彩色PDP用玻璃基板

本文讨论了彩色ＰＤＰ现用钠钙玻璃的热稳定性，指出由于这种玻璃在热处理过程中易变形和收缩，因而不适合作大面积彩色ＰＤＰ基板材料，介绍了彩色ＰＤＰ基板玻璃的制造方法和特点。最后介绍了日本旭硝子公司和美国康宁公司各自为彩色ＰＤＰ新开发的玻璃基板材料ＰＤ２００和ＣＳ２５。     

Strain analysis of moving objects using a Fourier transform grid method

There is no good method to measure the shape and the strain distributions of a structure changing with time. We have previously proposed the Fourier transform grid method (FTGM) to measure the three-dimensional shape and surface strain distributions of stationary objects by analysing the two-dimensional grating images recorded with two cameras. In the stereoscopic method, it is very important to determine the accurate geometric parameters of the camera system. In this paper, the positions and the directions of cameras are accurately determined using the FTGM applied to images of a reference object on which a two-dimensional grating is drawn. Applications for analysing shape and strain distributions of vibrating rubber plates and a moving human skin are shown.     

Strength of Metals at High Strain Rates

Results of metal testing in impact tension–compression and indentation are analyzed. As the analysis of these data demonstrates, the strength of metals increases greatly with strain rates and at moderate indentation rates. At high indentation rates, a decrease in the specific energy (per unit volume of a displaced material) necessary for the formation of a conical cavity was observed. The account of the effects of viscosity, temperature increase upon plastic deformation and its localization can be used to explain the above phenomena.     

Time and Temperature Factors in Construction of Rock Strength Criteria

Using the synthesis of the kinetic concept on solid strength and the Coulomb - Mohr strength theory as the base, the failure conditions taking into account the time and temperature factors are obtained.     

An investigation of the relation between the temperature dependences of the initial unbalance and the output signal of resistance strain sensor bridge circuits

The relation between the initial unbalance and the output signal of bridge circuits when acted upon simultaneously by the physical factor being measured and the temperature of the surroundings when the bridge is supplied from a voltage or current source is investigated. Analytic relations are obtained which explain the temperature dependence of the useful output voltage under external physical action. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 48–49, 2007.     

Family-Responsive Interventions, Perceived Organizational and Supervisor Support, Work-Family Conflict, and Psychological Strain.

This study examined organizational family-responsive policies, perceptions of the organization as family supportive, and supervisor support as issues that may be salient to the experience of conflict between paid employment (work) and family roles. Data were collected from 355 managerial personnel in New Zealand. Although work-family conflict and psychological strain were strongly linked, the availability of organizational policies had no significant association with levels of conflict or strain, whereas policy usage was related only to work-to-family interference and not to family-to-work interference. On the other hand, perceptions of the organization as family supportive and supervisor support for work-family balance displayed significant relationships with key variables, highlighting the importance of these variables for interventions designed to ameliorate the negative impact of work-family conflict on managerial well-being. Implications for the effective implementation of family-responsive interventions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

利用预曝光技术制备复合结构光纤光栅传感器

报道利用预曝光技术制备的复合结构光纤光栅传感器。提出利用预曝光技术使某一小段光纤的折射率变大,而后在预曝光部分和未曝光部分的交接处一次性写入光栅,即可得到具有两个透射峰的透射谱。实验研究了该复合结构光纤光栅在温度和应力传感上的应用。实验结果表明,利用该复合结构光纤光栅可以实现温度与应变的同时测量。     

First Harmonic (2f) Characterisation of Resonant Frequency and Q-Factor of Micromechanical Transducers

In this paper, the response to the first harmonic component (2f) of the electrostatic force in single terminal driven electrostatic comb-drive and parallel-plate drive was used as a signal to extract device parameters, namely, the Q-factor and resonant frequency instead of the fundamental (1f) resonance response. It is shown that the difficulty in motional measurement due to electrical cross-talk (parasitics) using 1f measurement can be overcome with a higher signal-to-noise ratio of the 2f signal. Both atmospheric (low-Q) and reduced pressure environment were investigated using off-chip electronics and lock-in amplifier. The measurements were done on the electrostatic comb-drive and capacitive parallel plate sensing plates that form the two core modules of a yaw rate sensor (dual-axis resonator). The effects of AC and DC bias voltages on the measured response have been investigated. Experimental amplitude and phase response data have been analysed using the Lorentzian curve-fit, Resonance Curve Area (RCA) method, the half-power bandwidth method (3 dB) and the Nyquist plot for data fitting and determination of the Q-factor and resonance frequency.     

A study of the large strain deformation and failure behaviour of mixed biopolymer gels via in situ ESEM

A mixed biopolymer gel, consisting of a protein (gelatin) and polysaccharide (maltodextrin) mixture has been investigated. By controlling the composition it was possible to construct an ‘emulsion-like’ structure, with included spherical particles of one phase (maltodextrin) within a continuous matrix of the second (gelatin). Large strain deformation and failure behaviour of this system has been examined via in situ environmental scanning electron microscopy (ESEM). ESEM has been employed to explore the changes in the structure of the material, whilst allowing the sample to stay hydrated as it was subjected to tensile strain, thereby allowing simultaneous imaging and determination of stress-strain data of the native sample. Ductile behaviour was observed, which has been attributed to the stretching, tearing and fracture of gelatin ligaments and debonding at the interface between the maltodextrin particles and continuous gelatin matrix. Deformation and fracture of the maltodextrin particles during tensile testing was also observed. The interfacial fracture energy of the composite has been calculated following an elastomer composite-debonding model, although there are several limitations to this approach for the mixed gel. It was found in samples tested after different ageing times that the debonding stress and strain was decreasing with ageing leading to a lower interfacial fracture energy. Samples were also tested after successive loading cycles, which resulted in a mechanical strength decrease after each cycle.     

Efficient and accurate approach for powder compaction problems

 In this paper, a new approach for powder cold compaction simulations is presented. A density-dependent plastic model within the framework of finite strain multiplicative hyperelastoplasticity is used to describe the highly nonlinear material behaviour; the Coulomb dry friction model is used to capture friction effects at die-powder contact; and an Arbitrary Lagrangian–Eulerian (ALE) formulation is used to avoid the (usual) excessive distortion of Lagrangian meshes caused by large mass fluxes. Several representative examples, involving structured and unstructured meshes are simulated. The results obtained agree with the experimental data and other numerical results reported in the literature. It is shown that, contrary to other Lagrangian and adaptive h-remeshing approaches recently reported for this type of problems, the present approach verifies the mass conservation principle with very low relative errors (less than 1% in all ALE examples and exactly in the pure Lagrangian examples). Moreover, thanks to the use of an ALE formulation and in contrast with other simulations, the presented density distributions do not present spurious oscillations. Received: 20 March 2002 / Accepted: 15 October 2002 The partial financial support of the Ministerio de Ciencia y Tecnología (grant number DPI 2001-2204) is gratefully acknowledged.