光学纯去氢枞酸的制备与表征

用化学方法由歧化松香制得光学纯去氢枞酸，并以ＵＶ、ＩＲ、＾１ＨＮＭＲ、ＭＳ、元素分析和旋光对其结构进行了表征。     

我国二氧化硫氧化制硫酸的钒催化剂现状和展望

从钒催化剂的生产、市场、开发、质量等方面分析我国二氧化硫氧化制硫酸催化剂的现状，指出我国钒催化剂与国外产品存在的差距和原因，提出发展钒催化剂的对策。     

基于火焰摄动谱分布的动态燃烧优化

提出基于火馅摄动谱分布特性与火馅微压振动信号的燃烧控制方法，通过分析三层小速分解后的信号平均幅值变化特点可以找到最优燃烧状态。     

基于灰度形态重构的颗粒图像分割方法

提出了一种基于距离变换、形态重构和分水岭算法的图像分割算法。将一幅图像通过距离变换得到距离灰度图,与形态重构算法结合,得到颗粒图像的标识点图,用标识点图对距离灰度图进行分割,再用分水岭变换对分割后的距离灰度图进行变换。试验表明,该算法能有效合理地解决粘连或者重叠颗粒等物体的分割。     

水流掺气对明流泄洪洞及挑坎水力特性的影响

水流充分掺气可以避免高流速泄洪设施发生空蚀,但也会改变相关水力特性。通过对某大坝泄洪洞掺气设施水力模型试验及关于水流表面自掺气发生条件的相关分析,提出了在全程流速超过38 m/s,长度达550 m的明流洞内仅布置一级掺气设施的建议,较通常情况减少了两级;并针对泄洪洞出流方向与河道流向交角达60°的特点,研究提出了一种大差动异型鼻坎消能工。水工模型试验成果表明,其挑流水舌沿河道纵向扩散良好,水舌外缘与河道对岸保持了30 m以上的安全距离。该泄洪洞建成后经历了高水头、较长时间的泄洪运行,明流洞和鼻坎消能工均无空蚀发生,但挑坎水舌却冲刷到对岸边坡。     

How social distance shapes human–robot interaction

This paper investigates how social distance can serve as a lens through which we can understand human–robot relationships and develop guidelines for robot design. In two studies, we examine the effects of distance based on physical proximity (proxemic distance), organizational status (power distance), and task structure (task distance) on people׳s experiences with and perceptions of a humanlike robot. In Study 1, participants (n=32) played a card-matching game with a humanlike robot. We manipulated the power distance (supervisor vs. subordinate) and proxemic distance (close vs. distant) between participants and the robot. Participants who interacted with the supervisor robot reported a more positive user experience when the robot was close than when the robot was distant, while interactions with the subordinate robot resulted in a more positive experience when the robot was distant than when the robot was close. In Study 2, participants (n=32) played the game in two different task distances (cooperation vs. competition) and proxemic distances (close vs. distant). Participants who cooperated with the robot reported a more positive experience when the robot was distant than when it was close. In contrast, competing with the robot resulted in a more positive experience when it was close than when the robot was distant. The findings from the two studies highlight the importance of consistency between the status and proxemic behaviors of the robot and of task interdependency in fostering cooperation between the robot and its users. This work also demonstrates how social distance may guide efforts toward a better understanding of human–robot interaction and the development of effective design guidelines.     

浅谈皮带定量给料机的机械配置选型

皮带定量给料机是目前水泥生产企业中最为常见的过程计量和配料的设备。作者结合多年来开发、调试和使用皮带定量给料机的实践经验与资料积累，介绍了如何根据实际需要和使用量程，通过对皮带定量给料机的主要机械参数的计算来合理地选用定量给料机的型号和规格。     

基于密度调整的改进自适应谱聚类算法

针对谱聚类存在构造相似度矩阵时对尺度参数敏感以及处理多重尺度数据集效果不理想的缺陷, 提出一种基于密度调整的改进自适应谱聚类算法. 该算法将样本点所处领域的密度引入谱聚类, 利用密度差来调整样本点之间的相似度, 使其更符合实际簇类中样本点间的内在关系, 在一定程度上解决了多尺度聚类问题; 同时, 通过样本点的近邻距离自适应得到尺度参数, 使算法对尺度参数相对不敏感. 仿真实验验证了所提出算法的有效性和优越性.

     

Euclidean Distance Mapping for computing microstructural gradients at interfaces in composite materials

This paper presents an image analysis procedure using Euclidean Distance Mapping to compute microstructural gradients at interfaces in composite materials. This method is capable of producing phase distribution plots at single pixel strip width very quickly and efficiently. Compared to conventional dilation-subtraction strip analysis, the new method is faster, more flexible and is not constrained by feature geometry and boundary conditions. This allows for truly random and unbiased sampling. The new method was applied to investigate microstructural gradients at the interfacial transition zone (ITZ) of an ordinary Portland cement concrete. The average results show strong gradients in anhydrous cement and detectable porosity at the ITZ, but this is highly variable from location to location. The overall ITZ characteristics depend on the amount of calcium hydroxide deposited on aggregate particles. The new method was able to measure the effect of these calcium hydroxide deposits on the porosity gradient, which has not been reported before.     

搅拌设备设计的几点体会

从搅拌轴的支承条件、轴承间最佳距离的确定以及搅拌轴的稳定器等几个方面讨论 ,分析了其对搅拌设备设计的影响 ,并提出了相应的措施和方法。