基于单片机的皮带秤变频调速控制仪的设计与实现

介绍了皮带秤调速控制仪系统实现的原理和方法,提出了在皮带秤调速控制仪的动态跟踪问题,采用模糊-数字PID复合控制算法,既可计量也可以实时跟踪控制产量。实践表明,该控制方法理想地解决了实时跟踪问题,取得了较好的控制效果。     

Physiological arousal, dissonance, and attitude change: Evidence for a dissonance-arousal link and a "Don't remind me" effect.

Two experiments, with 80 undergraduates, replicated and extended research by R. T. Croyle and J. Cooper (see record 1984-11595-001) indicating that cognitive dissonance involves physiological arousal. In Exp I, Ss wrote counterattitudinal essays under conditions of high or low choice and, to assess arousal effects owing to effort, with or without a list of arguments provided by the experimenter. In high-choice conditions only and regardless of effort, Ss showed both arousal (heightened galvanic skin response) and attitude change. Arousal, however, did not decline following attitude change. The more effortful task (no arguments provided) produced increased arousal but not greater attitude change. In Exp II, the opportunity to change one's attitude following a freely chosen counterattitudinal essay was manipulated. As in Exp I, arousal increased following the essay but did not decline following a postessay attitude change opportunity. When Ss were not given an attitude change opportunity, however, arousal did decline. It is suggested that if dissonance is a drive state, drive reduction typically may be accomplished through gradual cognitive change or forgetting. (47 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

汽车振动噪声测试的阶次跟踪方法

汽车振动和噪声是影响舒适性的主要因素，如何采用有效的技术手段测量分析汽车的振动、噪声，日益受到人们重视。本文应用PULSE多分析系统中的阶次跟踪分析方法，测试分析了车内司机座位处振动、噪声随发动机转速变化的关系，结果发现，对于试验车在测试工况下1．5倍发动机转速时，车内振动和噪声都有一个峰值。文中通过阶次分析，对发动机运转稳定性进行了测试。为降低车内噪声和振动响应提供了分析依据和参考。     

基于Arduino的目标跟踪系统设计

利用Arduino设计并实现了一种目标跟踪系统。该系统包括图像采集处理、基于Arduino开发的下位机软件和舵机云台3个模块。相机实时接收图像,对捕获到的图像进行预处理,调用OpenCV中的函数对图像进行霍夫圆检测。计算机通过串口与Arduino开发板连接,将图形位置信息数据实时发送。通过Arduino控制舵机的转动角度,精确调整相机的方位、俯仰姿态,完成实时的目标追踪。实验结果表明,在使用Python开发的计算机软件中,通过动态目标视觉检测以及PID控制的角度输出,舵机云台实现了很好的控制效果,使二维转台实现圆形识别跟踪。     

超声加工中振幅衰减的控制

超声加工过程中，振动系统的振幅会发生衰减，造成加工过程不稳定，生产率降低。针对振幅衰减的原因，提出了先进行频率跟踪，然后在谐振状态下再提高振幅的方案，使振幅不因加工状态的变化而变化，从而保证加工质量，提高生产率。     

基于扰动观察法的光伏电池最大功率跟踪控制

本研究提出了基于扰动观察法的最大功率点跟踪方法。该控制方法以光伏电池的数学模型为基础,检测太阳能发电输出功率的变化,根据检测结果,调整光伏电池的相关参数,以达到最大功率点跟踪的目的。通过Matlab/Simulink仿真,结果表明提出的改进算法能有效提高光伏发电系统的发电效率。     

局部阴影下光伏阵列MPPT算法的研究

针对局部阴影状态下光伏阵列P-U特性曲线多峰值的问题,提出了一种基于搜索-计算-判断的三步法全局最大功率点跟踪(GMPPT)策略。该方法使用改进型扰动观察法反向搜索第一个峰值点,利用计算和判断减小搜索区域,将多峰值间接转化为单峰值搜索,解决了搜索过程中陷入局部极值的问题。通过建立3种阴影状态下的模型,将该方法与现有最大功率点跟踪(MPPT)算法进行仿真对比,并建立相应的试验进行验证。仿真及试验结果表明,该方法在有、无阴影状态下均能稳定实现GMPPT,有效地提高了系统的跟踪精度和跟踪速度。     

Characterization of the Functional Cross-Talk between Surface GABAA and Dopamine D5 Receptors

The γ-aminobutyric acid type A receptor (GABA_AR) plays a major role in fast inhibitory synaptic transmission and is highly regulated by the neuromodulator dopamine. In this aspect, most of the attention has been focused on the classical intracellular signaling cascades following dopamine G-protein-coupled receptor activation. Interestingly, the GABA_AR and dopamine D5 receptor (D5R) have been shown to physically interact in the hippocampus, but whether a functional cross-talk occurs is still debated. In the present study, we use a combination of imaging and single nanoparticle tracking in live hippocampal neurons to provide evidence that GABA_ARs and D5Rs form dynamic surface clusters. Disrupting the GABA_AR–D5R interaction with a competing peptide leads to an increase in the diffusion coefficient and the explored area of both receptors, and a drop in immobile synaptic GABA_ARs. By means of patch-clamp recordings, we show that this fast lateral redistribution of surface GABA_ARs correlates with a robust depression in the evoked GABAergic currents. Strikingly, it also shifts in time the expression of long-term potentiation at glutamatergic synapses. Together, our data both set the plasma membrane as the primary stage of a functional interplay between GABA_AR and D5R, and uncover a non-canonical role in regulating synaptic transmission.     

自动壳封焊机焊缝位置控制的实验研究

为解决自动壳封焊机机械凸轮式仿形的缺点，提出了基于电子凸轮的控制方案，为实现电子凸轮控制方案，在焊接轨迹形成分析的基础上，建立了焊枪位置控制的数学模型，改进后的自动焊机焊接试验表明，焊接位置误差较小，可以满足生产的需要。