影响邻二甲苯进料负荷的技术分析

对苯酐生产中影响邻二甲苯进料负荷的主要因素进行了定性分析，从而为实际生产操作过程的调整及高负荷催化剂的开发提供了理论依据。     

PMMA‐modified divinylester/styrene resins: Phase diagrams and morphologies

Binary and ternary experimental cloud‐point curves (CPCs) for systems formulated with a low molar mass synthesized divinylester (DVE) resin, styrene (St), and poly(methyl methacrylate) (PMMA) were determined. The CPCs results were analyzed with the Flory–Huggins (F‐H) thermodynamic model taking into account the polydispersity of the DVE and PMMA components, to calculate the different binary interaction parameters and their temperature dependences. The St‐DVE system is miscible in all the composition range and down to the crystallization temperature of the St; therefore, the interaction parameter expression reported for a higher molar mass DVE was adapted. The interaction parameters obtained were used to calculate the phase diagrams of the St‐PMMA and the DVE‐PMMA binary systems and that of the St‐DVE‐PMMA ternary system at three different temperatures. Quasiternary phase diagrams show liquid–liquid partial miscibility of the St‐PMMA and DVE‐PMMA pairs. At room temperature, the St‐DVE‐PMMA system is miscible at all compositions. Final morphologies of PMMA‐modified cured St‐DVE materials were generated by polymerization‐induced phase separation (PIPS) mechanism from initial homogeneous mixtures. SEM and TEM micrographs were obtained to analyze the generated final morphologies, which showed a direct correlation with the initial miscibility of the system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4539–4549, 2006     

Estimation of rheological parameters using velocity measurements

In the present investigation, we develop a method for estimating rheological parameters of viscoelastic fluids using velocity measurement in a square straight channel. It is believed that a somewhat complicated patterns of secondary flows due to the non-zero second normal stress difference are more useful than the simple viscometric flows traditionally adopted in the determination of rheological parameters. The inverse problem of determining the rheological parameters from a set of velocity measurements is solved using a conjugate gradient method. When applied to a general constitutive equation encompassing the UCM model, the Oldroyd-B model and the PTT model, the present method is found to yield a reasonably accurate estimation of five rheological parameters simultaneously even with noisy velocity measurements.     

醚菊酯的气相色谱分析

本文以气相色谱内标法建立对醚菊酯的定量分析方法,其标准偏差0.18,变异系数0.24%,线性相关0.999 996,平均回收率99.98%。     

Cross-evaluation-based weighted linear optimization for multi-criteria ABC inventory classification

Multi-criteria ABC inventory classification (MCIC), which aims to classify inventory items by considering more than one criterion, is one of the most widely employed techniques for inventory control. This paper suggests a cross-evaluation-based weighted linear optimization (CE-WLO) model for MCIC that incorporates a cross-efficiency evaluation method into a weighted linear optimization model for finer classification (or ranking) of inventory items. The present study demonstrated the inventory-management-cost effectiveness and advantages of the proposed model using a simulation technique to conduct a comparative experiment with the previous, related investigations. We established that the proposed model enables more accurate classification of inventory items and better inventory management cost effectiveness for MCIC, specifically by mitigating the adverse effect of flexibility in the choice of weights and yielding a unique ordering of inventory items.     

Safety-based availability assessment at design stage

The availability of a system or equipment is one of the crucial characteristics that measures the customer satisfaction and strongly influences his final choice decision between concurrent products. The aim of this work is to provide an approach to improve the products availability assessment by taking into account the safety criteria by considering the use situations at design stage. Our work focuses on the routine design of complex products. The availability is often simply estimated considering reliability and maintainability. Basically, the intrinsic availability is the probability that it is operating satisfactorily at any point in time when used under conditions stated by design specifications. The time considered includes operating time and active repair time. Thus, intrinsic availability excludes from consideration all other times in the product lifecycle such as: accident management time, storage time, administrative time or logistic time. But many studies show that the loss of availability performance is also due to accidents that occur in different unforeseeable utilization situations. This engenders stops of the system to ensure the users safety according to standards recommendations. In this purpose, we consider the structural product architecture and the different use cases that correspond to the operational states and downtimes due to stop events that may happen during the utilization like failures, maintenance tasks and accidents. Then, we propose a product behavioral analysis including the use cases to describe interactions between the product and users or maintenance operators. We use Markov chains to model the use cases corresponding to operating time (OT), maintenance time (MT) and preparing time after accidents (RT). Then these three parameters are considered to specify a generic approach to improve the availability assessment. Such an approach provides the traceability of the product behavior along its lifecycle. In this way, the main causes of stop can be identified and this may guide the designer for improving the availability of the product future versions. To validate our approach, an application is presented considering a printing line. The comparison of our simulation considering an industrial case study shows a good agreement about the influence of safety on the availability.     

Experimental investigations and thermodynamic modelling of KCl–LiCl–UCl3 system

Experimental investigations and Gibbs energy modelling of KCl–LiCl–UCl₃ system employing CALPHAD method are reported. Gibbs energy modelling of the subsystems KCl–UCl₃ and LiCl–UCl₃ was carried out primarily using phase diagram data from the literature. For the Gibbs energy modelling of the KCl–LiCl subsystem, new phase boundary data corresponding to four terminal compositions $(x_{\mathrm{LiCl}}=0.03$, 0.05, 0.95 and 0.97) obtained through differential thermal analysis data along with thermochemical and phase diagram data from the literature were used. Thermal analysis was also carried out for KCl–LiCl eutectic mixture containing small amounts of UCl₃ $(x_{{\mathrm{UCl}}_3}=9.03\times {10}^{-3}$ and $1.79\times {10}^{-2}$). The liquidus temperatures for these compositions were found to be 637 K and 674 K. Electromotive force data for dilute solutions of UCl₃ in the KCl–LiCl eutectic melt, measured in the temperature range 708–833 K in the present work, were found to be in good agreement with the literature data. These data were also used as input for the Gibbs energy modelling of the KCl–LiCl–UCl₃ system. In order to improve the quality of the resulting Gibbs energy functions of the quasibinaries and the quasiternary, enthalpies of mixing of the corresponding melts estimated using an empirical correlation based on surrounded-ion model were also used as input. Finally, the generated Gibbs energy functions were used to compute phase equilibria.     

Discourse cues to deception in the case of multiple receivers

Behavioral cues to deception are instrumental in detecting deception. As one of the primary sources of deception behavior, text has been analyzed at the level of sub-sentence or message but not the discourse of interaction. Additionally, empirical studies on cues to deception in the case of multiple receivers remain nonexistent. To fill these voids, we propose a discourse framework and six hypotheses about deception behaviors in a multi-receiver environment. The deception behaviors are operationalized by discourse features based on an analysis of real-world data. The results of statistical analysis validate the efficacy of discourse features in discriminating deceivers from truth-tellers.     

Ce:Nd:ZnWO4激光晶体的生长及其光谱性能

采用提拉法生长出光学质量的Nd:ZnWO4,Ce:ZnWO4和Ce:Nd:ZnWO4晶体.通过X射线衍射仪对晶体样品的微观结构进行了分析.测试了晶体的吸收光谱、电感耦合等离子体原子发射光谱和荧光光谱.根据Judd-Ofelt理论计算出Nd:ZnWO4晶体中Nd3 的强度参数为:Ω2=6.820 2×10-20 cm2,Ω4=0.463 3×10-20 cm2,Ω6=0.443 5×10-20 cm2.研究了Ce3 和Nd3 之间的能量转移现象.结果表明:Nd3 在850 nm激发时产生上转换发射峰位于474 nm和572 nm处,分别对应于2G9/2,4K13/2到基态能级4I9/2跃迁,计算出该峰的自发辐射几率为1 360 s-1,荧光寿命为7.353×10-4 s,发射截面为0.905 9×10-23 cm2.     

Ion‐exchange resins. II. Acrylamide crosslinked copolymers as precursors for some ion exchangers

Crosslinked copolymers of acrylamide (AA) and ethylacrylate and some ion exchangers derived from them containing either primary amine groups, obtained by the Hofmann degradation of the amide groups, or carboxylic groups, obtained by the alkaline hydrolysis of the ester groups, were studied. Divinylbenzene and N,N′‐methylenebisacrylamide were used as crosslinkers. The starting copolymers and the corresponding ion exchangers were characterized by IR spectroscopy, swelling behavior, and thermogravimetric analysis. The ion‐exchanger properties were correlated with the crosslinker nature and the chemical reactions performed on the AA copolymers. The average molecular weight between two crosslinks, determined from the swelling data in water, was compared with that calculated on the basis of the copolymerization stoichiometry only for the carboxylic cation exchangers. In this way, the preservation of the crosslink density after the hydrolysis was revealed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2701–2707, 2003