Storage stability of a high protein food beverage powder prepared from the Nigerian ‘red skin’ groundnut (Arachis hypogaea) protein concentrates

A high protein, groundnut-based powder reconstitutable into a milk-like beverage was packed in polyethylene bags and in lacquered tin cans, and stored at both room temperature (25 ± 2°C) and in a domestic refrigerator (5 ± 2°C) for 60 days. Storage stability was evaluated by analysing periodically for changes in physical characteristics, proximate composition, and development of browning and rancidity, and assessing moisture sorption characteristics. Protein, lipid, total soluble sugars, peroxide value, total carbonyls and extinction values of the ethanolic extract remained practically constant during storage. The isotherm curves exhibited the characteristic sigmoidal shape typical of high protein foods. There was a greater increase in density, hygroscopicity and wettability in polyethylene-packed samples at both temperatures suggesting that the lacquered tin can leads to better keeping quality for this product.     

痕量分析中金溶液的稳定性

评述了痕量分析中,金标准溶液和天然水试样中痕量金贮存的稳定性及影响贮存的重要因素,提出了标准溶液配制和贮存的方法。     

长垣东部深井井壁失稳及技术对策

大庆油田在长垣东部深层油气田勘探开发过程中存在井眼不稳定问题。在对深层失稳井段资料调研的基础上，开展了易塌地层泥页岩水化膨胀及分散特性评价以及比亲水量研究。通过泥页岩--试液模拟作用的化学位差反渗透实验以及压力传递实验等，探讨了不同条件下泥页岩水化应力变化规律。利用井壁稳定性模拟实验装置（SHM仪），评价了不同钻井液防塌效果。理论分析和实验表明，当使用水基钻井液在复杂泥页岩地层钻进时，如何控制泥页岩压力传递和流体侵入是解决泥页岩井壁不稳的技术关键。使用长垣东部深层泥页岩与硅酸盐钻井液作用的实验表明，硅酸盐钻井液能显著降低泥岩渗透率，阻止钻井液滤液与孔隙压力的传递，改善膜效率，有助于充分发挥化学位差诱导的反渗透防塌作用效果。     

Synthesis and characterization of novel diimide–dinaphthols and resulting poly(urethane–imide)s

Novel diols containing imide groups were prepared via condensation of aromatic dianhydrides with 5‐amino‐1‐naphthol. The diimide–dinaphthols prepared were characterized by conventional methods and used to synthesize new poly(urethane–imide)s (PUIs). All the polymers were characterized and their physical properties, such as solubility, solution viscosity, thermal stability, and thermal behaviour were studied. The polymers obtained showed more thermal stability than typical polyurethanes because of the presence of the imide groups. Copyright © 2003 Society of Chemical Industry     

Conducting composites of polythiophene and polyfuran with acetylene black

Conducting composites of polythiophene (PTP) and polyfuran (PF) with acetylene black (AB) were prepared via chemical oxidative polymerization of thiophene and furan in a suspension of AB in CHCl₃ at room temperature using anhydrous FeCl₃ as the oxidant. Formation of PTP and PF and their subsequent incorporation in PTP–AB and PF–AB composite systems were confirmed by FTIR analysis. Scanning electron microscope analysis showed the presence of compact clusters of particles in both composites. Transmission electron micrographs of PTP–AB and PF–AB composites showed formation of globular polymer encapsulated AB particles with average diameters of the order of ～100 nm in both systems. Thermogravimetric analysis revealed that the overall thermal stability varied in the order: AB > PTP–AB > PTP and AB > PF–AB > PF. DC conductivity values for the PTP–AB and PF–AB composites were of the order of 10^?2 and 10^?3 S cm^?1, respectively. Copyright © 2004 Society of Chemical Industry     

Emulsifying Capacity and Emulsion Stability of Soy Proteins Compared with Corn Germ Protein Flour

Both emulsifying capacity (EC) and emulsion stability (ES) increased with increasing concentrations from 0.4% to 0.8% of soy flour (SF), soy concentrate (SC), soy isolate (SI) and corn germ protein flour (CGPF) when studied by response surface methodology. EC and ES increased as pH increased from 6 to 8 in all samples. Increasing incubation temperatures of protein solutions from 20–70°C or from 4–20°C did not affect EC or ES, respectively. SF had the highest EC, followd by SI, SC, and CGPF.     

Adhesive Dispensing Process Analysis: Steady-State Dispensing of One-Component Adhesives

The process of dispensing one-component heat-cure adhesives was investigated in order to understand current application processes and to guide new process development. Typical one-component adhesives exhibit non-Newtonian rheological behavior, and hence Newtonian fluid mechanics does not adequately describe the dispensing process. In the present study, the adhesives were modeled as Bingham fluids possessing a yield stress and a steady state viscosity. The model of the dispensing apparatus includes four major flow sections connected in a serial configuration. The fluid mechanics equations derived for Bingham fluids in the individual flow sections were solved by numerical methods in order to understand the interrelationships between the material variables (e.g. yield stress, viscosity, temperature dependencies) and process variables (e.g. pressure, flow geometry, temperature, output). The concept of the model is generic and the details of the model can be modified for any forced-flow adhesive application process.

The adhesive flow properties significantly influence the process output. Dispensing temperature, among the process variables, has the strongest effect on process output. A ± 1.0·C perturbation in the dispensing temperature can cause as much as a 14% variation in the bead size for the range of adhesives studied. Differences in flow characteristics result in differences in processability and non-linear temperature/pressure sensitivity. The non-linear sensitivity can be eliminated by operating the dispensing process isothermally. Finally, the process limits for one-component adhesives, which are susceptible to chemical instability induced by viscous heating during processing, are defined and discussed in terms of a modified Brinkman number that takes into account viscous dissipation, heat conduction and convection, and chemical stability of the material during processing.     

Structural reliability optimization using an efficient safety index calculation procedure

The objective of this paper is to conduct reliability-based structural optimization in a multidisciplinary environment. An efficient reliability analysis is developed by expanding the limit functions in terms of intermediate design variables. The design constraints are approximated using multivariate splines in searching for the optimum. The reduction in computational cost realized in safety index calculation and optimization are demonstrated through several structural problems. This paper presents safety index computation, analytical sensitivity analysis of reliability constraints and optimization using truss, frame and plate examples.