Characteristic Investigation of Nano-Crystal Hydrogen Storage Alloys

A Ml (NiCoMnA1)5 hydrogen storage alloys was prepared by double-roller rapid quenching.Its microstructure, electrochemically and kinetic characteristic were studied.A uniform crystal phase with CaCu5 structure could be detected by XRD analyses, whose average grain size is 30 ～ 50 nm and the ratio of c/a of nano-crystal hydrogen storage alloy is larger.The hydrogen absorption/desertion p - C isotherms of alloy show that its fiat-performance is perfect and the magnetic stagnant effect is very little.An simulate cell is used for electrochemical measurement.Electrode is 10C, the capacity decreasing rate via the 450 cycles at 7C is less than 20%.     

An integrated biodesulfurization process,including inoculum preparation,desulfurization and sulfate removal in a single step,for removing sulfur from oils

BACKGROUND: A single‐stage reactor, in which the growth of bacterial culture, induction of desulfurizing enzymes, and desulfurization reaction are carried out in a single step, was adopted to investigate desulfurization of dibenzothiophene (DBT) at high cell densities. Rhodococcus erythropolis, IGTS8 was used as the biocatalyst. Optimal conditions for bacterial growth and DBT desulfurization were investigated. RESULTS: Optimization of fermentation conditions was necessary to obtain high cell densities including controlling accumulation of acetate. Under optimal operating conditions, the maximum optical density at 600 nm (OD₆₀₀) was measured to be 26.6 at 118 h of cultivation. When biodesulfurization of DBT in model oil with a high cell density culture of IGTS8 was investigated, accumulation of sulfate was found to limit the extent of desulfurization. A sulfate removal step was added to obtain a single‐stage integrated biodesulfurization process. Sulfate removal was achieved via an aqueous bleed stream and use of a separation unit to recycle the organic phase. CONCLUSION: A proof of principle of a complete system capable of biocatalyst growth, induction, desulfurization and by‐product separation was demonstrated. This system enables simplification of the biodesulfurization process and has potential to lower the operating cost of the bioprocess. Copyright © 2008 Society of Chemical Industry     

利用Love波特性计算地基动力响应

本文利用Love波弥散特性在频域上对地基出平面振动及扭振问题进行了研究。在计算区域内结构将采用有限单元划分,而在边界上则根据Love 面波特性使用传递边界有限单元。本文同时讨论了不同模态波对结构动力响应的贡献。本文方法也适合于静力分析。     

混流,定浆式转轮特性参数的计算机处理

本文根据混流、定浆式转轮特性多数的特点建立了一种能将高维特性多数用一个具有二阶连续导数且保形的函数给予表达的方法，它的精度高，且能方便生成满足各种用途的特性曲线。     

水泵水轮机的数值模拟及其应用

采用足够小的直线段拟合机组全特性曲线平直部分，采用二次多项式拟合机组全特性曲线弯曲部分，推导了有关方程，并对模拟的方程进行了处理，编制了较通用的计算机程序，利用该计算机程序对我国蒲石河抽水蓄能电站进行了计算分析，计算结果表明：该计算机程序计算速度较快、计算准确度较高，提出的水泵水轮机的数值模拟方法具有实用价值．     

特征线法分析长距离输油管道的流动瞬变过程

本文建立了基于特征线方法求充动瞬变过程的数值模型，编制了针对长距离输油管道流动瞬变过程的分析软件。在数值处理上，Ｄａｒｃｙ＝Ｗｅｉｓｂａｃｈ摩擦力项用二阶精度格式来近似，因此保证了高粘度流体在流动瞬变过程分析时的计算稳定性和精确度。模型考虑了埋管地形对沿线瞬变压力的影响，当某一泵站发生水击后其它站的反应同其上控程序确定。应用该软件，分析模拟了某一长距离输油管道在中间泵站停电或末站瞬时关阀情况下的流     

谈中国特色的信息化道路

论述了我国在信息化道路上要正确处理如信息技术与信息资源等的四个关系，同时强调推进信息化要关注中国国情的9个特点。     

新器件条件下对行输出级电路计算公式的修正与补充(Ⅵ)

当彩色显示器使用初级线圈电感量L_P较小的新逆程变压器时,流过饱和导通行输出管的集电极电流I_(CP),不但包括偏转线圈L_Y中的正向锯齿波电流I_(YCP),还有不能忽略的FBT初级线圈中的正向锯齿电流I_(FCP),即CGA卡时峰值电流I_(CP)(6.1A)=I_(YCP)(3.9A)+I_(FCP)(2.2A)。因此有必要对行输出级电路的电流计算公式作相应的修正和补充。     

一种8毫米波变张角,半径突变多模圆锥馈源

我们研制了一种8毫米波变张角、半径突变的多模圆锥馈源。计算出其模比并推导出其辐射方向图公式;给出其在两个主平面——E平面与H平面上的辐射方向图和波束场分布特性的测试结果以及电压驻波比VSWR的测量结果;同时给出频带和旁瓣特性。分析与测试共同表明,在34.5GHz～37GHz频带里,该多模馈源的辐射图在大于24dB范围内获得幅度等化且不出现旁瓣,因此具有一定的应用价值。