An enhanced,acoustic emission-based,single-fiber-composite test

In the single-fiber-composite (SFC) test, a fiber imbedded in a matrix is loaded in tension, resulting in a fragmentation of the fiber. In the conventional version of this test, the final fiber fragmentation length distribution is used with a micro-mechanical model to determine the average fiber/matrix interfacial shear stress. In the enhanced version of this test, one also determines the applied stress at each fiber fracture, and from this, one can evaluate the strength of the fiber at short gage lengths. In our measurement system, we utilize an acoustic emission (AE) technique to detect the fiber fractures and to locate the fiber breaks and so determine both the fiber failure stresses as well as the fiber fragmentation lengths while the test is in progress. Critical to the success of this test is a broadband AE system that utilizes point-like AE sensors, procedures for evaluatingin situ, the wavespeed of the first wave arrival and signal processing techniques for determining the arrival time of this signal as precisely as possible for a broad range of wave shapes. Here we describe the application of such an enhanced SFC test procedure to investigate the failure of a Nicalon fiber in an epoxy matrix.     

基于压缩感知的无线传感器网络的数据编码

近年来,基于压缩感知的无线传感器网络数据编码的研究取得了一定的进展,但大部分研究是基于"单跳"的传输模型或者没有考虑网络内节点之间的合作。本文提出了一种基于压缩感知和分簇的传感器网络数据编码方法。首先,节点根据自己的编号伪随机的产生一个M维的列向量,把感知的数据xi投影到此向量上,然后把自己的编号和投影的数据一同传输给簇头。簇头把收到的数据进行求和,并且把计算后的结果传送给下一个簇头,直到sink节点。通过仿真实验和理论分析,验证了本文提出的方法比传统的方法能更好地减少网络内数据传输量。     

动态移位显示屏的设计

以8×8点阵为基础,设计了一个动态移位显示屏。全屏由20块8×8点阵LED显示模块组成,显示采用动态显示,使文字或图形能实现静止、移入移出等多种显示方式。文中详细介绍了LED点阵显示的显示原理、硬件设计和软件设计。     

具有随机丢包的网络化多自主体系统的一致性

研究具有随机丢包的网络化多自主体系统的均方一致性问题,其中不同自主体间的通信通道具有相同的丢包情况并且均服从马尔可夫(Markov)分布。首先,利用系统变换和迭代方法,得到了系统达到均方一致的一个初等充要条件。然后,利用矩阵理论和图论知识,如果拓扑图含有有向生成树,则可以将系统的均方一致性转化成一个线性Markov跳变系统的均方稳定性,并且可以建立线性矩阵不等式形式的均方可镇定准则。最后,通过相应的仿真实例说明了所得结论的可行性。     

线性矩阵方程异类约束最小二乘解的迭代算法

多矩阵变量线性矩阵方程(LME)约束解的计算问题在参数识别、结构设计、振动理论、自动控制理论等领域都有广泛应用。本文借鉴求线性矩阵方程(LME)同类约束最小二乘解的迭代算法,通过构造等价的线性矩阵方程组,建立了求多矩阵变量LME的一种异类约束最小二乘解的迭代算法,并证明了该算法的收敛性。在不考虑舍入误差的情况下,利用该算法不仅可在有限步计算后得到LME的一组异类约束最小二乘解,而且选取特殊初始矩阵时,可求得LME的极小范数异类约束最小二乘解。另外,还可求得指定矩阵在该LME的异类约束最小二乘解集合中的最佳逼近解。算例表明,该算法是有效的。     

线性系统的H2/H-故障检测优化方法设计

针对一类具有未知扰动的线性系统的故障检测(FD)问题,通过对系统进行重构,设计出了系统的H2/H-优化FD观测器。利用构造的Lyapunov函数和线性矩阵不等式,证明并给出了FD观测器有解的充分条件和优化设计方法。所设计的观测器使系统具有渐近稳定性,抑制干扰能力强,满足所给的范数指标。仿真结果验证了所设计方法的有效性。     

Hesperidin Promotes Osteogenesis and Modulates Collagen Matrix Organization and Mineralization In Vitro and In Vivo

This study evaluated the direct effect of a phytochemical, hesperidin, on pre-osteoblast cell function as well as osteogenesis and collagen matrix quality, as there is little known about hesperidin’s influence in mineralized tissue formation and regeneration. Hesperidin was added to a culture of MC3T3-E1 cells at various concentrations. Cell proliferation, viability, osteogenic gene expression and deposited collagen matrix analyses were performed. Treatment with hesperidin showed significant upregulation of osteogenic markers, particularly with lower doses. Mature and compact collagen fibrils in hesperidin-treated cultures were observed by picrosirius red staining (PSR), although a thinner matrix layer was present for the higher dose of hesperidin compared to osteogenic media alone. Fourier-transform infrared spectroscopy indicated a better mineral-to-matrix ratio and matrix distribution in cultures exposed to hesperidin and confirmed less collagen deposited with the 100-µM dose of hesperidin. In vivo, hesperidin combined with a suboptimal dose of bone morphogenetic protein 2 (BMP2) (dose unable to promote healing of a rat mandible critical-sized bone defect) in a collagenous scaffold promoted a well-controlled (not ectopic) pattern of bone formation as compared to a large dose of BMP2 (previously defined as optimal in healing the critical-sized defect, although of ectopic nature). PSR staining of newly formed bone demonstrated that hesperidin can promote maturation of bone organic matrix. Our findings show, for the first time, that hesperidin has a modulatory role in mineralized tissue formation via not only osteoblast cell differentiation but also matrix organization and matrix-to-mineral ratio and could be a potential adjunct in regenerative bone therapies.     

绳牵引刚柔式波浪补偿并联机构的设计与建模

为了减少海上集装箱货物运输中风浪造成的损坏,提出刚柔混合驱动主动式波浪补偿并联机构. 基于刚柔混合并联机构的动定平台的矩阵旋转原理和几何封闭法建立位置逆解数学模型;利用空间几何原理构建机构位置正解数学模型;利用求导法则对位置逆解进行求导,建立速度雅可比矩阵与加速度的二阶影响矩阵;基于绳子是柔性变形体推导出系统刚度矩阵,探究影响系统刚度的因素和增加系统刚度的原则. 利用数值模拟仿真对运动学和系统刚度进行验证,结果表明位置正逆解的输入输出误差不超过实际误差的2.25%;发现理论仿真曲线和样机仿真曲线较吻合,误差不超过7.4%,验证了运动学模型的正确性;根据刚度矩阵发现刚度影响因素对系统刚度的影响规律. 通过对绳驱动刚柔混合驱动波浪补偿并联机构的实验验证,发现该机构的补偿效果均高于90%. 证明研究结果为刚柔混合主动式波浪补偿并联机构的运动和机构设计提供了理论支持.     

Study on diffusion welding SiCp/ZL101 with Cu interlayer

Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame-ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were putforward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron mi-croscope in order to study the relationship between the macro-properties of joint and the microstructure.The results showthat diffusion welding with Cu interlayer could be used for welding aluminum matrix composites SiCp/ZL101 successfully.     

冲压-刚度的耦合仿真分析技术

提出冲压——刚度的耦合仿真方法，即用动力显式算法计算冲压，静力隐式算法计算回弹，用动力显式算法计算最终的刚度，给出耦合仿真过程中3个环节的实施过程及其关键技术点。应用本方法对双曲率的盒形件进行了刚度仿真分析，并和试验结果进行了比较，取得了令人满意的计算精度。