工程机械用800MPa低合金高强度钢焊接接头断裂韧性评价

对调质状态800MPa低合金高强度钢及其焊接接头进行了系列温度的断裂韧性测试,讨论不同焊接方法对焊接接头断裂韧性的影响。发现板材的轧制方向对断裂韧性影响显著,LT方向试件的断裂韧性远超过TL方向试件的断裂韧性。在-60℃以上,母材处于上平台延性断裂范畴。在-80℃,裂纹扩展过程中有延脆断裂模式的转变。焊条电弧焊焊缝的断裂韧性与气体保护焊焊缝的断裂韧性相当。尽管常温下焊缝金属的断裂韧性甚至优于母材,但随着试验温度的降低,焊缝金属的断裂韧性迅速下降。在-20℃已发生断裂模式转变,这在结构服役时要引起重视。本研究为大型工程机械的断裂安全评定奠定了基础。     

Continuity versus Discretization

The threefold interest in architecture, biology and mathematics motivated us to examine and justify new architectural forms. We discuss some notions of rhythm: Euclidean, morphogenetic and morphologic. Contemporary relationships between structure and form are based on the generation of shape by technological processes, thus the resulting objects are restricted to their material expression. Here a phenomenological organisation of form and its continuity with the landscape arise out of the mathematical and architectural creativity. The use of the computer is applied from outside to inside instead from inside to outside; this means that we are dealing with the organisational processes via continuous methods instead of evolutionary processes given by computer simulations, known as genetic algorithms, where the resulting configurations are reduced to a matter of routine. The role of design as an aesthetic component innovates the theoretical framework of structural engineering to establish the architectural environments.     

A review on mechanisms and recent developments of nanomaterials based carbon fiber reinforced composites for enhanced interface performance

Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength.     

电镀塑料制品对结构设计及成形工艺的要求

为保证电镀塑料制品的质量,提出了符合电镀要求的塑料制品设计原则,并且指出在注塑成形时,对塑料经过充分干燥,采用较高的注塑温度,较低的注射压力和较慢的注射速度,是使镀层获得良好结合强度的先决条件。     

Structural and electrical properties of mixed oxides of manganese and vanadium: A new semiconductor oxide thermistor material

Binary oxides of manganese and vanadium have been synthesized by solid state sintering, in which the mass ratio of the individual components Mn₂O₃ and VO₂ have been varied from 90:10 to 5:95. The bulk ceramic samples were characterized by X-ray diffraction and scanning electron microscopy with energy dispersive X-ray analysis. The initial compositions either rich in Mn₂O₃ or in equi-proportion by mass with VO₂ yield β-Mn₂V₂O₇ or a new crystalline form of Mn₂V₂O₇, with unit cell parameters: a = 7.73091 Å, b = 6.640788 Å, c = 6.70779 Å α = γ = 90° and β = 98.7086° which is designated as γ-Mn₂V₂O₇. The compositions, richer in VO₂ produce MnV₂O₆ co-existing with V₂O₅ the proportion of which increases with increase in VO₂. The surface microanalysis shows a spherical-granular morphology in Mn₂V₂O₇ structure and plate/rod-like structures co-existing with granular morphology in case of MnV₂O₆ together with V₂O₅. The electrical parameters of the negative temperature coefficient thermistors were determined. Depending on the constituent oxide composition, the NTC thermistors showed room temperature resistivity in the range of 6.52 × 10² to 6.1 × 10⁶ Ω-cm. The thermistor constant and activation energy are in the range of 0.12–0.458 eV and 1393–4801 K, respectively.     

On the use of energy minimization for CA based analysis in elasticity

There has been recent interest in exploring alternative computational models for structural analysis that are better suited for a design environment requiring repetitive analysis. The need for such models is brought about by significant increases in computer processing speeds, realized primarily through parallel processing. To take full advantage of such parallel machines, however, the computational approach itself must be revisited from a totally different perspective; parallelization of inherently serial paradigms is subject to limitations introduced by a requirement of information coordination. The cellular automata (CA) model of decentralized computations provides one such approach which is ideally tailored for parallel computers. The proposed paper examines the applicability of the cellular automata model in problems of 2-D elasticity. The focus of the paper is in the use of a genetic algorithm based optimization process to derive the rules for local interaction required in evolving the cellular automata. Received August 28, 2000     

The Other Mathematical Bridge

This paper contextualises, describes and discusses a student project which takes a particular exploratory approach to using mathematical surface definition as a language and vehicle for co-rational design co-authorship for architecture and engineering. The project has two authors, one from an architectural and one from an engineering educational background. It investigates the metaphorical and operational role of mathematics in the design process and outcomes.     

低密度、高强度DG型高变催化剂的研制

本文叙述了一种适合大型氨厂使用的、堆密度低到1.25 kg·L^-1、还原态侧压强度高达350 N·cm^-1以上、本体含硫＜500 ppm(wt)、低温活性好的高温变换催化剂的研制开发过程 还介绍了催化剂制备工艺特点和工业试用效果。