率、提高热阻、降低传导传热性能为主,但其对流传热及辐射传热较难降低。当今以传热机理改进保温材料及保温结构是重要发展方向。文章介绍了一种借鉴国外航天工业用高科技绝热涂层的技术思路,并结合国情研制成功的具有高辐射率的薄层隔热保温涂料,它可弥补常规保温材料的不足。该保温涂料以液态涂料方式存在,干燥后的涂层热阻较大,特别是热反射率高,可有效地降低辐射传热,施工方便,涂层薄,无接缝,附着力好,集防水隔热外护于一体。绝热等级为R21.1,热反射度0.79,热辐射率0.83,固含量54％,性能接近国外同类产品水平,成本仅为国外产品的1/4左右。可直接以涂层方式使用,也可与其他多孔保温材料复合构成低辐射传热结构,作为石油石化行业成品油罐及储罐的隔热保温、管道及设备的保冷及屋面隔热保温涂层使用,综合节能效益高。     

含-NCO双组分水性木器漆的应用研究

介绍了以-NCO交联的双组分水性木器漆常用的树脂、固化剂类型，对其在木器涂装过程中的施工时限、泡沫控制等影响生产应用的因素进行了分析研究，并提出了一些解决方案。     

成品油储罐内的腐蚀及防护

对成品油储罐内各部位腐蚀情况进行了介绍，说明了产生腐蚀的原因和腐蚀机理。介绍了油罐内防护技术，采用节点加固，降低边缘应力，可减缓油罐金属腐蚀速度；对选用油罐内防腐涂料的原则进行了阐述。     

我国制造业国有企业的现状与发展

制造业国有企业在我国国民经济中具有非常重要的地位,其发展状况因所处地区、行业的不同而存在很大差别。从总体上看,制造业国有企业在投入产出能力、企业运营能力、盈利能力和偿债能力等方面都有待于提高。制造业中大型国有企业保持了良好增长态势。国家重点企业通过增加研究与开发投入,发展后劲显著增强。制造业中国有企业的数量在大幅度减少,其所占的比重持续下降,在制造业的不少小行业中,非国有企业已经取代了国有企业,成为行业中的主要力量。     

电话防盗报警器

详细介绍了电话通讯技术以及安全报警技术的应用，二者如何有效地结合起来形成综合联网报警系统。分析了HT9200A和MT8870DC的电路结构，及与AT89C51的接口电路。     

Determination of the content of wax esters in some sea foods and their molecular composition. A comparison with ω-3 enriched wax esters

Wax esters enriched in ω-3 fatty acids have been recently shown to be readily absorbed by rats after dietary supplementation. Wax esters are less prone to oxidation and can be better formulated than liquid ω-3 derivatives. All these characteristics suggest a possible use of wax esters enriched in ω-3 as food supplements. However, some naturally occurring wax esters are defined as scarcely digestible (jojoba oil, spermaceti). On the other hand, wax esters have been found in several sources of marine origin, which can enter normal foodstuff. In order to better understand the digestibility of wax esters, we have analysed some foods from marine sources. The content of triglycerides and wax esters of the foods has been determined. Moreover, wax esters have been analysed for their composition in alcohols and fatty acids. Wax esters have been shown to be a part of the neutral lipid extract of the foods analysed. Their content, if compared with the content in triglycerides, shows striking differences. In the case of two botargo preparations, it has been shown that wax esters are more than 90% of the total neutral lipid extract. The content of fatty acids and alcohols found in the foods analysed is consistent with published data.