Modification of oxidizing activity of Thiobacillus ferroxidans by some particulate solids

Different particulate solids such as glass powder, various types of activated carbon and bentonite suspended in Thiobacillus ferrooxidans cultures produce very different effects on the oxidizing activity of the microorganism. The atmospheric oxygen uptake by Thiobacillus ferrooxidans in Warburg respirometer flasks containing 9K medium with ferrous sulfate as energy source and suspended bentonite is 2.8 times that in the absence of solids. The dissolution rate of pure pyrite in 250 cm³ shake flasks containing 9K medium and bentonite is considerably enhanced over that where the only solid phase is pyrite. Conversely, the oxidizing ability of the microorganism seems to be inhibited by all the activated carbons tested. The effect of ground glass seems to be related to its particle size distribution. Implications for the bioleaching of sulfide ores and coal pyrite are discussed in the light of current knowledge on the adsorption of Thiobacillus ferrooxidans cells on solid surfaces.     

Reaction products of ammonium nitrate phosphate fertilizers of varying water-soluble phosphorus content in different Indian soils

Studies were undertaken on the isolation and identification of reaction products of ammonium nitrate phosphate (ANP) fertilizers containing 30, 50 and 70 per cent water-soluble phosphorus (WSP) of total phosphorus in representative soils of the vertisol, oxisol, alfisol, entisol, mollisol and aridisol groups of India. ANP fertilizers were applied in solid form to soil, and reaction products formed at and around the site of ANP fertilizer placement were identified after six weeks incubation in moist soils by X-ray diffraction technique. DCPD (dicalcium phosphate dihydrate- CaHPO₄ · 2H₂O) was the major reaction product of ANP fertilizers containing 30 and 50 per cent WSP in vertisol, entisol, aridisol, mollisol, oxisol and alfisol, and of ANP containing 70 per cent WSP in vertisol, entisol, alfisol, aridisol and mollisol. DCP (dicalcium phosphate-CaHPO₄) was detected with ANP of 30 and 50 per cent WSP in the vertisol, alfisol, entisol, mollisol and aridisol groups of soils. In addition to DCPD, FePO₄ · 2H₂O (metastrengite) and AlPO₄ · 2H₂ O-monoclinic (metavariscite) were formed in alfisol and oxisol soils with ANP of 30 and 50 per cent WSP. FePO₄ · 2H₂O and AlPO₄ · 2H₂O (metavariscite) were identified in alfisol and oxisol soils while AlPO₄ · 2H₂O-orthorhombic (variscite) was formed in alfisol soils with ANP of 70 per cent WSP.     

Condensed combustion products of aluminized propellants. IV. Effect of the nature of nitramines on aluminum agglomeration and combustion efficiency

The condensed combustion products of two model propellants consisting of ammonium perchlorate, aluminum, nitramine, and an energetic binder were studied by a sampling method. One of the propellants contained HMX with a particle size D ₁₀ ≈ 490 μm, and the other RDX with a particle size _{D 10} ≈ 380 μm. The particle-size distribution and the content of metallic aluminum in particles of condensed combustion products with a particle size of 1.2 μm to the maximum particle size in the pressure range of 0.1–6.5 MPa were determined with variation in the particle quenching distance from the burning surface to 100 mm. For agglomerates, dependences of the incompleteness of aluminum combustion on the residence time in the propellant flame were obtained. The RDX-based propellant is characterized by more severe agglomeration than the HMX-based propellant — the agglomerate size and mass are larger and the aluminum burnout proceeds more slowly. The ratio of the mass of the oxide accumulated on the agglomerates to the total mass of the oxide formed is determined. The agglomerate size is shown to be the main physical factor that governs the accumulation of the oxide on the burning agglomerate. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 4, pp. 78–92, July–August, 2006.     

Direct Ink-Jet Printing of Vertical Walls

Direct jet printing can assemble ceramic powder into a three dimensional shape by firing droplets of ink through a nozzle to build a multiple layered structure. As with stereolithography and selective laser sintering, the surface texture is expected to witness the layered assembly. The ability to create vertical walls by direct ink-jet printing was explored using a test piece based on a maze. The structure and topography are discussed in terms of droplet spreading and drying.     

Action of the Coastal 1000‐Ton Surface Explosion on the Environment

Results of experimental investigations of the action of a coastal surface explosion of a 1000ton TNT charge on the environment are presented. Available databases were used, which are generally utilized for predicting ecological consequences of natural and maninduced explosive catastrophes, development of new methods of monitoring and identification of phenomena under consideration, their experimental and mathematical modeling, and testing of the models being developed.     

Innovative Membrane-Based Catalytic Process for Environmentally Friendly Synthesis of Oxygenates

Synthesis of liquid oxygenates from light alkanes (C₁--C₃) is achieved in a multifunctional three-phase catalytic membrane reactor (3PCMR) operating under mild conditions (T_R, 80-120 °C; P_R, 140 kPa). The features of superacid catalytic membranes mediated by the Meⁿ⁺/H₂O₂ Fenton system in activating C₁-C₃ alkanes are presented. The effect of operating conditions ([H₂O₂], [Meⁿ⁺]) on the catalyst activity is outlined. A general reaction pathway accounting for the activation of the CH bond of the alkane molecule on the superacid sites and the subsequent reaction of the activated alkane with primary reactive intermediates, generated from the Meⁿ⁺/H₂O₂ system, is proposed. The suitability of the 3PCMR in enabling simultaneous reaction and product separation is discussed.     

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups with reduced environmental impact

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups was prepared by the copolymerization of 4‐styrenesulfonic acid sodium salts (SSS) with N‐phenylmethacrylamide (copolymer A) or p‐hydroxy‐N‐phenylmethacrylamide (copolymer B), and its properties such as solubility changes, photochemical reaction, and photoresist characteristics were studied. The copolymer containing a relatively higher amount of SSS units was soluble in water. Solubility changes of the copolymers in the various buffer solutions of pH 4 ～ 11 and in water upon irradiation were observed by the measurement of insoluble fraction. The copolymers were soluble in water before irradiation, whereas they became insoluble upon irradiation with the UV light of 254 nm. The photochemical reaction of the copolymer studied by the UV and IR absorption spectroscopies indicated that a photo‐Fries rearrangement was favored for copolymer A, whereas a photocrosslinking reaction was predominate for copolymer B. Resist properties of the copolymers were studied by measurement of the normalized thickness and by development of the micropattern. Negative tone images with a resolution of 1 μm were obtained with these materials that have a sensitivity (D) of ～ 1100 mJ/cm² with an aqueous developing process.© 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1172–1180, 2002     

Lipid hydrolysis and oxidation on the surface of milled rice

The changes in milled rice FFA content and composition and in conjugated diene (CD) content and bacterial, yeast, and mold counts were determined at 24, 37, and 50°C and 70% RH over 50 d. There was a rapid rate of FFA formation during the first few days of storage, which was optimal at 37°C, but that slowed after 2, 4, and 5 d at 37, 24, and 50°C, respectively. There was a second increase in FFA after about day 12 that increased with increasing temperature, indicating nonlipase hydrolysis. Linoleic and oleic acids were the main components of the total FFA produced on the surface of milled rice. The pattern of CD development followed that of FFA increase. Bacterial growth correlated with increased FFA levels after 12 d of storage, suggesting that bacterial lipase rather than bran lipase may be responsible for rice lipid hydrolysis     

Inhibition effect of some polymers on the corrosion of cadmium in a hydrochloric acid solution

The effects of poly(vinyl alcohol) (PVA), poly(acrylic acid) (PAA), sodium polyacrylate (NaPA), poly(ethylene glycol) (PEG), pectin (P), and carboxymethyl cellulose (CMC) on the corrosion of cadmium in a 0.5M hydrochloric acid (HCl) solution were studied with both electrochemical impedance spectroscopy and Tafel plot techniques. Measurements were carried out at cathodic, open‐circuit, and anodic potentials. All the investigated polymers had inhibitory effects on both the cathodic (except for NaPA, P, and CMC) and anodic processes, with a predominant anodic inhibiting action. However, NaPA, P, and CMC exhibited a slight cathodic inhibiting action only at higher polymer concentrations. This behavior may be attributed to the very weak adsorbability of the polymers on the cathodic sites. Because PVA and PEG had hydroxy groups, there could be bridging between the polymer and the surface, resulting in an inhibiting effect in the HCl solution. However, PVA had much greater adsorbability on the surface than PEG at the anodic potential. The adsorption of most of the polymers obeyed a Temkin adsorption isotherm, and this indicated indicating that the main process of inhibition was adsorption. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 866–871, 2003     

水基(乳液)胶粘剂微生物污染及其罐内防腐效果测试

对广东省部分水基(乳液)胶粘剂生产企业微生物污染的来源和种群进行了调查,建立以微生物攻击挑战性试验来快速判定水基(乳液)胶粘剂罐内防腐效果的评价方法,探索该类胶粘剂微生物污染的有效防治技术。