Data requirements for neutron activation: Part I: Cross sections

Existing neutron cross section libraries such as EAF-2003 contain a large number of reactions. Of these only a small proportion are significant in the production of the nuclides that dominate activation quantities such as activity or γ-dose rate at various decay times. These reactions were identified in a recent extensive set of calculations on all the elements and reported in the ‘Activation Handbook’. These 1340 reactions are considered here and the set of reactions with no differential or integral data are listed and prioritised. A set of 339 reactions with very limited possibility of measurement are given; these require further study by theoretical calculations. A set of 100 reactions with either discrepant or no data, that might be measurable are listed and are recommended to be the subject of future experimental work.     

三峡水库安坪库岸段斜坡破坏机制及稳定性评价

基于斜坡的工程地质测绘和实验室分析,总结了研究地段区域滑坡规律,引入粘弹性基础板的弯曲破坏原理,对该地段斜坡破坏机制进行分析。从岩体本身的质量和岩体在地球内外营力作用下所表现的自稳性两方面考虑,采用两级模糊综合评判理论对测区进行斜坡稳定性工程地质单元划分,并利用刚体平衡理论验证模糊评判结果。     

Analysis of frictional energy dissipation on an annular surface with harmonic loading

Metallic mating surfaces in structural joints offer a good source of frictional energy dissipation resulting in a damped dynamic structural response. This paper reports the results of experiments where the energy dissipation per cycle occurring at a preloaded flat metallic annular interface subjected to cyclic tangential forces is measured. The effects of certain pertinent joint variables on this frictional energy dissipation are investigated by the application of Response Surface Methodology. A central composite rotatable design was utilized for developing empirical expressions for energy loss. The methodology presented suggests a useful technique for tribological research.     

煤气管道膨胀节腐蚀和在线包焊技术应用

简单分析了高炉煤气中Cl元素的存在对不锈钢膨胀节的应力腐蚀问题和防止途径，作为一种临时性的防范措施，简要介绍了煤气膨胀节包焊实施步骤和措施。     

用EGS4分析9MeV行波直线加速器屏蔽系统

采用了国际上广泛使用的ＭｏｎｔｅＣａｒｌｏ模拟计算程序ＥＧＳ４对海关集装箱检测系统用加速器屏蔽系统进行了辐射模拟分析，与实际测试数据进行分析、比较，解释了特殊剂量分布的原因，提出了系统改进的参考方案。     

EXL能谱仪薄样品X线的定量分析

研究了Link公司能谱仪中RTS软件（薄膜定量分析软件）可靠性及适用性。实验结果表明：RTS软件定量分析结果误差较小。但对C、N、O等轻元素定量分析，试样厚度小于1500以下时，结果才比较可靠。     

10MeV中子引起的~（238）U，~（209）Bi，Fe和~9Be的次级中子

１０ＭｅＶ中子引起的￣（２３８）Ｕ，￣（２０９）Ｂｉ，Ｆｅ和￣９Ｂｅ的次级中子双微分截面测量祁步嘉，唐洪庆，周祖英，周陈维，沈冠仁，柯尊建，孙振强，夏海鸿（中国原子能科学研究院核物理所，北京２７５－４６信箱，１０２４１３）次级中子双微分截面是核工程设...     

强力输送带接头识别算法

针对现有的强力输送带故障实时检测方法存在故障定位困难的问题,以接头为基准参考点,提出了一种基于图像处理技术的强力输送带接头识别算法。该算法根据接头点的特征,把接头点用一个数值表示出来,并根据这个数值,以一种简单的方式区分出上、下接头点;然后根据接头的特征,并通过修改最长公共子序列算法的匹配方式,对接头进行识别。实际应用表明,该算法精度高、速度快,可有效识别强力输送带的接头,满足了强力输送带故障检测中接头定位的要求。     

提高钻杆接头冲击功的工艺方法

针对石油钻井关键产品高强度钻杆接头的使用要求,在保证强度指标要求非常高的前提下,研究摸索增加高温正火后再调质的工艺方法,以改善接头材料原始微观带状组织和纤维结构,细化晶粒,提高钻杆接头的冲击功,使该产品力学性能达到API标准的要求。