SCS模型在山区小流域山洪灾害预报预警中的适用性分析

预报预警是山洪灾害防治中重要的非工程措施,是防灾减灾救灾的关键环节。选取分别代表秦巴山地水资源保护区、西南地震作用区、喀斯特地区、黄土高原超渗产流区、东南沿海台风影响区的湖北省丹江口官山河流域、四川省都江堰白沙河流域、贵州省望谟县望谟河流域、陕西省子洲县岔巴沟流域、广东省高州市马贵河流域这5个典型流域,通过构建改进的SCS模型进行历史山洪模拟,探讨该模型在小流域暴雨山洪预报预警中的广泛适用性。结果表明:基于SCS模型构建的小流域暴雨山洪预报方案中官山河、白沙河、望谟河、马贵河方案均为乙级方案,可用于正式发布预报;岔巴沟为丙级方案,可用于参考性预报。SCS模型在5个典型示范区的洪峰流量预报精度普遍在80%左右,高于我国山洪灾害洪峰流量预报平均水平(40%)。总体来说,SCS模型对各类典型流域的山洪模拟效果较好,能够用于山洪灾害预报预警业务。SCS模型结构简单,参数少,特别适用于无资料地区推广应用。     

高坝泄洪诱发场地振动响应分析及传播规律

为研究高坝泄洪诱发场地振动的问题,提出一种基于黏弹性人工边界的有限元数值模拟和水力学模型试验相结合的方法计算场地振动响应。以国内某工程为例,计算不同工况下场地振动响应,分析泄洪量和泄洪调度方式对场地振动的影响,揭示不同岩体条件下振动波的传播规律。结果表明:该工程各种泄洪方式都不会对周边居民的生活造成影响;泄洪量越大,下游场地振动响应越大,当3个溢洪洞泄洪条件一致时,采用2号洞泄洪最不利;同等泄洪条件下,采用4洞均分泄洪的振动响应小于按设计开度泄洪的振动响应;模型范围内放大振动波的主因是断层左右岩体性质的差异,断层的存在进一步加大了放大效应。     

中置式高压电容器柜改进设计

分析了南屯煤矿白马河风井变电所高压电容器柜原设计方案存在的问题,并对其进行了改进设计:选用适用于容性负载的真空断路器;添加放电线圈,并将放电线圈与电容器直接并联,使放电线圈与电容器组成一个完整的放电回路;添加接地开关,接地开关既有机械闭锁又有电气联锁,操作方便,安全性高。实际应用表明,改进设计后的高压电容器柜功能更加完善,更加安全、可靠。     

Characterization of acoustic signals due to surface discharges on H.V. glass insulators using wavelet radial basis function neural networks

A hybrid model incorporating wavelet and radial basis function neural network is presented which is used to detect, identify and characterize the acoustic signals due to surface discharge activity and hence differentiate abnormal operating conditions from the normal ones. The tests were carried out on cleaned and polluted high voltage glass insulators by using surface tracking and erosion test procedure of international electrotechnical commission 60587. A laboratory experiment was conducted by preparing the prototypes of the discharges. This study suggests a feature extraction and classification algorithm for surface discharge classification, which when combined together reduced the dimensionality of the feature space to a manageable dimension, by “marrying” the wavelet to radial basis function neural network very high levels of classification are achieved. Wavelet signal treatment toolbox is used to recover the surface discharge acoustic signals by eliminating the noisy portion and to reduce the dimension of the feature input vector. A radial basis function neural network classifier was used to classify the surface discharge and assess the suitability of this feature vector in classification. This learning method is proved to be effective by applying the wavelet radial basis function neural network in the classification of surface discharge fault data set. The test results show that the proposed approach is efficient and reliable.     

Chemical composition and bond structure of carbon-nitride films deposited by CH4/N2 dielectric barrier discharge

Carbon nitride films have been deposited by dielectric barrier discharge with a CH₄/N₂ gas mixture at different conditions. Fourier Transform Infrared (FTIR) spectroscopy, X-ray photo electron spectroscopy (XPS), Raman spectroscopy, Atomic force microscopy (AFM) and ellipsometry were used to systematically study chemical composition, bond structure and surface morphology of deposited films. Various bonds between carbon, nitrogen, hydrogen, and also oxygen were observed.     

OBSERVATION ON SPUTTERING SURFACE OF ALLOYS IN GLOW DISCHARGE

Glow discharge cathodic sputtering of alloys containing second phase precipitates or injectedoxide particles has been observed with energy dispersive X-ray spectrometer and scanningelectron microprobe.It was shown that the formation of cones during the sputtering in thesealloys is due to masking of the matrix by glow sputtering second phase precipitates or oxideparticles.At steady state,the density of cottes were found to be a function of the densities pre-cipitates or oxide particles in bulk alloy.In addition to the changes of local sputtering rate,theelectrostatic effect may play a role on the formation fo cones.     

基于生态径流指标的水文情势变化评估新方法

基于流量历时曲线计算生态径流指标的方法存在诸多不足,也未形成相应的河流水文情势变化评估方法。采用流量过程线重新定义了月、季和年三种时间尺度的生态径流,构建了包含12个月生态盈余和12个月生态赤字的生态径流指标体系,提出了衡量这些指标在建库前后变化度的计算公式,基于月生态赤字发展了月生态风险评估方法,形成了一种河流生态水文情势变化评估方法。将其用于长江宜昌站,评估三峡工程在建库前后的生态水文情势变化。结果表明：重新定义的月、季、年生态径流之间消除了不一致性,香农多样性指数与年生态赤字的年际变化具有更高的相似度,变化度计算公式完全适用于衡量建库前后的变化程度,生态风险图使生态径流指标的实用性大为增强。     

Dressing of filigree fine-grained metal bonded grinding wheels

Metal bonded grinding tools offer a remarkable potential for micro grinding because of their favorable wear behavior. However, metal bonded grinding tools, especially dicing blades, are hard to dress by conventional dressing methods. Electro contact discharge dressing, which is presented in this paper, is a numerically controlled dressing process offering the possibility to create the geometry and topography of the grinding wheel simultaneously at negligible dressing forces. The power of an electric circuit thermally removes the metal bond of the grinding wheel during the dressing process. The quality of the created profiles and the influence of the dressing parameters on the specific material removal rate of the grinding tool as well as the wear of the electrode are investigated at fine-grained grinding wheels.     

Mn含量对Mg2Ni型合金相形成及放电性能的影响

采用按比例混合合金粉末压制成圆柱试样，然后用低温烧结和随后机械球磨的方法制备了非晶态的Mg2Ni型合金。研究了烧结和球磨对不同Mn含量的Mg2Ni型合金的相形成过程及电化学性能的影响。实验表明：在Mg2Ni中采用第三组元Mn对Mg进行适量的替代后，通过烧结及球磨方法可以获得均匀的非晶相；微量替代可有效地提高其放电容量：随替代量的增加，合金最大放电容量和高速放电能力降低，而充放电循环稳定性提高。     

Study On the Tribological Behavior of the Arc-added Glow Discharge Plasma Non-hydrogen Carburization On Titanium Alloy Surfaces

This paper introduces a new titanium alloys surface strengthening treatment by using the arc-added glow discharge plasmas non-hydrogen carburization technique. High purity and high strength graphite is selected as cooling cathode arc source for supplying carbon atoms and particle, which migrate to the titanium alloy(Ti6Al4V) surface and form modified layer. Thus, the hydrogen embrittlement is avoided while the tfibological behavior of the titanium alloy surface is improved in the respects of anti-friction and anti-wear ability.The tribological behavior of the modified layer under dry sliding against SAE52100 steel was evaluated on a ball-on-disc test rig. The results showed that the modified layer obtained a thickness of 30μm at 980℃, 30minutes. The microhardness of the Ti6Al4V alloy surface attained 936 HV, which was much larger than that of the Ti6AI4V alloy. The Ti6AI4V alloy was characterized by adhesion wear and scuffing under dry sliding against the steel, while the surface modified layer experienced much abated adhesion wear and scuffing under the same testing condition. This could be attributed to the carbon dement with different modalities exists in the modified layer.The modified layer showed good friction-reducing and fair anti-wear ability in dry sliding against the steel. Using the SEM,XRD and XPS, the phase structure and morphology of the carburization modified layer was analyzed.