用热分析法研究硝化棉的熔化过程

用ＭＤＳＣ，显微镜温台熔点测定仪和固体原位反应池／快速扫描傅立叶变换红外光谱联用装置考察了硝化棉的熔化过程。ＭＤＳＣ曲线表明吸热过程是可逆的，它系由ＮＣ和部分分解凝聚相产物的混合物的固液相变所引起。由ＮＣ的ＭＤＳＣ曲线得到的熔点，熔化含，熔化熵，分解含和分解反应热温熵分别为４７６．８４Ｋ，２０５．６Ｊ．ｇ＾－１，０．４３１２Ｊ．ｇ＾－１．Ｋ＾－１，－２４７５．０Ｊ．ｇ＾－１，－５．２４２Ｊ．ｇ＾－     

On modeling the design of cellular manufacturing systems

A new optimization model is discussed for the design of cellular manufacturing systems. It is based on an integer programming formulation that updates some other models by eliminating redundant machine assignment and cost coefficients dependent on cell configuration. To reduce computational burdens, a simplified integer programming model and a decomposition algorithm are proposed. Several computer solutions were performed to evaluate the performance of the new model. The computational results are discussed.     

A methodology for investigating effects of cell size on operational flexibility in flexible manufacturing systems

There are two aspects to cell formation in flexible manufacturing systems, cell sizing or deciding on the optimum number of machines to be allocated to each cell, and then allocation of specific machines to each cell. Although the latter problem has been investigated extensively there is a paucity of published work on the former. This paper discusses the effects of cell sizing on operational flexibility.Operational flexibility is that aspect of flexibility that enables manufacturing systems to respond with speed and efficiency to changes in the manufacturing environment while maintaining an effective level of control.     

Effect of temperature on recombinant protein production using the Bm5/Bm5.NPV expression system

A series of experiments have been conducted using a recombinant baculovirus/insect cell expression system (Bm5/Bm5.NPV.CAT) to establish the optimum temperature for both cell growth and virus infection. Bm5 cell growth was found to be limited at temperatures below 22°C and ceased completely at temperatures above 34°C. In the range between 24 and 28°C, final cell densities always reached 96% of the highest achievable viable cell density. The shortest population doubling time was obtained at 28°C. Overall, a consistent increase in metabolism with increasing temperatures was observed. During the infection/viral replication phase, an increase in the temperature from 25 to 31°C resulted in a faster decrease in viable cell density and an earlier production of chloramphenicol acetyltransferase (CAT). Furthermore, protein yield at temperatures above 28°C was significantly reduced. Overall, the best temperature for the infection phase for the Bm5/Bm5.NPV expression system was found to be 25°C when the cells are cultured in serum free media.     

Probabilistic cell modelling of cleavage fracture

Various aspects on probabilistic modelling of cleavage fracture are discussed. The investigation involves consideration of a unit cell with an explicitly modelled void. The results from this model are compared with results for the case when the void content is accounted for in the sense of a Gurson-Tvergaard law. It is found that explicit modelling of the void can give substantially different results for the fracture probability. The effect depends on the exponent in the assumed Weibull distribution, the threshold stress, the constraint conditions and the hardening of the material. This revised version was published online in August 2006 with corrections to the Cover Date.     

气囊内模制作桥面板在华丰湾防洪工程中的应用

采用气囊作内模进行浇筑桥面板混凝土 ,加快了预制桥面板施工进度 ,确保工程施工质量 ,并降低了工程施工成本     

MALTING AND BREWING SCIENCE: CHALLENGES AND OPPORTUNITIES*,†

Molecular technologies have been developed for the transformation of barley. These technologies complement current methods of barley breeding. In addition, they offer the potential of altering specific components in barley that affect malting quality and of introducing foreign genes, controlling desirable traits, into barley. Application of genetic engineering to improving malt quality factors such as cell wall degradation, protein modification, starch hydrolysis and flavour stability, is discussed. Limitations to the use of this technology for improving malt-related functional properties of barley components such as cell walls and starch granules are also evaluated. Some possible constraints to the utilization of genetic engineering for malt quality improvements are identified.     

电话通信设备电磁干扰的测量分析

本文探讨了ＴＥＭ室测量电话通信设备辐射干扰的原理、方法，得出了在线电话终端０．１５～３０ＭＨｚ频段辐射干扰测量结果，并进行了分析。     

Improvement of device performances by thin interlayer in conjugated polymers/methanofullerene plastic solar cell

Recent studies have reported that a thin interlayer between poly(3, 4-ethylene dioxythiophene)-poly(styrene sulfonic acid) (PEDOT: PSS) and an emissive polymer layer leads to a large increase in the performances of polymer light-emitting diodes (PLEDs) by preventing significant quenching of the radiative excitons at the PEDOT: PSS interface; therefore, acting as an efficient exciton-blocking layer. Using the similar idea, a thin interlayer was fabricated between PEDOT: PSS and the active layer of conjugated polymers/methanofullerene composites in a plastic solar cell. The interlayer consisted of a poly(fluorene)-based hole transporter spin-coated directly on top of the PEDOT: PSS layer. The devices with the interlayer exhibited a higher efficiency than in those without the interlayer.     

The distribution of nutrient elements in cell wall and other fractions of the herbage of some grasses and legumes

The distribution of 10 nutrient elements was assessed in three fractions of herbage samples of perennial ryegrass, tall fescue, white clover and lucerne. The cell wall fraction, prepared by mechanical disintegration of undried material, contained the following proportions of the total herbage content of the major elements: N, 2.9–16.4%; P, 3.0–6.9%; S, 3.6–17.2%; Ca, 11.3–51.8%; Mg. 6.4–27.6% and K, 0.1–1.7%. Substantial though more variable proportions of the trace element cations, Fe, Mn, Zn and Cu were also present in the cell wall fraction. The extent to which the elements were soluble in water was assessed by analysis of the water-insoluble fraction prepared from freeze-dried samples of each herbage. The proportions of the total herbage content of the major elements soluble in water were: N, 30–57%; P, 80–92%; S, 35–71%; Ca, 48–69%; Mg. 65–83% and K, 90–96%. With the trace element cations the proportions soluble in water were more variable, though they were generally less than 70% of the total. The extent to which the various elements were soluble in 80% aqueous ethanol was assessed by analysis of the insoluble fraction prepared from freeze-dried materials. With each of the major elements, smaller proportions of the total herbage content were soluble in 80% ethanol than in water, which may reflect in part the lower solubility of proteins and pectin. With the trace element cations, the differences in solubility between 80% ethanol and water were generally small and inconsistent.