平面波谱法分析电磁波在管道中的传播

通过分析电磁波从管道开口耦合进入管道的绕射机理及场在腔体内的射线特征，将进入管道的绕射场展开为平面波谱，利用平面波在自由空间的传播特性分析了电磁波沿管道的传输和反射特征。通过算例验证了该算法的有效性。     

弱导光纤的标量衍射光束特性分析

仿照罗兰圆光学系统构造罗兰球光学系统 ,在罗兰球中简化电磁波的瑞利 索末菲标量衍射积分公式 ,推导出折射率阶跃分布的弱导光纤LP模衍射场分布和空间频谱的计算公式。提出LP0 1模远场衍射分布存在类似于平面波圆孔夫琅禾费衍射艾里斑的中央亮斑概念 ,并给出中央亮斑角半宽度的计算公式。     

PbZr0.52Ti0.48O3薄膜红外椭圆偏振光谱研究

用磁控溅射法在Pt/Ti/SiO2 /Si衬底上制备了PbZr0 .52 Ti0 .4 8O3(PZT)薄膜 .XRD结果表明经过退火后的PZT薄膜呈现多晶结构 .通过红外椭圆偏振光谱仪测量了λ为 2 .5～ 12 .6 μm范围内PZT薄膜的椭偏光谱 ,采用经典色散模型拟合获得PZT薄膜的红外光学常数 ,同时拟合得到未经处理的PZT薄膜和退火后PZT薄膜的厚度分别为 45 4.2nm和 45 0 .3nm .最后通过拟合计算得到结晶PZT薄膜的静态电荷值为 |q|=1.76 9± 0 .0 2 4.这说明在磁控溅射法制备的PZT薄膜中 ,电荷的转移是不完全的 .     

STUDY ON PHASE PERCEPTION IN SPEECH

The perceptual effect of the phase information in speech has been studied by auditory subjective tests. On the condition that the phase spectrum in speech is changed while amplitude spectrum is unchanged, the tests show that: (1) If the envelop of the reconstructed speech signal is unchanged, there is indistinctive auditory perception between the original speech and the reconstructed speech; (2) The auditory perception effect of the reconstructed speech mainly lies on the amplitude of the derivative of the additive phase; (3) td is the maximum relative time shift between different frequency components of the reconstructed speech signal. The speech quality is excellent while td <10ms; good while 10ms< td <20ms; common while 20ms< td <35ms, and poor while td >35ms.     

自适应RBF神经网络在CDMA移动通信上行链路功率控制中的应用研究

提出了一种自适应RBF神经网络功率控制方案。详细研究了该网络在DS-CDMA通信中，进行上行链路闭环功率控制(基于信扰比(SIR))的应用理论，给出了该网络参数的计算方法。最后用计算机仿真法模拟出该控制器的运行性能。结果表明基于SIR的自适应RBF神经网络功率控制器能自适应地调整移动台的发射功率，使基站接收信号的信扰比始终非常接近于一个常数，且有比定步长功率控制更小的SIR跟踪误差，从而可以降低接收信号的中断概率、提高信道容量。     

用RAFA方法定量解析芳烃混合物的EEM

本文介绍了降秩因子分析(RAFA)方法,它是从一个多组分混合物中直接定量计算其中某一组分,而不必知道其它组分的物种及含量的一种定量分析的数学方法。它适用于双线性的数据。本实验首先将荧光分光光度计与外接计算机相连,以获得样品的激发-发射矩阵(EEM),再用RAFA方法对蒽、萘、菲、芘、芴、(艹屈)六种标样的一至五组分的混合物进行定量分析,获得满意的结果。     

3-D gust effect factor for slender vertical structures

Original studies on gust factor buffeting dealt with the alongwind displacement of structures. Research on this topic carried out since the nineties followed two distinct lines: the first determines the maximum effects due to the alongwind response; the second extends the original method from the alongwind response to crosswind and torsional responses. This paper represents the junction point of these research lines with reference to cantilever slender vertical structures. It derives the most relevant effects associated with the three-dimensional (3-D) wind-excited response of this structural type and shows that a suitable definition of one non-dimensional quantity, referred to as the 3-D gust effect factor, provides such effects at any level through a wide set of experimental, numerical and analytical procedures. A new definition of a 3-D equivalent static force consistent with this method is also introduced and critically compared with previous analogous statements.     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

半导体激光器用铷D2线光电流谱稳频

本文报导了用铷原子７８００Ａ光电流谱来稳定半导体激光器的工作，在光电流谱线的中部发现了有利于稳频的凹陷，将半导体激光器频率锁定在凹陷的中央，估算的频率稳定度为１ＭＨｚ。     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。