硝基氯苯的分离

本文叙述了根据硝氯苯的物化性质蒸气压方程，设计了采用高效波纹填料的新流程，并与国内外流程装置作比较，指明了新流程和新装置的优点。．     

Continuous production of structured phospholipids in a packed bed reactor with lipase from <Emphasis Type="Italic">Thermomyces lanuginosa</Emphasis>

The possibilities of producing structured phospholipids between soybean phospholipids and caprylic acid by lipase-catalyzed acidolysis were examined in continuous packedbed enzyme reactors. Acidolysis reactions were performed in both a solvent system and a solvent-free system with the commercially immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) as catalyst. In the packed bed reactors, different parameters for the lipase-catalyzed acidolysis were elucidated, such as solvent ratio (solvent system), temperature, substrate ratio, residence time, water content, and operation stability. The water content was observed to be very crucial for the acidolysis reaction in packed bed reactors. If no water was added to the substrate during reactions under the solvent-free system, very low incorporation corporation of caprylic acid was observed. In both solvent and solvent-free systems, acyl incorporation was favored by a high substrate ratio between acyl donor and phospholipids, a longer residence time, and a higher reaction temperature. Under certain conditions, the incorporation of around 30% caprylic acid can be obtained in continuous operation with hexane as the solvent. Presented at the 95th American Oil Chemists' Society Annual Meeting and Expo in Cincinnati, Ohio, May 10, 2004.     

Monodisperse‐porous poly(styrene‐co‐divinylbenzene) beads providing high column efficiency in reversed phase HPLC

A multistage polymerization protocol, the so‐called “modified seeded polymerization,” was developed for the production of monodisperse‐porous poly(styrene‐co‐divinylbenzene) providing high column efficiency as a packing material in reversed phase high performance liquid chromatography (RPLC). In the first stage of the multistage production, uniform polystyrene seed particles, produced by dispersion polymerization, were swollen by an organic agent (i.e., the diluent) and then by a monomer mixture containing styrene and divinylbenzene. The final porous particles were obtained in the monodisperse form by the polymerization of monomer mixture in the seed particles. By the use of a small size seed latex with low molecular weight and by the selection of the appropriate diluent, relatively small monodisperse‐porous particles with suitable pore structure could be achieved. In the reversed phase separation of alkylbenzenes, under isocratic conditions, theoretical plate numbers up to 40,000 plates/m were achieved by using 5.2 μm porous particles, obtained by a toluene‐dibutyl phthalate mixture as the diluent. No significant decrease in the resolution power was observed by the fourfold increase in the mobile phase flow rate. The column efficiency and the resolution observed with 5.2 μm monodisperse‐porous particles were significantly higher with respect to the currently available polymer based packing materials used in the reversed phase HPLC. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1430–1438, 2005     

新型氨氮复合分离流程及装备

开发了全填料结构的吸收，精馏、压缩冷凝新型复合分离流程及装备，用于精细化工氨氮废气（水）的处理，在获得高收率，高纯度的液氨产品同时，基本实现了气、液无污染排放。     

规整填料塔精馏的Marangoni效应

选用 6种代表性物系对陶瓷板波纹和不锈钢丝网规整填料进行全回流精馏实验 ,考察Marangoni效应对规整填料液体流动分布及传质的影响 .结果表明 :对纯有机体系 ,Marangoni效应影响较小 ;而对有机物的水溶液 ,Marangoni效应严重影响着填料的润湿和传质效率     

催化精馏合成异丙苯过程催化剂装填结构研究

为考察不同催化剂装填结构对催化精馏合成异丙苯过程的影响 ,在热态反应器中进行苯烃化催化精馏合成异丙苯的研究。反应器直径为 3 0mm ,高 2 0 0 0mm ,所用催化剂为 β改性沸石分子筛。操作压力0 .7MPa ,温度 43 0— 480K ,苯质量空速 4— 6h- 1 ,苯烯摩尔比 1.1— 2 .2 ,回流比 9— 2 0。催化剂装填结构由不锈钢填料与催化剂颗粒组成 ,三种装填结构的空隙率分别为 85 .1% ,81.6%和 79.4%。结果表明 ,对于异丙苯合成体系 ,装填结构对催化精馏的总体效果起决定性影响。在催化剂装填总量不变的前提下 ,异丙苯的选择性与丙烯的转化率均随催化剂装填结构空隙率的提高而提高。在优化条件下 ,异丙苯的选择性达97% ,丙烯转化率接近 10 0 %。催化剂装填结构对异丙苯选择性的影响比对丙烯转化率的影响更显著     

抗震冷却塔金属淋水填料研究

冷却塔的冷却效果主要由淋水填料的冷却数和冷却塔的有效高度决定,淋水填料的换热性能决定了冷却塔的主要换热效果。为提高抗震冷却塔的抗震效果,淋水填料采用金属填料。通过在某工程中抗震冷却塔金属填料与普通塑料填料应用的对比分析,研究金属填料的特点及适用性,为抗震冷却塔的设计提供依据。     

提高复合塔板操作弹性和通量研究

在内径为 5 0 0mm和 30 0mm的塔内 ,以空气 水为物系 ,测定了不同结构 (浮阀 筛孔穿流板、非均匀开孔率穿流板、双孔径穿流板 )的穿流板与 2 5 0Y规整填料组成的各种复合塔板的流体力学性能。试验结果表明 :浮阀 筛孔复合塔板操作弹性小、气液处理量小 ;非均匀板复合塔板与均匀板复合塔板相比 ,操作弹性大2 0 %— 6 0 % ,气处理量大 2 0 %— 80 % ,液处理量大 70 %左右 ;双孔径复合塔板比单孔径复合塔板处理量略微增大 ,操作弹性高达 3.5以上。     

填料技术在高浓度氯碱化工废水生物接触氧化法处理中应用的研究

阐述了填料技术在生物接触氧化法处理高浓度氯碱化工废水中的应用,介绍了目前国内外应用较广的几种主要填料的工艺特点,对它们的性能进行了比较;并结合锦化化工(集团)有限责任公司污水处理厂多年的生产运行经验,讨论了生物接触氧化法中应用的几种较理想的填料;扼要分析了填料技术的发展方向和前景。     

规整填料在铜洗塔中的应用研究

本文研究了铜洗液脱除合成气中少量ＣＯ、ＣＯ２的反应和传质吸收机理。分析了铜洗塔中应用高效规整填料所具有的技术优势，以及在设计改造中应注意的关键问题。模拟结果和应用效果表明，采用高效填料塔技术是合成氨装置扩大生产能力、提高合成气质量、降低成本的重要措施。