Effect of austenite stability on the pitting corrosion resistance of cold worked stainless steels

The influence of cold rolling on the pitting resistance of stainless steels is investigated with respect to the austenite stability. A maximum in pitting initiation frequency for 20% reduction is confirmed whatever the austenite stability, but the value of this maximum fairly correlates to the amount of deformation-induced martensite. A direct influence of dislocations piling-up and an indirect role of martensite as a pile-up stabilizer is postulated. In the potentiostatic regime, cold work is shown to lower the repassivation ability and to increase the number of stable pits. Then, addition of alloying elements (such as copper) affects the pitting resistance not only for chemical but also for mechanical reasons (such as their effect on the staking fault energy and austenite stability), confirming the decisive role of microstructure in pitting corrosion of industrial alloys.     

Unconstrained springback behavior of Al-Mg-Si sheets for different sitting times

In this work, the springback behavior of the commercial 6022 aluminum alloy in temper aging (T4) is investigated taking into account that the sheets, prior to deformation process, are initially pre-strained and then submitted to various sitting times at room temperature. The unconstrained cylindrical bending test based on the NUMISHEET2002 proceedings as presented by Yoon et al. [Yoon JW, Pourboghrat F, Chung K, Yang DY. Springback prediction for sheet metal forming process using a 3D hybrid membrane/shell method. International Journal of Mechanical Sciences 2002;44:2133-53] is selected as validation benchmark. For finite element simulations, the geometry is modeled by solid-shell finite elements using the formulation of Alves de Sousa et al. [Alves de Sousa RJ, Yoon JW, Cardoso RPR, Fontes Valente RA, Grácio JJ. On the use of a reduced enhanced solid-shell (RESS) element for sheet forming simulations. International Journal of Plasticity 2007;23:490-515; Alves de Sousa RJ, Cardoso RPR, Fontes Valente RA, Yoon J-W, Natal Jorge RM, Grácio JJ. A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: Part I—Geometrically linear applications. International Journal for Numerical Methods in Engineering 2005;62:952-77; Alves de Sousa RJ, Cardoso RPR, Fontes Valente RA, Yoon JW, Grácio JJ, Natal Jorge RM. A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: Part II—Nonlinear applications. International Journal for Numerical Methods in Engineering 2006;67:160-88]. The material behavior is described based on the work of Correia et al. [Correia JPM, Simões F, Gracio JJ, Barlat F, Ahzi S. A simple hardening rule accounting for time-dependent behavior in Al-Mg-Si alloys. Materials Science Engineering A 2007;456:170-9]. The results of conducted experiments and numerical simulations are compared. It can be concluded about the good agreement between experiments and simulations attesting the effectiveness of the material model utilized to describe the time-dependent hardening behavior.     

GENE TECHNOLOGY FOR INDUSTRIAL YEASTS

Yeast genetics is now available as a practical tool for the development of brewing industry practices. The contribution of Brewing Research Foundation work (1978–84) to recent advances is illustrated by the construction of brewing strains with superattenuating (amylolytic) or anti-contaminant properties. Approaches based on hybridisation (by rare mating) or recombinant DNA technology have been evaluated. Techniques developed for (i) gene transfer to brewing strains, (ii) ensuring stable inheritance of novel characteristics and (iii) exploiting the secretory ability of yeast strains, can be widely applied not only with brewing, distilling, baking or wine yeasts, but also in the use of yeasts to produce novel biotechnical products. ‘Spin-off’ from these studies includes valuable methods for differentiating or enumerating wild yeasts in brewery quality control.     

土体的压实能耗和合理压实度要求

推导了土体在压实过程所需施加的能量,分别在线性和非线性条件下给出了土体压实能耗的表达式,并进行了具体的计算分析和比较。分析结果以及一些计算数据表明在高密阶段,土体的进一步压实将引起能耗的急剧增加,因此,对提高压实度的要求一定要慎重.并认为如何确定一个合理的压实度要求,还需要做大量的试验研究.     

Case study of safe lowering of an in service gas pipeline

This paper describes an experimental investigation carried out involving instrumentation, measurement and monitoring of stresses in a large diameter gas pipeline during its lowering operations. It also highlights the ingenious techniques developed and adopted to overcome the difficulties pertaining to long leadwires, measurement of existing strains on the curved surface of a pipeline and protection of strain gauge installations. These novel methods were used to ensure smooth and proper functioning of strain gauge instrumentation even under the severe field conditions at site for more than two weeks, till the lowering operations and pipeline monitoring was successfully completed.     

The calibration of CERL-Planer capacitance strain gauges

CEGB-Planer capacitance strain gauges are used extensively for monitoring the deformation of components operating in the creep range. However, there are significant differences between the way the gauges are installed for use and the way they are installed for calibration. This paper describes the various types of calibrations that have been carried out to identify the errors associated with these differences and the results show that, providing the manufacturers' recommendations are adhered to, the errors are acceptably small.     

The performance of CBN tools in the machining of titanium alloys

Advancements in the aerospace, nuclear and other industries require the enhanced in-service performance of engineering components. These requirements have resulted in the large scale development and use of heat-resistant and high-strength materials such as titanium alloys, which pose considerable machining problems. In this study on machining of titanium alloy using CBN tools, the machining performance was evaluated in terms of cutting force, specific cutting pressure, cutting temperature, chip strain and surface finish.     

Strain-life fatigue predictions for sintered steels with nonzero mean stress

Several approximate models have been utilized for fatigue life prediction. Some of these models are available for mean stress (or strain) correction on fatigue life, when nonzero mean stress (or strain) is applied. In this paper, the most commonly used empirical strain-life models for fatigue life predictions, for materials subjected to variable amplitude loads, are described. Experimental results of fatigue tests, where the specimens of sintered steels were subjected to partial random loads, are presented and compared with those results obtained theoretically by the models. The utilization of the various models and their influence on results are discussed.     

Characteristics of surface roughening during plane strain compression of polycrystalline iron

Roughening behavior of the free surface of polycrystalline iron during plane strain compression is investigated experimentally. The changes in the shape of the free surface, which is roughened during plastic deformation, are observed in the three-dimensions. It is found that the mountains and the valleys of the roughened shape tend to elongate in the constrained direction for the specimen with isotropic grain shape. The shapes of the roughness curves in the loading direction and in the constrained direction are compared. The normalized height distribution of the roughness curve in the constrained direction is symmetric, while that of the roughness curve in the loading direction is asymmetric and positively skew during plane strain compression. Based on a simple simulation of the roughness curves by a random midpoint displacement method, this difference is supposed to be caused by the constraint of the material flow under plane strain condition.     

PMMA‐multigraft copolymers derived from linseed oil,soybean oil,and linoleic acid: Protein adsorption and bacterial adherence

Synthesis of Poly(methyl methacrylate), PMMA‐multigraft copolymers derived from linseed oil, soybean oil, and linoleic acid PMMA‐g‐polymeric oil/oily acid‐g‐poly(3‐hydroxy alkanoate) (PHA), and their protein adsorption and bacterial adherence have been described. Polymeric oil/oily acid peroxides [polymeric soybean oil peroxide (PSB), polymeric linseed oil peroxide (PLO), and polymeric linoleic acid peroxide (PLina)] initiated the copolymerization of MMA and unsaturated PHA‐soya to yield PMMA–PLO–PHA, PMMA–PSB–PHA, and PMMA–PLina–PHA multigraft copolymers. PMMA–PLina–PHA multigraft copolymers were completely soluble while PMMA–PSB–PHA and PMMA–PLO–PHA multigraft copolymers were partially crosslinked. Crosslinked parts of the PLO‐ and PSB‐multigraft copolymers were isolated by the sol gel analysis and characterized by swelling measurements in CHCl₃. Soluble part of the PLO‐ and PSB‐multigraft copolymers and completely soluble PLina‐multigraft copolymers were obtained and characterized by spectroscopic, thermal, gel permeation chromatography (GPC), and scanning electron microscopy (SEM) techniques. In the mechanical properties of the PHA–PLina–PMMA, the elongation at break is reduced up to ～ 9%, more or less preserving the high stress values at its break point (48%) when compared to PLina‐g‐PMMA. The solvent casting film surfaces were studied by means of adsorption of blood proteins and bacterial adhesion. Insertion of the PHA into the multigraft copolymers caused the dramatic increase in bacterial adhesion on the polymer surfaces. PHA insertion into the graft copolymers also increased the protein adsorption. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007