大型常压锥顶贮罐的设计

以工程实例为依据，论述国内以往较少采用的大型梁柱式支承锥顶贮罐的结构，介绍了国内外相关设计标准，给出了贮罐的典型结构－斜椽，横梁和立柱的计算公式，并用Excel电子表格编制了计算书。     

储罐地震易损性数值仿真分析

为了研究储罐的抗震性能,忽略储罐罐壁的质量,将储罐中的液体质量简化为三质点体系模型,地基土由两个弹簧和两个阻尼器模拟.考虑罐体的平动和转动,建立了在水平地震激励下储罐的动力方程;给出了随机变量的概率模型和基于易损性理论的失效概率计算方法.通过对大庆某油库2×104 m3和5×104m3两种大型储罐进行数值仿真方法的地震易损性分析.结果表明:随着地震烈度的增大,储罐的易损性逐渐增大;5×104 m3储罐的抗震性能要好于2×104 m3储罐;2×104 m3和5×104 m3储罐的主要失效模式分别是抗失稳和抗提离.由此可见从多个失效模式对储罐进行地震易损性研究比从单一失效模式进行易损性研究更加科学.     

煤尘爆炸特征参数影响因素研究

采用20L球形爆炸装置研究了煤尘粒径、浓度、点火能量对煤尘爆炸最大压力、爆炸最大压力上升速率的影响。研究结果表明,在煤尘粒径一定的条件下,随着煤尘浓度的增大,爆炸最大压力及爆炸最大压力上升速率先增大后减小,煤尘浓度在400~480g/m3之间取得爆炸最大压力最大值0.94MPa、爆炸最大压力上升速率最大值28.79MPa/s;在煤尘浓度一定的条件下,爆炸最大压力不随煤尘粒径的减小而单调变化,爆炸最大压力上升速率随煤尘粒径的减小而逐渐增大;随着点火能量的增大,爆炸最大压力及爆炸最大压力上升速率明显增加。     

Investigation of Flow Patterns in Continuous‐flow Stirred Vessels by Laser Doppler Velocimetry

The flow structure of a continuous‐flow reactor stirred by a Rushton turbine was investigated by laser Doppler velocimetry for two different mean residence time‐mixing time ratios. Velocity measurements were obtained for two inlet locations, corresponding to the incoming liquid stream being fed co‐currently or counter‐currently to the flow discharged by the turbine. In all investigated configurations and for all operating conditions, it was found that the flow disruption caused by the incoming liquid stream was observable mainly in the first vessel quarter, which followed the feed‐tube plane. From comparison of the velocities encountered in the various planes in the continuous‐flow reactor to the velocities of the batch reactor, it was also concluded that it may be possible to intensify the usage of the turbine‐stirred vessel by decreasing the characteristic times ratio, without considerable flow by‐pass and/or short‐circuiting problems.     

双球面投影几何可量测全景模型的构建

针对全景影像难以提供空间度量的问题,提出一种基于双球面投影几何的可量测立体全景模型构建方法.该方法依据球面全景投影关系与多视几何原理,采用对应变换与本质变换求取旋转及平移参数,并推导出双球面核线约束;在此基础上,建立起双球面投影几何的立体全景模型,解决了球面全景的量测问题.实验结果表明,文中方法可使全景影像在真实呈现户外场景的同时,提供满足一定应用需求的量测分析功能.     

航行状态下减摇水舱减摇能力仿真研究

本文根据“船舶-水舱”系统的运动模型,研究被动式减摇水舱在航行状态下的减摇能力。分别在不同海况、航速以及航向等条件下进行仿真,总结出水舱在不同航行状态下的减摇规律。并分析了可控被动式水舱的控制机理,为研究水舱的控制策略奠定了基础。     

坦克设计新发展

本文提出“针对式坦克发展战略”主要内容,它要求“突破性新概念高新技术”,获得“减法设计方法”,因而形成“坦克发展新道路”.运用“系统总体取胜”的系统工程理论,处理好坦克全系统“综合”、全系统与分系统“配置”、分系统与分系统“匹配”、全系统与人及作战环境“适应”四大关系,以“相互同水平组合”替代“单项高水平爬坡”.通过“从系统总体着眼、由边际零部件突破”的途径,善于从各个部分或部件之间的结合部加以突破,实现坦克设计新发展.     

Analogy and duality of texture analysis by harmonics or indicators

According to the classic harmonic approach, an orientation density function (odf)f is expanded into its corresponding Fourier orthogonal series with respect to generalized spherical harmonics, and a pole density function (pdf) into its corresponding Fourier orthogonal series with respect to spherical harmonics. While pdfs are even (antipodally symmetric) functions, odfs are generally not. Therefore, the part of the odf which cannot be determined from normal diffraction pdfs can be mathematically represented as the odd portion of its series expansion. If the odff is given, the even part can be mathematically represented explicitly in terms off itself. Thus, it is possible to render maps ofharmonic orientation ghosts, and to evaluatevariants of mathematical standard odfs resulting in identical pdfs independent of pdf data. However, if only normal diffraction pdfs are known, the data-dependentvariation width of feasible odfs remained unaccessible, and within the harmonic approach a measure of confidence in a solution of the pdf-to-odf inversion problem does not exist.According to any discrete approach, an odff defined on some setG of orientations is expanded into its corresponding Fourier orthogonal series with respect to indicator functions of the elements of a partition ofG, and a pdf defined on the upper (lower) unit hemisphereS ₊ ^{3 3} into its corresponding Fourier orthogonal series with respect to indicator functions of the elements of a partition ofS ₊ ³ . The ambiguity of the pdf-to-odf inversion problem is discussed in terms of column-rank deficiency of the augmented projection matrix. The implication of the harmonic approach to split an odf into auniquely determined and anundetermined part does no longer seem to be reasonable. However, it is possible to numerically determine data-dependent confidence intervals for the Fourier coefficients with respect to the indicator functions which can be immediately interpreted as mean orientation densities within the elements of the partition ofG. Doing so for all Fourier coefficients in the finite series expansion, i.e. for all elements of the partition of the setG, eventually results in the data-dependent variation width of odfs feasible with respect to given pdf data, and to the partitions ofG andS ₊ ³ .Thus it is confirmed that the appearance of orientation ghosts, in particular correlations oftrue andghost orientation components, depends on the representation of an odf. It may be questioned whether in practical applications the implicit assumption of the harmonic method that the even part can be determined uniquely and free of error is generally a reasonable initial condition to develop ghost correction procedures.     

ISS feedback control redesign for continuous stirred tank reactors

In this paper a new nonlinear feedback control law for continuous stirred tank reactors, obtained by exact Input/Output (I/O) linearization and Sontag's input‐to‐state stability feedback control redesign methods, is studied. By the new feedback control law, a significant attenuation of the disturbance effect is guaranteed, with evident improvement with respect to control laws obtained by the exact I/O linearization method. The performed simulations validate the theoretical results. Copyright © 2010 John Wiley & Sons, Ltd.