Direct synthesis and catalytic performance of ultralarge pore GaSBA-15 mesoporous molecular sieves with high gallium content

Mesoporous GaSBA-15 molecular sieves with different n_Si/n_Ga ratios have been directly synthesized using Pluronic 123 triblock polymer as a structure-directing agent by pH-adjusting method. The mesoporous materials have been characterized using ICP-AES, XRD, N₂ adsorption, ⁷¹Ga-MAS NMR, SEM and TEM. ICP-AES studies show a high amount of gallium incorporation on the silica pore walls. The structural and textural properties of calcined GaSBA-15 are characterized by XRD and N₂ adsorption. ⁷¹Ga MAS NMR results demonstrate that a high amount of tetrahedral-gallium could be substituted for Si in the framework of SBA-15. TEM and FE-SEM images show the uniform pore diameter and rope-like hexagonal mesoporous structure of GaSBA-15. These GaSBA-15 materials have been used as catalysts for vapour-phase t-butylation of 1,2-dihydroxybenzene (DHB) for selective synthesis of 4-t-butylcatechol (4-TBC) under different reaction conditions. GaSBA-15(10) gave the highest 93.2% conversion of DHB and 95.7% selectivity of 4-TBC as compared with other GaSBA-15 catalysts.     

永州电力通信交换网集中操作和维护的实现

分析实现永州电力通信交换网集中操作和维护的必要性，介绍了实现程控交换机远程操作和维护的两种方式，总结在实践过程中所得到的经验和教训。     

最大重迭对称性分子轨道和分子几何参数计算

建立了AMl级别的最大重迭对称性分子轨道计算方案(MOSMO)。采用通常的半经验分子轨道方法AMl级别中完全相同的参数，计算了各种分子的几何参数等。所得计算结果与实验值及HF／6-31G*从头算方法计算结果相符，说明提出的计算方案是可行的。同时，由于提出的计算方案过程简单，更易推广使用到从头算方法难以解决的大分子体系和超分子体系的结构和性质研究。     

Manufacturing and structural safety evaluation of a composite train carbody

This paper explains the manufacturing process of a composite train carbody with a sandwich composite structure for bodyshell and a stainless steel structure for the under frame. In addition, the structural behavior and safety of the composite carbody of the Korean tilting train was investigated by the static load tests. From the test results, the stiffness of the composite carbody met the specified design. In the aspect of strength, the maximum stress of the composite bodyshell was of 12.2% of strength of CF1263 carbon/epoxy.     

真空碳热还原法制备高密度碳化钒

研究了采用真空碳热还原法由三氧化二钒制备碳化钒，并研究了碳化钒产物密度随实验条件的变化规律。找到了用于强化碳化钒产物密度的添加剂，研究结果表明，反应温度，添加剂是影响碳化钒产物密度的主要因素。反应时间对产物密度也有一定影响。研究结果同时表明，含铁化合物能有效地提高产物密度。     

连铸稀土加入工艺试验

对多流大方坯连铸机生产稀土钢的稀土加入工艺进行了试验,分析了钢包、中间包、结晶器喂稀土丝的优缺点,并进行了对比。根据包钢大方坯连铸工艺的特点和实际情况,选出了大方坯连铸稀土钢的稀土加入工艺。     

Self-controlled case series analyses: Small-sample performance

Second-order expressions for the asymptotic bias and variance of the log relative incidence estimator are derived for the self-controlled case series model in a simplified scenario. The dependence of the bias and variance on factors such as the relative incidence and ratio of risk to observation period are studied. Small-sample performance of the estimator in realistic scenarios is investigated using simulations. It is found that, in scenarios likely to arise in practice, asymptotic methods are valid for numbers of cases in excess of 20-50 depending on the ratio of the risk period to the observation period and on the relative incidence. The application of Monte Carlo methods to self-controlled case series analyses is also discussed.     

FDTD analysis of switching characteristics in magnetooptic functional devices using magnetostatic surface waves

Collinear magnetooptic interaction with magnetostatic surface waves (MSSW) can be used for wavelength‐selective switches, wavelength filters, and frequency shifters in wavelength‐division‐multiplexed (WDM) photonic networks and optical processing systems. The switching efficiency can be improved with a multilayer waveguide structure. To investigate the dynamic switching characteristics, the FDTD method was employed. The mode conversion between TE and TM mode was successfully demonstrated with FDTD simulation. The filtering characteristics were also evaluated. The FDTD results were compared with the result from the coupled mode theory, and good agreement was obtained. Switching of an optical pulse was also demonstrated by the FDTD method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 40–47, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20501     

Tuning fuzzy power-system stabilizers in multi-machine systems by global optimization algorithms based on efficient domain partitions

In this paper, the problem of global tuning of fuzzy power-system stabilizers (FPSSs) present in a multi-machine power system in order to damp the power system oscillations is considered. In particular, it is formulated as a problem of global minimization of a multiextremal black-box function over a multidimensional hyperinterval. A global optimization technique, recently proposed, is used for solving the stated problem: the search hyperinterval is partitioned into smaller hyperintervals and the objective function is evaluated only at two vertices corresponding to the main diagonal of the generated hyperintervals, thus avoiding unnecessary ponderous simulations. Then, the performances of this technique are numerically compared with ones of a genetic algorithm (GA).     

用热分析法研究硝化棉的熔化过程

用ＭＤＳＣ，显微镜温台熔点测定仪和固体原位反应池／快速扫描傅立叶变换红外光谱联用装置考察了硝化棉的熔化过程。ＭＤＳＣ曲线表明吸热过程是可逆的，它系由ＮＣ和部分分解凝聚相产物的混合物的固液相变所引起。由ＮＣ的ＭＤＳＣ曲线得到的熔点，熔化含，熔化熵，分解含和分解反应热温熵分别为４７６．８４Ｋ，２０５．６Ｊ．ｇ＾－１，０．４３１２Ｊ．ｇ＾－１．Ｋ＾－１，－２４７５．０Ｊ．ｇ＾－１，－５．２４２Ｊ．ｇ＾－