Heat transfer enhancement of turbulent duct flow by vortex generators attached to a large eddy break-up manipulator

An experimental study was conducted to investigate the characteristics of wall heat transfer and momentum loss for turbulent duct flow disturbed by insertion of a complicated body composed of a Large Eddy Break-Up (LEBU) plate and winglet-type vortex generators. It was found that the LEBU plate reduces the wall heat transfer in the region downstream of the insertion position and that this suppression of heat transfer could be recovered by attaching vortex generators to the LEBU plate, i.e., conspicuous heat transfer enhancement was achieved over a large streamwise distance. The spatial distribution of the heat transfer coefficient obtained shows the same features as that observed in a previous study of a flat plate turbulent boundary layer. Therefore, the flow and thermal field structure of the turbulent duct flow downstream of the inserted body should be basically the same as those in the same region of the turbulent boundary layer. The effect of a notch, open in the LEBU plate behind the vortex generator, on heat transfer and pressure drop was also examined. The notch simulates the hole of the LEBU plate to be produced in a practical application when a vortex generator is produced by punching from the original plain LEBU plate. It was found that a vortex generator with an open notch works best in augmenting the wall heat transfer and also in suppressing the increase of momentum loss. © 1999 Scripta Technica, Heat Trans Asian Res, 28(3): 189–200, 1999     

冷凝式燃气热水锅炉节能分析

~~冷凝式燃气热水锅炉节能分析@叶勇军$南华大学建筑工程与资源环境学院!湖南衡阳421001 @寇广孝$南华大学建筑工程与资源环境学院!湖南衡阳421001 @王汉青$南华大学建筑工程与资源环境学院!湖南衡阳421001 @王志勇$南华大学建筑工程与资源环境学院!湖南衡阳421001~~~~~~~~     

夏玉米潜热通量的变化规律研究

针对生态系统的辐射收支、热量平衡和蒸发蒸腾分配对系统的水分转化和有效利用研究,利用波文比自动气象站观测了夏玉米在不同生育时期、不同天气情况下潜热通量的日变化、逐日变化以及逐月变化过程.结果表明,潜热通量日变化曲线是典型单峰型,潜热通量和太阳净辐射的逐日变化曲线、逐月变化曲线吻合,阴天潜热通量的峰值滞后于晴天和多云.     

Driving forces and obstacles with regard to co-operation between municipal energy companies and process industries in Sweden

District heating networks can technically enable energy-related co-operations between energy-intensive industries and municipal energy companies. The most common form of co-operation is to utilise industrial waste heat as the primary energy source in district heating networks. However, another type of co-operation is to jointly own a plant that produces both process steam for the industry and hot water for district heating. In this article, eight Swedish energy co-operations are studied and the main focus is on the process leading to co-operations of this kind. Different aspects of factors that facilitate or obstruct the start up and continuous daily operation of a co-operation are discussed. The main conclusion is that while the primary reasons for the foundation of such co-operations are favourable techno-economic factors, this is not enough for a co-operation to emerge. This study highlights the importance of people with a real ambition to co-operate in both parties in the co-operations.     

Thermoelectric cold-chain chests for storing/transporting vaccines in remote regions

The cold chain is one of the key elements of the preventive health-care delivery system. Vaccines have to be carried long distances, stored in remote places and during this period the temperature has to be maintained within certain specified values. Realizing the needs of such requirements, the Department of Science & Technology, New Delhi (Govt. of India) assigned a project to the R&D Division of MECON, Ranchi for development of Thermoelectric Cold-Chain Chest operated by 12 V DC vehicular battery. The resulting portable thermoelectric (i.e. Peltier effect) Cold-Chain Chest (TCC) operated successfully even in an ambient environment of 45 °C, mainly for preserving and transporting life-saving medicines for urban as well as rural areas.     

Experimental study of thermal performance improvement in a cross-flow heat exchanger by using copper foam

In this study, copper foam was used as a porous medium in place of traditional aluminum fins. A comparison between the two heat exchangers—one with fins and the other with copper foam—was conducted under various conditions. The air inlet velocity ranged from 0.9 to 9.3 m/s, and the water inlet temperature ranged from 10°C to 18°C. Different water flow rates were tested. A comparison was made between the performance of copper foam and aluminum fins by calculating several parameters, including thermal resistance, heat exchanger effectiveness, Colburn factor, Nusselt number, friction factor, and area goodness factor (AG). The experimental results showed that at low air velocities, the heat transfer coefficient for both types of heat exchangers was almost equal. However, at high air velocities, the copper foam exhibited a higher heat transfer coefficient. The Colburn factor was higher for the heat exchanger with copper foam than in the conventional fins, where it was equal to 0.1959 for the copper foam and 0.1186 for the fins. On the other hand, the AG was higher in the case of fins than in the heat exchanger with copper foam.     

Specific Oxygenated Groups Enriched Graphene Quantum Dots as Highly Efficient Enzyme Mimics

Significant progress is achieved for the utilization of graphene quantum dots as enzyme mimics in various biomedical fields recently. Although promising, the biocatalytic performance is far from satisfactory. Here, the rational design and synthesis of specific oxygenated groups enriched graphene quantum dots (o‐GQDs) via a facile oxidation reflux route is reported. These well‐prepared o‐GQDs with uniform size exhibit an ultrahigh peroxidase‐like activity in a wide range of pH values, and their superior performance is verified by using glucose detection as a typical model. Compared with classical nanozymes, these o‐GQDs show multiple times higher enzymatic activity. It is believed that the super facile synthesis strategy can greatly facilitate the practical use of o‐GQDs as enzyme mimics in the future.     

3D Metal printed heat sinks with longitudinally varying lattice structure sizes using direct metal laser sintering

This research relates to the design, modelling and fabrication of 3D metal printed heat sinks. The heat sinks presented in the research are the commonly used longitudinal fin solid heat sink (LFSHS) and three LFSHS lattice structure designs, differing only in their lattice sizes, fabricated using the Direct Metal Laser Sintering (DMLS) technique in Maraging Steel (MS1), on an EOSINT M280 system. In order to increase the heat sink surface area, the heat sinks are manufactured with mesh lattices along the length of the fins, while keeping the overall heat sink volume constant. The research is focused on pushing the limitations of the DMLS technique for the development of repeating unit, lattice structures heat sinks, and to examine the effect of incrementally varying the lattice sizes with regards to the resultant surface area of the heat sink and the thermal performance of the system. The results obtained under natural convection show that the thermal performance of the LFSHS outperformed all lattice structure heat sinks. This is due to the fact that, the pressure drop across the lattice heat sinks were so high, due to lattice meshes that it negated the positive effect of the greater surface area.     

Cluster ensembles: A survey of approaches with recent extensions and applications

Cluster ensembles have been shown to be better than any standard clustering algorithm at improving accuracy and robustness across different data collections. This meta-learning formalism also helps users to overcome the dilemma of selecting an appropriate technique and the corresponding parameters, given a set of data to be investigated. Almost two decades after the first publication of a kind, the method has proven effective for many problem domains, especially microarray data analysis and its down-streaming applications. Recently, it has been greatly extended both in terms of theoretical modelling and deployment to problem solving. The survey attempts to match this emerging attention with the provision of fundamental basis and theoretical details of state-of-the-art methods found in the present literature. It yields the ranges of ensemble generation strategies, summarization and representation of ensemble members, as well as the topic of consensus clustering. This review also includes different applications and extensions of cluster ensemble, with several research issues and challenges being highlighted.