日产1000t水泥熟料生产线的提产措施

通过对五级旋风筒下料管、回转窑转速、配料方案、物料稳定等四方面进行改进,达到提产目的。     

Hydrogen production from methane in a dielectric barrier discharge using oxide zinc and chromium as catalyst

The hydrogen fuel cell is a promising option as a future energy resource; however, the nature of the gas is such that the conversion process of other fuels to hydrogen on board is necessary. Among the raw fuel resources, methane could be the best candidate as it is plentiful. In this experiment, the possibility of producing hydrogen with less carbon formation from methane by a dielectric barrier discharge (DBD) was investigated. Without the addition of a catalyst, the formation of hydrogen reached between 30% and 35% at methane residence time of 0.22 min and supplied powers in the range of 60-130 W. The hydrogen selectivity increased at higher supplied power, but the process efficiency, defined as a ratio of the produced hydrogen to the supplied power, decreased slightly. In order to boost the hydrogen production with less carbon formation, a mixed oxide catalyst of zinc and chromium was added to the reactor. It was shown that the production of hydrogen was ca. 40% higher than the non-catalytic plasma process.     

高温深层缓速酸化优化研究及应用

针对临南油田酸化效果差的问题,从油藏地质特点出发,分析了制约其酸化效果的主要因素,即地层温度、铁离子二次沉淀、地层深部改造等。通过室内研究,优选出一种高性能的缓速酸,该酸液具有溶蚀率高、缓速性能好、能有效防止铁离子二次沉淀、与地层水配伍性好等特点。同时还对酸化施工工艺进行了优化,配套了适合的返排工艺。该工艺在现场应用后,酸化效果得到了明显的改善。     

Constraints on benthic algal response to nutrient addition in oligotrophic mountain rivers

Nutrient availability has long been considered one of the most important factors regulating production of benthic algae in oligotrophic rivers; yet, empirical relationships do not have as wide an application as similar models derived for lentic systems. The aim of this research was to derive empirical relationships between nutrient concentrations and benthic algal abundance and to identify commonalities with other studies to improve our understanding of constraints on algae in oligotrophic rivers. Surveys of physical, chemical and biological attributes of oligotrophic mountain rivers in spring, summer and autumn for 2 years confirmed that small amounts of anthropogenic phosphorus (0.1–5.6 µg/L total phosphorus (TP)) resulted in 4‐ to 30‐fold increases in abundance of benthic algae and benthic macroinvertebrates (BMIs). Algal accrual along a gradient in nutrient availability was not masked by grazing pressure but was positively correlated with abundance of scrapers. Epilithic abundance was highest downstream of anthropogenic nutrient sources in autumn. We concluded that benthic algal abundance in these mountain rivers was weakly correlated with phosphorus availability if light was not limiting but ultimately controlled by temperature and river discharge. Therefore, we recommend more direct measures of nutrient limitation be used to predict changes in ecological integrity at the lower end of the resource gradient. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of nanophase tungsten carbide by electrical discharge machining

Tungsten carbide nanopowders were synthesized successfully by electric discharge machining followed by annealing under a nitrogen atmosphere. The tungsten workpieces were initially melted and evaporated on the working surface during the electric discharge machining process, and then the tungsten powders were reacted with the carbon electrode and the working medium of kerosene to form the nanocrystalline WC_1−x powders. The powders produced were characterized by XRD, SEM, and TEM. When annealing the powders under an N₂ atmosphere, the cubic phases of WC_1−x gradually changed to hexagonal W₂C and then were transformed fully to nanocrystalline hexagonal WC at 1200 °C, with the nanocrystalline tungsten carbide encapsulated in a carbon shell. On the other hand, under an H₂ atmosphere, the WC_1−x phase changed via a W₂C phase to reduced powders of pure tungsten at 1000 °C or were reduced directly from WC_1−x to elemental W.     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

岩石液压致裂中几个问题的研究

论证了流体压力变化与岩石强度变化之间的关系，阐述了流体保持与释放的应力条件和构造环境，总结了两种围岩下的液压致裂模型及其流量方程。     

小型腔式微波离子源的研制

研制了１种用在离子束细胞刻蚀装置中的小型腔式微波离子源，它由石英放电管、同轴谐振腔和封装在管一端的二电极引出系统组成。该源由同轴腔激发起的表面波在石英管内产生等离子体柱。为了提高柱末端等离子体离子引出流密度，选用了在内径７．０ｍｍ直管的一端加上一内径５．０ｍｍ衬管的放电管。在微波频率为２．４５ＧＨｚ，输入功率为９３Ｗ下，氮的引出流密度分别为４８．４ｍＡ／ｃｍ２和９１．７ｍＡ／ｃｍ２。这种表面波放电等离子体源体积小、结构简单，可在较宽的压强范围内产生重复性好、工作稳定的等离子体柱。     

双层辉光离子渗镀钽

介绍了一种新型离子渗镀钽的工艺方法。较好解决了渗镀钽时供给活性钽粒子的总是比方法工艺简单，操作方便，效率高。为充分利用和节约使用昂贵的钽探索了一条实用可行的途径。