连续法生产冷库板用组合聚醚的研制

针对国内板材厂家提出用连续法生产厚度在150 mm以上冷库板的要求,通过对聚醚体系、催化体系、发泡体系等进行调整,得到了适合于连续法生产厚度在150 mm以上冷库板的组合料,并成功地用于200 mm厚冷库板的连续化生产,未出现烧心开裂、变形等问题.     

CdTe-CdS solar cells — Production in a new baseline and investigation of material properties

In this paper, we describe our new baseline for CSS-CdTe-CdS solar cells on 10 × 10 cm² substrates. The deposition of the p-n junction and all the following steps were performed at the Institut für Festkörperphysik (IFK) in Jena. Using the new baseline, we are already able to produce solar cells with similar properties as commercial ones. In the batch type process, all manufacturing steps can be investigated separately. We employ Rutherford backscattering spectrometry (RBS), X-ray diffraction (XRD) and external quantum efficiency (EQE) measurements to characterise the structure of the bulk materials and interfaces. It is demonstrated that by RBS the front contact becomes accessible for thinned CdTe films. At the back contact, RBS spectra show a tellurium accumulation which is due to etching. This tellurium rich layer is confirmed by XRD with Rietveld refinement. The intermixing at the CdS-CdTe interface caused by the activation step is quantified by a bandgap determination based on EQE measurements. From the bandgap energy of the CdTe_1 − xS_x compound, we calculated the sulphur fraction x at the interface. XRD measurements imply that the activation step induces a (111) texture in CdTe. With regard to an improved manufacturing process, our cells are compared to industrial cells produced by Antec Solar Energy.     

Space-charge-limited currents for organic solar cells optimisation

Basic suppositions and microphysical origin of the occurrence of the space-charge-limited currents (SCLC) are presented in general and for the temperature-modulated space-charge-limited currents (TM-SCLC) in particular. The criteria are given for the spectroscopical method TM-SCLC to be used for localized electron states elucidation in organic semiconducting materials for organic solar cells optimization and modelling. The “visibility “of the localized states by SCLC method, i.e. the power of the SCLC method to distinguish the localized states, is tested by the modelling, varying the temperature, energy position of localized states and their concentration. Generally, it was determined that the SCLC measurements results are more reliable with the increased energy of the states, with their increased concentration and with decreased temperature. The correlation (or its absence) between the measured current and activation energy on applied voltage, expressed by the dependence of preexponential factor of conductivity on activation energy (Meyer–Neldel rule), gives the possibility to determine the energy range where the reconstruction of density of localized states function is reliable.     

Characterization of microspherical semi-transparent solar cells and modules

Microspherical solar cells and modules have been fabricated. The spherical nature of these semi-transparent devices allows the microspherical cells to harvest both directly incident and diffuse components of sunlight thereby improving the solar energy conversion efficiency. Indoor and outdoor characterizations of these three dimensional semi-transparent cells and modules are carried out using a Lambertian reflector in order to assess the maximum efficiency of the devices. In the absence of the reflector the cell efficiency is 13.5% under standard illumination (100 mW cm⁻², A.M. 1.5, 25 °C). However, this is significantly enhanced in the presence of the reflector. Microspherical modules with the reflector are directly compared to similar semi-transparent modules comprised of traditional planar devices, in outdoor tests at low light intensity (2.5–25 mW cm⁻²) to further demonstrate the benefits of the design particularly at low angle of incident radiation.     

Phase relations in the system ln-CulnS2

By DTA and x-ray diffraction the phase relations in the pseudobinary system In-CuInS₂ have been investigated. CuInS₂ hs a melting point of 1090° C and within this system there is a broad region of liquid immiscibility. A four phase invariant reaction exists at 633° C which is of the form: L₂ = L₁+ CuInS₂ + InS.     

气囊内模制作桥面板在华丰湾防洪工程中的应用

采用气囊作内模进行浇筑桥面板混凝土 ,加快了预制桥面板施工进度 ,确保工程施工质量 ,并降低了工程施工成本     

Solar ponds in alkaline lake and oil well regions

Solar ponds are probably the simplest technology available for the useful conversion of solar energy. The basic technology is proven. Solar ponds have been shown to be technically feasible and economically viable for many applications, particularly for thermal use. The electrical conversion and use of solar energy via solar ponds is still questionable, in general, for economic viability. By putting the untapped sources together in the South Plains region, it looks promising economically both for thermal and electrical conversions and applications. There are a number of alkaline lake basins randomly scattered in the South Plains region of the U.S.A. In that area, there are thousands of crude oil producing wells that produce brine in abundance. The selection of suitable alkaline lake basins as a solar pond site and as depository sites of brine from oil wells and the using of this brine and salty water from alkaline lakes makes the solar pond economically viable for both thermal and electrical demands in the area.     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

新型太阳能空调节能窗的原理与结构

基于太阳辐射的光变特性和多层薄膜材料的变色效应，分析了新型太阳能节能窗对热候，冷候和温候空调的工作原理，重点讨论了可实现外加参量的动态调节透光性的薄膜材料的性能。     

Improvement of device performances by thin interlayer in conjugated polymers/methanofullerene plastic solar cell

Recent studies have reported that a thin interlayer between poly(3, 4-ethylene dioxythiophene)-poly(styrene sulfonic acid) (PEDOT: PSS) and an emissive polymer layer leads to a large increase in the performances of polymer light-emitting diodes (PLEDs) by preventing significant quenching of the radiative excitons at the PEDOT: PSS interface; therefore, acting as an efficient exciton-blocking layer. Using the similar idea, a thin interlayer was fabricated between PEDOT: PSS and the active layer of conjugated polymers/methanofullerene composites in a plastic solar cell. The interlayer consisted of a poly(fluorene)-based hole transporter spin-coated directly on top of the PEDOT: PSS layer. The devices with the interlayer exhibited a higher efficiency than in those without the interlayer.