Treatment of methanol wastewater with two-stage and two-phase anaerobic process

The two-stage and two-phase anaerobic process (TSTP) composed of hydrolytic acidification reactor,first-order and second-order external circulation anaerobic reactors (EC) was taken to treat methanol wastewater. Test results show that TSTP process is quick start-up in 51 d, and the maximum VFA of hydrolytic acidification reactor effluent reaches 876 mg/L. Under the condition of volume loading of 6.56 kgCOD/m3·d, COD removal rate of the first-order EC reactor is about 85%, and under the condition of volume loading of 1.02 kgCOD/m3·d, COD removal rate of the second-order EC reactor is about 50%. When the inflow COD of TSTP process is between 7000-11000 mg/L, its effluent COD is lower than 600 mg/L. In the biological conversion process of methanol into methane,the production of acetic acids as an intermediate product can be ignored and the direct production of methane from methanol is predominant.     

生物地耕法降解含油污泥的研究

对含油质量分数为9.0%和10.2%的油泥进行生物地耕法的研究。结果表明,生物降解120d后,油泥残油质量分数分别由9.0%和10.2%降至3.1%和4.0%,石油降解率分别为65.6%和60.8%;同时利用气相色谱-质谱分析生物降解前后含油污泥中饱和烃的组分和质量分数变化,含油质量分数为9.0%和10.2%油泥中的长链烷烃分别减少39.8%和42.2%。     

功能微生物对炼厂剩余污泥减量化效果的研究

研究了投加酵母菌群、光合细菌群和混合菌群等多功能微生物菌群促进炼厂的剩余污泥的减量化效果。通过多次污泥减量试验,观察到在好氧消化基础上投加功能菌群能显著促进炼厂剩余污泥减量化。结果表明,与仅好氧曝气条件下相比,投加酵母菌群、光合细菌群、混合菌群的MLSS去除率明显提高了13.81%、30.58%、37.94%;投加功能菌群作用后的污泥沉降性能均优于投加前;pH值均逐渐降低。功能微生物降解效应使石油组分发生明显的变化,强化了对低中碳正构烷烃的降解程度,有利于将高碳链烃降解为低碳链烃。     

A/O生物除磷工艺丝状菌膨胀的控制

为了有效控制A/O生物除磷工艺处理化粪池污水时产生的丝状菌膨胀,先后采取改变系统的COD污泥负荷(NCOD)、溶解氧(DO)的质量浓度和降低S2-的质量浓度等措施,最终使A/O除磷工艺丝状菌膨胀得到了控制,污泥沉降性能得到了有效恢复.研究结果表明:A/O除磷工艺在高NCOD条件下运行时,容易发生严重的丝状菌膨胀现象,原因是COD在厌氧区降解后仍有较高的剩余量进入好氧区,导致聚磷菌在和丝状菌的竞争中优势变弱;在低NCOD条件下运行时,由于原水中硫化物含量过高导致丝状硫细菌增殖,因此仍然存在轻度的丝状菌膨胀现象.     

Development of a novel modified EGSB reactor for municipal sewage treatment at ambient temperatures

A novel modified expanded granular sludge bed(EGSBm) reactor was developed for anaerobic treatment of municipal sewage with mixed liquid recirculation instead of effluent recirculation commonly adopted by a conventional EGSB(EGSBc) reactor.Performances of these two reactors were compared in treating municipal sewage at ambient temperatures ranging from 8 to 26 ℃.At an upflow liquid velocity(Vup) of 10.3 m/h,the mean concentrations of filtrated COD(CODfilt) and COD of the EGSBm effluent were determined to be 59.4 and 95.9 mg/L,respectively,which were significantly lower than those of the EGSBc effluent operated under identical experimental conditions.When the organic loading rate was suddenly increased from 1.2 to 7.2 kg COD/(m3·d),the EGSBm regained the removal efficiency of previous operation phase in 10 d.Hydrodynamic characteristics of the reactors were compared using the residence time distribution(RTD) model.It was found that the treatment efficiency of EGSBm kept increasing as the Vup increased.The polymerase Chain Reaction-Denaturing Gradient Gel Electrophoresis(PCR-DGGE) technique was used to analyze the microbial diversity in EGSBm.Fingerprinting pattern indicated that some species in the inoculating sludge were still reserved in the granular sludge of EGSBm,moreover,several new species occurred.     

直接热化学液化法污泥制油技术研究进展

阐述了国内外利用直接热化学液化法处理污泥的研究进展和应用前景,并介绍了将其转化为油的典型液化工艺及其影响油产量的主要因素,阐明此种方法的发展趋势,并指出资源化利用和能源回收应该是今后污泥处置的方向．     

污泥吸附动力学与平衡模型的实验研究

采用好氧和厌氧污泥进行污泥的生物吸附实验,研究好氧与厌氧污泥吸附动力学和吸附平衡模型。研究表明:好氧和厌氧污泥的吸附过程中,颗粒内扩散是污泥吸附的主要限速阶段,但它不是唯一的限速因素。好氧和厌氧污泥的假二级反应模型比一级、二级反应模型更能描述污泥的吸附过程。Langmuir和Freundlich的吸附平衡方程都适合描述厌氧和好氧污泥的吸附平衡过程。     

生物造粒流化床中颗粒污泥的物理性质及破碎与恢复特性研究

通过两套生物造粒流化床试验装置的并联和串联运行,运用摄影与图像分析、颗粒静沉和密度分析等方法,研究了流化床中颗粒污泥的物理性质及破碎与恢复特性.在作为一级柱(接受人工配置污水)运行的过程中,流化床主要经历了颗粒成长;在作为二级柱(接受一级柱出水)运行的过程中,流化床主要经历了颗粒破碎.试验结果表明,在多次轮回切换工作的过程中,流化床中的颗粒污泥具有动态稳定性,破碎的颗粒很容易得到恢复.颗粒污泥的有效密度随粒径而变化的趋势不明显,粒径-密度关系在双对数坐标图上始终处于同一领域,且远高于常规絮凝体的密度,表明流化床中形成的颗粒污泥具有密实的构造.     

厌氧附着膜膨胀床处理生活废水的研究

文章利用厌氧附着膜膨胀床（AAFEB）反应器处理生活废水。选择合适的活性污泥和活性炭载体,在60d内反应器启动挂膜完成。实验表明,此反应器能够有效的去除生活废水中的有机物,出水水质良好,反应器运行稳定。通过稳定床层膨胀率在10％-20％,研究水力停留时间（HRT）和温度对CODCr去除率的影响,得到该反应器的最佳工艺条件为,HRT8h,温度控制在28℃,在此工艺条件下,CODCr的去除率在85％以上,BOD5的去除率在73％以上,且SS的去除率在75％以上。     

同步产电及废水处理AFB-MFC电极研究

为了考察电极因素对微生物燃料电池产电及废水处理性能的影响,设计了一种新型厌氧流化床微生物燃料电池(AFB-MFC).研究了不同阴极电极材料,阴极与阳极面积以及阴极底边与阴极室底部距离对AFB-MFC产电及废水处理性能的影响.所有实验在阴极室曝气量为16～24 L/h、回流量为10.7 L/h、进水流量为0.6 L/h、外电阻为250 Ω以及进水COD浓度为3000.98～3789.44 mg/L下进行.结果表明,在尺寸大小均为15.0 cm×3.5cm的碳纸、铜板、铝板、镀锌铁板及铁板中,使用碳纸作阴极电极时AFB-MFC产电性能最好;阴极底边与阴极室底部的最佳距离为17.3～20.3 cm;使用面积为308.8、232.0、160.0和76.8 cm2的碳纸作阳极电极及面积为241.5、210.0、175.0和105.0 cm2碳纸作阴极时,阳极及阴极最佳面积分别为160.0和210.0 cm2.AFB-MFC系统最佳运行条件下COD的去除率维持在约80.00%.放大型AFB-MFC系统有利于今后工程实际应用.