Effect of Rare Earth Elements on Thermal Fatigue Property of Low Chromium Semi-Steel

The effect of rare earth elements on eutectic carbide‘s morphology of low chromium semi-steel in as-cast state and after heat treatment was investigated, and accordingly, the thermal fatigue property of this material was studied. The results show that RE can improve the eutectic carbide‘s morphology, inhibit the formation and propagation of thermal fatigue cracks, therefore, promote the thermal fatigue property, which is more noticeable in case of the RE modification in combination with heat treatment. The optimal thermal fatigue property can be obtained when treated with 0.2% RE modification as well as normalization at 950℃ for 3h.     

特钢长型材轧制技术新进展

在可持续发展原则指导下，强化控轧控冷、高精度轧制和改进表面与外形质量是当前特钢轧制技术发展的重点。     

60Si2Mn(A)弹簧钢的脱氧工艺

为了提高60Si2Mn(A)弹簧钢的质量,在LF精炼中进行了不同脱氧工艺的脱氧试验。结果表明:采用铝预脱氧、钡合金终脱氧及夹杂物变性脱氧工艺可使弹簧钢的氧含量降低到15×10-6以下,氧化物夹杂中Al2O3的比例小于40%。     

一种矿山用钢筋网自动化焊接生产线的设计

设计一条钢筋网自动化焊接生产线，包括经料送料平台、纬料自动分料及上料机构、多点电阻点焊机、接料平台、卸料机械手。从上料到出料依靠电机、汽缸之间的协调工作来实现。并由单片机和PLC实现控制功能，上位机用MCGS组态软件在整个过程监视现场，采集工作状态及参数，起到监控作用。     

钢水化学热法升温技术的研究

依据热力学原理，用计算机计算了某些元素与合金的氧化热效应。综述了各种上化学热法升温技术的应用效果。分析讨论了发热剂的类型，升温速度和热效率问题等。     

化学模式识别法在钢铁工业中的若干应用

本文涉及一种崭新的非函数数据处理法及其在工业诊断和优化中的应用。并对其进行要因分析和优化决策的原理作了介绍。结合钢铁工业生产中的实例进行了分析。还探讨了该方法在钢铁工业中应用的意义。     

Structural modelling of coprecipitated VTiO catalysts

A statistical study of the particle shape and size of pure V₂O₅ and TiO₂, and samples of coprecipitated V₂O₅---TiO₂ catalysts with different V/Ti ratios, has been performed. They were also characterized by XRD, EDAX, SEM and XPS. The results showed that pure vanadium pentoxide is compose by large square or needle-shaped particles, while pure titanium dioxide has small and rounded ones. VTiO samples presented an area and shape, depending on the V/Ti ratio.

These results and the spectroscopical characterization conducted to a particle model of the catalysts. Those VOTi samples with high V/Ti ratio would have large V₂O₅ crystals acting as support of a V/TiO₂ solid solution. In contrast, those samples with a low V/Ti ratio, would have the solid solution supporting vanadium pentoxide crystals.     

X荧光光谱法测定不锈钢的研究

本文论述了Ｘ荧光光谱测定高铬钢和不锈钢的分析方法，用理论α系数校正基体效应和用谱线干扰系数Ｌ校正谱线重叠影响。方法准确度和精度令人满意，操作十分简便、快速。     

大面积硅锂漂移探测器制备及其性能

制备了大面积硅锂漂移探测器,其性能为:探测器的灵敏面积123.6 cm~2;灵敏层深度2 mm;在室温和300 V反向偏压的工作条件下漏电流小于20 μA;对~(241)Am 5.486 MeV α粒子的能量分辨(FWHM)为77.67 keV。